What we need to quote
The architectural or slab plan, which slab type it is - raft, waffle pod, suspended - the site address, approximate pour date, and any retaining wall or step-down engineering.
Pre-Construction Termite Barriers in Annangrove 2156 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Where Annangrove sits, who covers it and what it costs.
Annangrove is part of the Hills District, 34.5 km or so north-west of the GPO, and 2156 is a postcode we know well. We cover Annangrove on scheduled runs through the Hills District, and we will give you a firm time rather than a window.
Much of our Annangrove work is in the streets around Maria Iori Park.
Nelson, North Kellyville and Rouse Hill are all on the same route as Annangrove. Backing onto bush means re-entry is the issue, so proofing and the perimeter do the real work here.
Annangrove jobs tend to be homes on sloping blocks with a sub-floor and bush on the boundary. Let us know which when you ring and we will plan the visit around it.
Wherever you are in 2156, you are inside the area our technicians cover.
When you book, we confirm the 2156 run the day before and give you an arrival time rather than a window. If we are already out at Nelson or North Kellyville that morning, we will usually offer you the earlier slot.
Every pipe and conduit through the slab is a path. Each one needs its own collar or sealed detail, and the ones most often missed on Annangrove builds are the wet-area penetrations - shower wastes and bath traps.
A pre-construction barrier goes in while the slab is open. Once the concrete is poured and the frame is up, the same protection costs several times as much and never covers the same ground. On a Annangrove build this is genuinely a now-or-never detail.
People expect a barrier to be a guarantee. It is a managed zone: it either stops termites or forces them into the open where they are visible.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A termite-resistant physical layer across the prepared ground, installed before the pour and covering the whole slab footprint.

Collars sealed to every plumbing pipe, conduit and service that passes through the slab. These are the most common hidden entry points for termites.

A physical barrier runs round the slab edge and into the cavity, so no concealed tunnel can be built up the slab's exterior.

APVMA-registered termiticide applied to the soil, with the option of a reticulation pipe network so the barrier can be recharged later without digging.

Protection for bearers, piers and suspended timber floors on sloping or elevated sites.

Retaining walls, sandstone excavation, step-downs and cut-and-fill - all common in Sydney, all needing their own detailing.
Once the slab is poured, the areas termites use most are sealed away for good.
A barrier installed during the build costs far less than one retrofitted afterwards or any damage repair.
If a new Class 1 home or Class 10 outbuilding has termite-susceptible primary building elements, a compliant system is required.
Full protection of pipe penetrations and slab joints is possible only before the concrete is poured over them.
No post-construction treatment reaches under the slab. An under-slab system does.
The installation certificate and durable notice have to reach the certifier before the Occupation Certificate is issued.
Compliant, documented termite protection is something buyers, building inspectors and lenders all look for.
Talk to a licensed Sydney technician today - honest advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A physical layer - membrane, stainless mesh or graded stone - that termites cannot get through, beneath the slab or at its edge | Intended to last the life of the slab if not disturbed, and requires no chemical top-up | Slab-on-ground builds, and owners who want to avoid chemicals |
| Penetration collars | Physical collars sealed around all pipes and conduits penetrating the slab | Correctly installed before the pour, they last | All slabs, normally combined with a perimeter system |
| Chemical soil barrier | A treated zone created with termiticide in the soil below and around the building | The label and the soil conditions set the service life; it can be re-applied | Builds with tighter budgets, and some complex sites |
| Reticulation system | Pipework installed before paving so the soil can be re-treated by pumping | Can be topped up for the life of the building with no excavation of paths | Houses surrounded by paving or landscaped areas |
| Baiting (post-construction) | In-ground monitoring stations that take out the colony | Regular station servicing is required | Existing homes, covered under termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Plans and slab details to us, and you get a system recommendation plus a fixed price stage by stage.
Penetration collars fitted to all services, and an under-slab membrane or chemical treatment installed once the site is prepared.
Barriers to the perimeter and cavity go in alongside the brickwork or cladding, eliminating any slab-edge gap.
Where the design calls for it, the chemical perimeter or reticulation is completed around the finished building ahead of paving and landscaping.
The meter box carries a durable notice recording the system, and the builder and certifier each receive the installation certificate.
At handover the owner gets maintenance advice and a recommended inspection schedule so the system stays effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent meter box notice listing the system, installation date, life expectancy of any chemical used, the installer and inspection advice | The certifier, the owner and future owners |
| Installation certificate | Written confirmation covering the system and products used, the protected areas and the installer's licence | Builder, certifier, and the owner's own records |
| Product information | Details of the physical system or termiticide used, including safety data sheets for chemicals | Builder and owner |
| Maintenance & inspection advice | Maintenance guidance and the AS 3660.2 recommended inspection frequency | Homeowner |
The architectural or slab plan, which slab type it is - raft, waffle pod, suspended - the site address, approximate pour date, and any retaining wall or step-down engineering.
Scheduling works around the plumber's set-out and the concreter's pour. Let us know when services are in and we confirm collar installation ahead of the pour inspection.
Developers and volume builders work to consistent pricing with a single contact and documentation for every dwelling.
Missing durable notices and unclear installation records hold up occupation certificates regularly. We hand over the full set together.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area & perimeter length | Larger footprints need more membrane, more perimeter protection and more labour |
| System chosen | Full under-slab physical, perimeter-only, chemical and reticulation options are each priced differently |
| Service penetrations | Every plumbing and electrical penetration through the slab has to be collared |
| How complex the site is | Retaining walls, step-downs, sandstone excavation and suspended floors all add detailing |
| Site visits required | Staging follows the build program; multi-dwelling sites may be combined into fewer visits |
Send your plans for a fixed, written quote. There's no charge to quote.
The assumption that a new build is low risk is backwards. New construction on previously vegetated land is exactly where we see early activity.
A documented, serviced termite management system is something a Annangrove buyer's pest inspector will note favourably. The absence of paperwork is something they will note the other way.
Attached garages, pergolas, alfresco slabs and later additions all need to be in the system. On Annangrove builds the alfresco slab poured separately is the one most often left out.
We hold NSW Pest Management licence 5122967 and install to AS 3660.1.
We work to your builder's program, so a barrier stage never holds up a pour.
Durable notice, installation certificate and product details, all supplied.
One house, a granny flat, a duplex, or a full multi-unit project.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. Two things move it: how big the place is, and how far it has already spread. We work that out on the phone or on site and tell you the figure before anything starts in Annangrove. You get the AS 3660.1 certificate and the durable notice for the meter box.
At roughly 34.5 km north-west of the city, Annangrove is on a route we run regularly. We cover it on scheduled runs, so a day's notice gets you the best slot. You will be given a time, not a window.
Properties on a bush edge get re-supplied continuously. That is why our work in Annangrove is as much about the fence line and the perimeter as the inside of the house.
Mostly detached housing backing onto reserve. Proofing and the perimeter are what actually hold here.
We do. A lot of our Annangrove work is rentals and strata, so the report, the products used and the areas treated are all recorded in writing for whoever needs them.
Yes, applied correctly. Products are registered for this use, placed out of reach rather than across open surfaces, and you will know what to stay off and for how long.
You do not normally need to leave. Anything requiring an empty room is short, and you will know about it before the work starts.
Typically one to two hours on site. What extends it is size, access and how far the problem has gone, all of which are accounted for in the quote.
You get the AS 3660.1 certificate and the durable notice for the meter box. A return visit within the warranty period costs you nothing.
We do. Annangrove and Nelson, North Kellyville, Rouse Hill and Beaumont Hills are all on the same route, which helps if you own more than one property in the area.
Photographs from Elite jobs across Sydney — not stock imagery.
Insured, licensed technicians and a straight quote within 30 minutes - no obligation either way.