What we need to quote
Architectural plans or a slab plan, slab type (raft, waffle pod, suspended), the site address, approximate pour date and any engineering details for retaining walls or step-downs.
Pre-Construction Termite Barriers in Castlecrag 2068 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
What we cover in Castlecrag, and how quickly we can get there.
Our Lower North Shore technicians cover Castlecrag and the rest of 2068 as a matter of course - it is only about 7.6 km north of the city. Our technicians are through Castlecrag most days, so same-day attendance is usually available.
A lot of our Castlecrag jobs are in the streets around Northbridge Plaza and Northbridge Golf Club, and we are out near Cortile Reserve regularly enough that the technician usually knows the access before they arrive.
The suburb sits in the North Sydney, Mosman, Willoughby, Lane Cove and Hunters Hill area. Northbridge, Willoughby East and Middle Cove are all covered on the same day, so a problem that has spread across a boundary can be handled in one visit. Period homes near the harbour tend to have sub-floors, original timber and gardens running down to the boundary, so the inspection covers well beyond the kitchen.
Castlecrag jobs tend to be older homes near the water with a sub-floor that never fully dries. Let us know which when you ring and we will plan the visit around it.
Harold Reid Reserve and Clive Park Beach are on the same round, which means every part of 2068 is within our area.
When you book, we confirm the 2068 run the day before and give you an arrival time rather than a window. If we are already out at Northbridge or Willoughby East that morning, we will usually offer you the earlier slot.
Most Castlecrag builds are waffle pod or raft, and the two are detailed differently at the edge. Tell us which it is when you send the plans and the quote will be right first time.
A pre-construction barrier goes in while the slab is open. Once the concrete is poured and the frame is up, the same protection costs several times as much and never covers the same ground. On a Castlecrag build this is genuinely a now-or-never detail.
The system does not stop termites existing - it forces them into the open where an inspection will find them. That is why the annual check is part of the system rather than an optional extra.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A termite-resistant physical membrane laid across the prepared ground before the pour, protecting the whole footprint of the slab.

Collars sealed to every plumbing pipe, conduit and service that passes through the slab. These are the most common hidden entry points for termites.

A physical barrier around the slab edge and into the wall cavity, which stops termites building concealed tunnels up the outside of the slab.

APVMA-registered termiticide applied to the soil. Add a reticulation network and the barrier can be topped up later without digging anything up.

On a sloping or elevated site, the bearers, piers and suspended timber floor are all protected.

Retaining walls, sandstone excavation, step-downs and cut-and-fill - all common in Sydney, all needing their own detailing.
Once the slab is poured, the areas termites use most are sealed away for good.
The pre-construction price is far below what a retrofit costs, and nowhere near the cost of repairing damage.
New homes (Class 1) and outbuildings (Class 10) with termite-susceptible primary building elements need a compliant termite management system.
Before the pour is the only opportunity to fully protect the pipe penetrations and slab joints.
There are areas no later treatment can reach - an under-slab system covers them.
The installation certificate and durable notice have to reach the certifier before the Occupation Certificate is issued.
Having the termite protection documented and compliant reassures buyers, inspectors and lenders alike.
Talk to a licensed Sydney technician today - honest advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A physical layer - membrane, stainless mesh or graded stone - that termites cannot get through, beneath the slab or at its edge | Intended to last the life of the slab if not disturbed, and requires no chemical top-up | Slab-on-ground builds, and owners who want to avoid chemicals |
| Penetration collars | Each pipe and conduit through the slab is sealed with a physical collar | Long-lasting, assuming correct installation before the pour | Every slab, usually in combination with a perimeter system |
| Chemical soil barrier | A treated soil zone formed with termiticide under and around the structure | Label and soil conditions govern how long it lasts; re-application is possible | Cost-conscious builds and certain complex sites |
| Reticulation system | A pipe network put in ahead of paving, letting termiticide be pumped into the soil later | Rechargeable for as long as the building stands, without digging paths up | Homes enclosed by paving or landscaping |
| Baiting (post-construction) | Ground stations for monitoring, then baiting to eliminate the colony | The stations must be serviced regularly | Existing homes - see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Plans and slab details to us, and you get a system recommendation plus a fixed price stage by stage.
Every service through the slab is collared first, then the under-slab membrane or chemical treatment goes down on the prepared site.
While the brickwork or cladding goes up, the perimeter and cavity barriers are installed, leaving no gap at the slab edge.
A chemical perimeter or reticulation system, where specified, is completed around the building before any paving or landscaping.
The system is recorded on a durable notice fixed in the meter box, and the installation certificate goes to the builder and the certifier.
At handover the owner is given maintenance advice and the recommended inspection schedule that keeps the system effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent notice in the meter box recording the system, installation date, the life expectancy of any chemical used, the installer and inspection advice | The certifier, the owner and future owners |
| Installation certificate | Written confirmation of the system and products installed, the areas protected and the installer's licence | The builder, the certifier and the owner's records |
| Product information | Documentation of the physical system or termiticide applied, including chemical safety data sheets | Builder and owner |
| Maintenance & inspection advice | Advice on maintaining the barrier and the recommended inspection interval under AS 3660.2 | Homeowner |
Architectural plans or a slab plan, slab type (raft, waffle pod, suspended), the site address, approximate pour date and any engineering details for retaining walls or step-downs.
We work to the plumber's set-out and the concreter's program. Let us know when the services are in and collars are confirmed before the pour inspection.
Consistent pricing across the project, a single point of contact, and documentation for every lot or dwelling.
Missing durable notices or unclear installation records are a common reason for occupation certificate delays. We supply everything together so the certifier has what they need.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Size of slab and perimeter | Larger footprints take more membrane, more perimeter protection and more labour |
| Which system | A full under-slab physical system, a perimeter-only system, and chemical or reticulation options all price differently |
| Number of penetrations | Every plumbing and electrical penetration through the slab requires a collar |
| Complexity of the site | Retaining walls, step-downs, sandstone cuts and suspended floors each add detailing |
| Number of visits | The staged install follows your build program, and multi-dwelling sites can be combined |
Send your plans for a fixed, written quote. There's no charge to quote.
Our barrier work takes in Castlecrag and across toward Northbridge, on single builds and multi-lot developments alike.
A documented, serviced termite management system is something a Castlecrag buyer's pest inspector will note favourably. The absence of paperwork is something they will note the other way.
Anything attached to the structure is part of the structure as far as termites are concerned.
Licence 5122967 in NSW, and installations completed to AS 3660.1.
We attend to suit the builder's program, so the pour is never held up by a barrier stage.
Durable notice, installation certificate and product information, all handed over.
Whether it is one dwelling, a granny flat, a duplex or a multi-unit project.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. The fixed price depends on the size of the property and how far the problem has spread, and we confirm it before we start - there is no call-out fee in Castlecrag 2068. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Castlecrag is about 7.6 km north of the CBD in the Lower North Shore, and we give you a firm arrival time rather than an all-day window.
Harbourside blocks are often steep, with the lower level cut into the slope. Those lower levels stay cool and damp, which is where we usually find termites.
Older houses on sloping blocks, many with a lower level cut into the slope - that level is usually where we start.
We do all of those. A good share of the Castlecrag jobs we run are tenanted or strata properties, so the written record comes as standard.
It is, as long as you follow what we tell you on the day - usually keeping off treated surfaces for a couple of hours. Let us know at booking about young children, pets or an aquarium.
In the great majority of jobs, no. If one area needs to be left for an hour or two we say so before we start rather than after.
Allow an hour to two hours for most properties. A bigger building, or one where the problem has spread, takes longer - and we would rather tell you that when quoting than rush it.
You get the AS 3660.1 certificate and the durable notice for the meter box. That is the point of the warranty - you do not pay twice for the same problem.
Yes - we work right across the North Sydney, Mosman, Willoughby, Lane Cove and Hunters Hill area, which takes in Castlecrag and the suburbs around it.
Photographs from Elite jobs across Sydney — not stock imagery.
Insured, licensed technicians and a straight quote within 30 minutes - no obligation either way.