What we need to quote
Plans or slab plan, slab type (raft, waffle pod, suspended), site address, approximate pour date, and engineering details for retaining walls and step-downs.
Pre-Construction Termite Barriers in Clovelly 2031 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Where Clovelly sits, who covers it and what it costs.
Clovelly is part of the Eastern Suburbs, 6.9 km or so south-east of the GPO, and 2031 is a postcode we know well. Our technicians are through Clovelly most days, so same-day attendance is usually available.
Our Clovelly work takes in the streets by Clovelly Beach and Burnie Park, through to Bronte-Coogee Aquatic Reserve at the other end.
Under Waverley, Randwick and Woollahra, we cover Clovelly and Bronte, Coogee and Waverley alike. The coastal damp is the part that matters: sub-floors and ground-floor wet areas rarely dry out properly.
What we see in Clovelly is apartments where the problem is really in the building rather than the flat. Describing it accurately when you book saves a second visit.
Every part of 2031 is covered as standard.
You get a confirmed time, not a window. We plan the 2031 run the day before, and if Bronte or Coogee is on the same round there is often an earlier slot going.
People expect a barrier to be a wall. It is a managed zone: termites either cannot cross it or must build visible workings to do so.
The slab type changes the detail completely. A waffle pod slab has pods and perimeter beams to work around, a raft slab has different edge detailing, and a suspended floor needs the piers and bearers protected instead. We specify from the engineering, not from habit.
Every pipe and conduit through the slab is a path. Each one needs its own collar or sealed detail, and the ones most often missed on Clovelly builds are the wet-area penetrations - shower wastes and bath traps.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

The whole slab footprint is protected by a termite-resistant membrane laid onto the prepared ground before concrete goes down.

Each pipe, conduit and service crossing the slab is sealed with a collar - penetrations being the most common concealed entry.

A physical barrier at the slab edge and continuing into the wall cavity, preventing concealed tunnelling up the slab's outside face.

The soil is treated with an APVMA-registered termiticide, and a reticulation network can be laid so recharging never means digging.

Piers, bearers and suspended timber floors protected, which matters on sloping and elevated blocks.

Detailing for the complications Sydney blocks throw up: retaining walls, sandstone excavation, step-downs and cut-and-fill.
Once the slab is poured, the areas termites use most are sealed away for good.
A pre-construction barrier costs far less than a retrofitted system or repairs to termite damage later.
Class 1 homes and Class 10 outbuildings with termite-susceptible primary building elements must have a compliant termite management system.
Once concrete covers them, pipe penetrations and slab joints cannot be fully protected - it has to happen before the pour.
Areas no post-construction treatment can ever reach are covered by an under-slab system.
No Occupation Certificate is issued without the installation certificate and durable notice going to the certifier.
Documented, compliant termite protection reassures buyers, building inspectors and lenders.
Get a licensed Sydney technician on the phone today - honest advice, fixed quote in 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A physical layer - membrane, stainless mesh or graded stone - that termites cannot get through, beneath the slab or at its edge | Intended to last the life of the slab if not disturbed, and requires no chemical top-up | Slab-on-ground builds, and owners who want to avoid chemicals |
| Penetration collars | Collars sealed physically to every pipe and conduit through the slab | Durable when fitted correctly ahead of the pour | All slabs, normally combined with a perimeter system |
| Chemical soil barrier | Termiticide creating a treated zone in the soil beneath and around the building | Service life is set by the product label and the soil, and it can be re-applied | Builds working to a budget, and some complex sites |
| Reticulation system | A pipe network installed ahead of paving, allowing the soil to be re-treated by pumping | Can be topped up throughout the building's life without digging up paving | Homes surrounded by paving or heavy landscaping |
| Baiting (post-construction) | In-ground monitoring stations that eliminate the colony | Stations need regular servicing | Existing homes, see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Give us the plans and slab details; back comes a recommended system and a fixed price for every stage.
All service penetrations are collared, and the under-slab membrane or chemical treatment goes in once the site is prepared.
While the brickwork or cladding goes up, the perimeter and cavity barriers are installed, leaving no gap at the slab edge.
Where the design calls for it, the chemical perimeter or reticulation is completed around the finished building ahead of paving and landscaping.
A durable notice in the meter box records the system. The installation certificate goes to the builder and certifier.
Maintenance advice and an inspection schedule go to the owner, so the system keeps doing its job.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent record in the meter box: the system, the date installed, the life expectancy of any chemical, the installer, and inspection advice | The certifier, the owner and any future owner |
| Installation certificate | Confirms in writing the system and products installed, the areas protected and the installer's licence | The builder, the certifier, and the owner's records |
| Product information | Details of the physical system or termiticide used, including safety data sheets for chemicals | Builder and owner |
| Maintenance & inspection advice | Advice on maintaining the barrier and the recommended inspection interval under AS 3660.2 | Homeowner |
Plans or slab plan, slab type (raft, waffle pod, suspended), site address, approximate pour date, and engineering details for retaining walls and step-downs.
Scheduling works around the plumber's set-out and the concreter's pour. Let us know when services are in and we confirm collar installation ahead of the pour inspection.
Developers and volume builders work to consistent pricing with a single contact and documentation for every dwelling.
The common cause of occupation certificate delay is a missing durable notice or unclear records - so we supply everything together.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area and perimeter | A bigger footprint means more membrane, more perimeter work and more hours |
| System type | Full under-slab physical systems, perimeter-only systems and chemical or reticulation options are priced differently |
| How many services | Each service penetrating the slab, plumbing or electrical, needs a collar |
| Site complexity | Retaining walls, step-downs, sandstone excavation and suspended floors add detailing |
| Site visits required | Staging follows the build program; multi-dwelling sites may be combined into fewer visits |
Send your plans for a fixed, written quote. There's no charge to quote.
An addition to a protected house is a new entry point unless it is tied into the existing system. We treat it as part of the whole, not a separate job.
The failures we are called to inspect are rarely the product. They are a collar missed on a late-added pipe, a perimeter left short at a step-down, or a membrane torn by a trade after we left and never reported.
Estates built on cleared farmland inherit the colonies already living in that soil. A new Clovelly house is not a fresh start from a termite point of view - it is a new food source on an established site.
NSW Pest Management licence 5122967, with installations to AS 3660.1.
Our scheduling follows the builder's program - a barrier stage will not hold up your pour.
Durable notice, installation certificate and product information, all handed over.
Whether it is one dwelling, a granny flat, a duplex or a multi-unit project.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. Two things move it: how big the place is, and how far it has already spread. We work that out on the phone or on site and tell you the figure before anything starts in Clovelly. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Our Eastern Suburbs technicians cover Clovelly daily, and you get a confirmed arrival time when you book.
Coastal suburbs hold moisture. Sandy soil drains but the air does not dry out, so the conditions under a Clovelly house suit termites nearly all year.
Apartments near the beach and houses behind them. Either way the sub-floor and the lower level are the parts that matter.
We do. A lot of our Clovelly work is rentals and strata, so the report, the products used and the areas treated are all recorded in writing for whoever needs them.
Yes. The products are registered for this use and applied at label rates, and placement keeps them away from where children and animals go. Let us know at booking about pets, fish tanks or anyone with asthma and we will plan the visit around it.
Usually not. Most pre-construction termite barriers work is done with you there, and anything that needs the room vacated is for a short period we will tell you about beforehand.
Usually between one and two hours on site. Bigger properties and heavier infestations take more, and that is included in the quote rather than added afterwards.
You get the AS 3660.1 certificate and the durable notice for the meter box. Ring us if activity picks up again inside that period and we will arrange the return.
We do. Clovelly and Bronte, Coogee, Waverley and Tamarama are all on the same route, which helps if you own more than one property in the area.
Photographs from Elite jobs across Sydney — not stock imagery.
Fast and fully insured, with a no-obligation quote back to you within 30 minutes.