What we need to quote
Architectural or slab plans, slab type - raft, waffle pod or suspended - site address, approximate pour date, plus engineering details on any retaining walls or step-downs.
Pre-Construction Termite Barriers in Erskine Park 2759 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Where Erskine Park sits, who covers it and what it costs.
Erskine Park sits about 38.2 km west of the CBD in the Penrith & the Outer West, and postcode 2759 is one we are in most weeks. We cover Erskine Park on scheduled runs through the Penrith & the Outer West, and we will give you a firm time rather than a window.
A good share of our Erskine Park work is in the streets around Spica Place Reserve and St Clair Shopping Centre.
We work under the Penrith City and Hawkesbury area here, and St Clair, Colyton and Minchinbury are all on the same route, which matters when termite problems are moving between adjoining properties. With acreage the problem is often outside the house entirely - sheds, woodpiles and outbuildings get inspected too.
Erskine Park jobs tend to be rural-residential homes where it started in a stable or a feed store. Let us know which when you ring and we will plan the visit around it.
All of 2759 falls inside the area we service.
We confirm your slot the day before and arrive at a stated time. St Clair and Colyton sit on the same run, so earlier appointments in 2759 come up regularly.
Most Erskine Park builds are waffle pod or raft, and the two are detailed differently at the edge. Tell us which it is when you send the plans and the quote will be right first time.
AS 3660.1 is the standard for termite management in new construction, and it is what the certifier signs against. A Erskine Park build without a compliant, certified system does not get its occupation certificate.
Tell whoever does the landscaping on your Erskine Park build to keep soil, mulch and paving below the slab edge. It is the single most common way a good system is quietly defeated.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A sheet membrane that termites cannot pass, laid across the prepared ground before the pour so the entire footprint is covered.

Each service penetrating the slab - pipe, conduit, cable - takes a sealed collar. Penetrations are where termites most often get in unseen.

Slab edge and wall cavity are both barriered, blocking the concealed tunnels termites otherwise build up the outside.

Termiticide registered with the APVMA goes into the soil, and a reticulation pipe network can be added so later recharging needs no digging.

Piers, bearers and suspended timber floors protected, which matters on sloping and elevated blocks.

Retaining walls, sandstone cuts, step-downs and cut-and-fill sites are detailed individually - all of them common here.
Once the slab is poured, the areas termites use most are sealed away for good.
Doing it now is far cheaper than retrofitting a system later, and cheaper again than repairing termite damage.
Under the NCC, Class 1 homes and Class 10 outbuildings with termite-susceptible primary building elements require a compliant termite management system.
The only time pipe penetrations and slab joints can be properly protected is before the concrete covers them.
Under-slab protection reaches areas that post-construction treatment simply cannot.
Your certifier needs the installation certificate and durable notice before issuing the Occupation Certificate.
Documented compliance on termite protection reassures the buyer, their inspector and the lender.
Talk to a licensed Sydney technician today - honest advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | Membrane, stainless mesh or graded stone forming a layer termites cannot pass, beneath the slab or around the perimeter | Designed to last as long as the slab itself if undisturbed; no top-ups | Slab-on-ground construction and non-chemical preferences |
| Penetration collars | Collars physically sealed to every pipe and conduit through the slab | Long-lived where installation before the pour is done properly | Every slab, and typically with a perimeter system as well |
| Chemical soil barrier | Treated soil - termiticide applied beneath and around the building | Longevity depends on label and soil conditions, and it can be renewed | Cost-conscious builds, and some complex sites |
| Reticulation system | A pre-paving pipe network allowing termiticide to be pumped back into the soil | Rechargeable over the building's life without lifting any paving | Homes surrounded by paving or landscaping |
| Baiting (post-construction) | Ground stations used for monitoring and then baiting out the colony | Regular servicing of each station is required | For existing homes, see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Send us your plans and slab details. We recommend a system and give you a fixed price for every stage.
Collars go onto every service penetration, and once the site is prepared the under-slab membrane or the chemical treatment is installed.
Perimeter and cavity barriers installed as the brickwork or cladding goes up, so there is no gap at the slab edge.
Where specified, we complete the chemical perimeter or reticulation around the finished building, before paving and landscaping.
The system is recorded on a durable notice in the meter box, and the installation certificate goes to both the builder and the certifier.
The owner receives the maintenance guidance and an inspection schedule, which is what keeps the system doing its job.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | Fixed permanently in the meter box, recording the system, install date, chemical life expectancy, installer and inspection advice | Certifier, current owner and future owners |
| Installation certificate | Written confirmation covering the system and products used, the protected areas and the installer's licence | Builder, certifier, and the owner's own records |
| Product information | The details of whichever physical system or termiticide was used, with safety data sheets for any chemical | Builder and owner |
| Maintenance & inspection advice | Keeping the barrier effective, and how often to inspect under AS 3660.2 | The homeowner |
Architectural or slab plans, slab type - raft, waffle pod or suspended - site address, approximate pour date, plus engineering details on any retaining walls or step-downs.
We work to the plumber's set-out and the concreter's program. Let us know when the services are in and collars are confirmed before the pour inspection.
Volume builders and developers get the same pricing throughout, a single contact, and paperwork for each lot or dwelling.
A missing durable notice or unclear installation record is a common cause of occupation certificate delay. We supply the lot together so the certifier has everything.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Footprint and perimeter | More area means more membrane, more perimeter protection and more time on site |
| System type | There is a real price difference between under-slab physical, perimeter-only, chemical and reticulation systems |
| Number of penetrations | A collar is needed for each plumbing and electrical penetration through the slab |
| Site complexity | Retaining walls, step-downs, sandstone excavation and suspended floors all require extra detailing |
| Site visits required | Staging follows the build program; multi-dwelling sites may be combined into fewer visits |
Send your plans for a fixed, written quote. There's no charge to quote.
An addition to a protected house is a new entry point unless it is tied into the existing system. We treat it as part of the whole, not a separate job.
Clearing removes the trees, not the nests. Stumps and root systems left in the ground around Erskine Park developments keep colonies alive right under the new slabs.
The failures we are called to inspect are rarely the product. They are a collar missed on a late-added pipe, a perimeter left short at a step-down, or a membrane torn by a trade after we left and never reported.
We hold NSW Pest Management licence 5122967 and install to AS 3660.1.
Our scheduling follows the builder's program - a barrier stage will not hold up your pour.
Everything the certifier wants: durable notice, installation certificate, product details.
Single dwellings, granny flats, duplexes and multi-unit developments.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. There is no call-out charge in Erskine Park 2759. The final number comes down to the property itself, and it is fixed before we begin. You get the AS 3660.1 certificate and the durable notice for the meter box.
We cover it on scheduled runs, so a day's notice gets you the best slot. We are about 38.2 km west of the city here, and Erskine Park is covered by the Penrith & the Outer West team.
Out here the problem is normally outside the building. We inspect the outbuildings and the stored timber because that is where termites are actually established.
Large blocks where the shed, the feed store or the woodpile is as likely to be the problem as the house itself.
Yes. We work in houses, units, strata blocks, rentals and commercial premises across Erskine Park 2759, and we provide the written report agents and strata managers ask for.
Yes, when it is applied properly. We use registered products at label rates and tell you which areas to keep clear and for how long. Mention pets, fish tanks or allergies when you book.
Generally no. We will tell you on arrival if any part of the job means keeping out of a room for a while, so there are no surprises.
An hour to two hours covers most jobs. The size of the building and the extent of the problem are what change it.
You get the AS 3660.1 certificate and the durable notice for the meter box. If activity continues past the expected period, call us and we will come back.
We do. Erskine Park and St Clair, Colyton, Minchinbury and Eastern Creek are all on the same route, which helps if you own more than one property in the area.
Photographs from Elite jobs across Sydney — not stock imagery.
Friendly, fully insured technicians and a no-obligation quote inside 30 minutes.