What we need to quote
We need the architectural or slab plan, the slab type (raft, waffle pod, suspended), the address, a rough pour date, and engineering details for retaining walls or step-downs.
Pre-Construction Termite Barriers in Frenchs Forest 2086 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
What we cover in Frenchs Forest, and how quickly we can get there.
Postcode 2086 covers Frenchs Forest and the streets immediately around it. At about 13.6 km north of the CBD it falls in the Northern Beaches, where we have vans out daily. We run Frenchs Forest on a regular route, and same-day attendance is usually available.
If you are near Jindabyne Reserve, Forestway Shopping Centre or Wareham Reserve, that is ground we cover constantly - it is the busiest part of Frenchs Forest for us.
We work under the Northern Beaches area here, and Forestville, Oxford Falls and Allambie Heights are all on the same route, which matters when termite problems are moving between adjoining properties. The coastal damp is the part that matters: sub-floors and ground-floor wet areas rarely dry out properly.
Most Frenchs Forest bookings come in as unit blocks a street or two back from the water, plus the odd beachfront cafe. Say which one applies when you call 1300 313 373 and the technician will have the right products on the van.
Warringah Aquatic Centre and the remainder of 2086 are on the same run.
We confirm your slot the day before and arrive at a stated time. Forestville and Oxford Falls sit on the same run, so earlier appointments in 2086 come up regularly.
A barrier is a continuous system, so it fails at the join. On Frenchs Forest sites the usual culprits are a penetration added after our visit and a section of slab edge covered before anyone inspected it.
Retro-fitting means drilling and injecting a finished slab, working around landscaping and services. It is slower, more expensive and less complete than doing it at construction on a Frenchs Forest block.
A compliant barrier does not mean termites can never reach the building. It means they cannot reach it concealed - they have to build workings where an inspection will find them. That is why the annual inspection is part of the system, not an upsell.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A termite-resistant physical membrane laid across the prepared ground before the pour, protecting the whole footprint of the slab.

Collars sealed to every plumbing pipe, conduit and service that passes through the slab. These are the most common hidden entry points for termites.

Slab edge and wall cavity are both barriered, blocking the concealed tunnels termites otherwise build up the outside.

APVMA-registered termiticide into the soil, with optional reticulation pipework for recharging the barrier later without excavation.

Sloping and elevated blocks get their piers, bearers and suspended timber floors protected.

Detailing for the complications Sydney blocks throw up: retaining walls, sandstone excavation, step-downs and cut-and-fill.
Once the slab is poured, the areas termites use most are sealed away for good.
Compared with a retrofit - or with repairing damage - a pre-construction barrier is a small cost.
If a new Class 1 home or Class 10 outbuilding has termite-susceptible primary building elements, a compliant system is required.
The only time pipe penetrations and slab joints can be properly protected is before the concrete covers them.
Areas no post-construction treatment can ever reach are covered by an under-slab system.
The certifier needs the installation certificate and the durable notice in hand to issue the Occupation Certificate.
Documented, compliant termite protection reassures buyers, building inspectors and lenders.
A licensed Sydney technician will talk it through and give you a fixed quote within half an hour.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | Membrane, stainless mesh or graded stone forming a layer termites cannot pass, beneath the slab or around the perimeter | Designed to last as long as the slab itself if undisturbed; no top-ups | Slab-on-ground construction and non-chemical preferences |
| Penetration collars | Physical collars sealed around all pipes and conduits penetrating the slab | Correctly installed before the pour, they last | All slabs, normally combined with a perimeter system |
| Chemical soil barrier | A treated zone of termiticide in the soil under and around the building | Service life depends on the product label and soil conditions. It can be re-applied. | Budget-conscious builds and some complex sites |
| Reticulation system | A network of pipes installed before paving so termiticide can be re-injected into the soil | Rechargeable throughout the building's life, with no need to dig up paths | Homes with paving or landscaping all around them |
| Baiting (post-construction) | Monitoring stations set into the ground, baited to eliminate the colony | Regular servicing of the stations is needed | For existing homes, see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Send the plans and slab details - we will specify a system and fix the price for each stage.
Collars go onto every service penetration, and once the site is prepared the under-slab membrane or the chemical treatment is installed.
The perimeter and cavity barriers are fitted as brickwork or cladding progresses, so there is never a gap at the slab edge.
Where it is specified, the chemical perimeter or reticulation system is finished around the completed building before any paving or landscaping goes in.
A durable notice in the meter box documents the system; the installation certificate is issued to the builder and certifier.
At handover the owner gets maintenance advice and a recommended inspection schedule so the system stays effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent meter box notice listing the system, installation date, life expectancy of any chemical used, the installer and inspection advice | The certifier, the owner and future owners |
| Installation certificate | A written statement of system, products, protected areas and installer licence | Builder, certifier and the owner's records |
| Product information | The details of whichever physical system or termiticide was used, with safety data sheets for any chemical | Builder and owner |
| Maintenance & inspection advice | Advice on maintaining the barrier and the recommended inspection interval under AS 3660.2 | Homeowner |
We need the architectural or slab plan, the slab type (raft, waffle pod, suspended), the address, a rough pour date, and engineering details for retaining walls or step-downs.
We schedule to the plumber's set-out and the concreter's pour, confirming collar installation before the pour inspection once services are in.
Developers and volume builders get consistent pricing, a single point of contact and documentation for every lot or dwelling.
Occupation certificate delays usually trace to a missing durable notice or poor records. We give the certifier the full set in one go.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area & perimeter length | The bigger the footprint, the more membrane, perimeter protection and labour required |
| System chosen | Full under-slab physical, perimeter-only, chemical and reticulation options are each priced differently |
| Number of penetrations | Every plumbing and electrical penetration through the slab needs a collar |
| Difficulty of the site | Retaining walls, step-downs, sandstone excavation and suspended floors add to the detailing |
| Number of site visits | Staged installations follow the build program. Multi-dwelling sites may be combined. |
Send your plans for a fixed, written quote. There's no charge to quote.
Attached garages, pergolas, alfresco slabs and later additions all need to be in the system. On Frenchs Forest builds the alfresco slab poured separately is the one most often left out.
A documented, serviced termite management system is something a Frenchs Forest buyer's pest inspector will note favourably. The absence of paperwork is something they will note the other way.
Anywhere in Frenchs Forest is within the area we attend for pre-construction work, including sites the larger operators will not travel to.
NSW Pest Management licence 5122967, installing to the AS 3660.1 standard.
Scheduled around the builder's program, so a barrier stage does not delay the pour.
Everything the certifier wants: durable notice, installation certificate, product details.
Single dwellings and granny flats through to duplexes and multi-unit developments.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. Two things move it: how big the place is, and how far it has already spread. We work that out on the phone or on site and tell you the figure before anything starts in Frenchs Forest. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Our Northern Beaches technicians cover Frenchs Forest daily, and you get a confirmed arrival time when you book.
Humidity close to the coast does not fall away in winter the way it does inland, so termites here get a longer active season than they would further west.
A mix of unit blocks and houses, most with a damp sub-floor or a ground level that sits low - and that is usually where we concentrate.
Yes. Houses, townhouses, units, strata common property, rentals and commercial sites in Frenchs Forest 2086 are all part of what we do, and the paperwork is the kind agents accept.
Yes, when it is applied properly. We use registered products at label rates and tell you which areas to keep clear and for how long. Mention pets, fish tanks or allergies when you book.
In most cases you can stay. Where an area does need to be left clear it is for a couple of hours at most, and we say so before we start.
Typically one to two hours on site. What extends it is size, access and how far the problem has gone, all of which are accounted for in the quote.
You get the AS 3660.1 certificate and the durable notice for the meter box. A return visit within the warranty period costs you nothing.
We cover the whole of Frenchs Forest, from the streets around Jindabyne Reserve out to the suburb boundary and on into Forestville.
Photographs from Elite jobs across Sydney — not stock imagery.
Fast, friendly, fully insured technicians. No-obligation quote within 30 minutes.