What we need to quote
We need the architectural or slab plan, the slab type (raft, waffle pod, suspended), the address, a rough pour date, and engineering details for retaining walls or step-downs.
Pre-Construction Termite Barriers in Henley 2111 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Local technicians, fixed prices and a written report for every job in Henley.
Our Ryde & the Northern District technicians cover Henley and the rest of 2111 as a matter of course - it is only about 7.5 km north-west of the city. Our technicians are through Henley most days, so same-day attendance is usually available.
Most weeks we are somewhere between Gladesville Shopping Centre and Cabarita Shopping Centre in Henley, and Betts Park is close enough to be on the same run.
We cover Huntleys Cove, Chiswick and Huntleys Point on the same runs as Henley, which helps when termite problems are moving between neighbouring properties. Terraces, semis and converted blocks share cavities and risers, which is why a single-unit treatment often does not hold on its own.
What we see in Henley is older semis with a paved rear courtyard and a sub-floor that no longer dries out. Describing it accurately when you book saves a second visit.
Heydon Park and Parramatta River Regional Park are on the same round, which means every part of 2111 is within our area.
The 2111 run is set the day before and you are given an arrival time. Where Huntleys Cove and Chiswick fall on the same round, we can usually bring the visit forward.
A suspended floor is a different job again - the protection goes to piers, bearers and the subfloor rather than under a slab. On sloping Henley blocks that is common.
The value of the system on a Henley home is detectability. Without the inspections that detectability is never used.
A barrier is a continuous system, so it fails at the join. On Henley sites the usual culprits are a penetration added after our visit and a section of slab edge covered before anyone inspected it.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A termite-resistant physical layer across the prepared ground, installed before the pour and covering the whole slab footprint.

Each pipe, conduit and service crossing the slab is sealed with a collar - penetrations being the most common concealed entry.

A physical barrier around the slab edge and into the wall cavity, which stops termites building concealed tunnels up the outside of the slab.

APVMA-registered termiticide into the soil, with optional reticulation pipework for recharging the barrier later without excavation.

Piers, bearers and suspended timber floors protected, which matters on sloping and elevated blocks.

Sydney sites bring retaining walls, sandstone excavation, step-downs and cut-and-fill, each of which needs specific detailing.
Once the slab is poured, the areas termites use most are sealed away for good.
The pre-construction price is far below what a retrofit costs, and nowhere near the cost of repairing damage.
Under the NCC, Class 1 homes and Class 10 outbuildings with termite-susceptible primary building elements require a compliant termite management system.
Before the pour is the only opportunity to fully protect the pipe penetrations and slab joints.
No post-construction treatment reaches under the slab. An under-slab system does.
The Occupation Certificate will not be issued until the certifier has the installation certificate and durable notice.
Buyers, building inspectors and lenders all take comfort from documented, compliant termite protection.
Talk to a licensed Sydney technician today - honest advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | Membrane, stainless mesh or graded stone forming a layer termites cannot pass, beneath the slab or around the perimeter | Designed to last as long as the slab itself if undisturbed; no top-ups | Slab-on-ground construction and non-chemical preferences |
| Penetration collars | Each pipe and conduit through the slab is sealed with a physical collar | Long-lasting, assuming correct installation before the pour | Every slab, usually in combination with a perimeter system |
| Chemical soil barrier | Soil treated with termiticide to form a zone under and around the structure | Service life depends on label and soil, with re-application possible | Budget-conscious projects and certain complex sites |
| Reticulation system | A pipe network installed ahead of paving, allowing the soil to be re-treated by pumping | Can be topped up throughout the building's life without digging up paving | Homes surrounded by paving or heavy landscaping |
| Baiting (post-construction) | In-ground stations used to monitor and eliminate the colony | Stations have to be serviced regularly | Existing homes. See termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
With your plans and slab details we recommend a system and price every stage, fixed.
Penetration collars to all services first, then the under-slab membrane or chemical treatment once the site is ready.
The perimeter and cavity barriers are fitted as brickwork or cladding progresses, so there is never a gap at the slab edge.
Where specified, a chemical perimeter or reticulation system is completed around the finished building before paving and landscaping.
The system is recorded on a durable notice in the meter box, and the installation certificate goes to both the builder and the certifier.
At handover the owner is given maintenance advice and the recommended inspection schedule that keeps the system effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent notice in the meter box recording the system, installation date, the life expectancy of any chemical used, the installer and inspection advice | The certifier, the owner and future owners |
| Installation certificate | Written confirmation of the system and products installed, the areas protected and the installer's licence | The builder, the certifier and the owner's records |
| Product information | Documentation of the physical system or termiticide applied, including chemical safety data sheets | Builder and owner |
| Maintenance & inspection advice | How the barrier is kept effective, plus the inspection frequency AS 3660.2 recommends | The homeowner |
We need the architectural or slab plan, the slab type (raft, waffle pod, suspended), the address, a rough pour date, and engineering details for retaining walls or step-downs.
We schedule around the plumber's set-out and the concreter's pour. Tell us when services are in and we will confirm the collar installation before the pour inspection.
Volume builders and developers get the same pricing throughout, a single contact, and paperwork for each lot or dwelling.
Delays at occupation certificate stage usually come down to a missing durable notice or unclear records. We provide the complete set at once.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab size and perimeter run | Larger slabs need more membrane and perimeter protection, and more labour |
| Type of system | Pricing differs between full under-slab physical systems, perimeter-only systems, and chemical or reticulation options |
| Number of penetrations | A collar is needed for each plumbing and electrical penetration through the slab |
| Site complexity | Retaining walls, step-downs, sandstone excavation and suspended floors add detailing |
| Site visits required | Staging follows the build program; multi-dwelling sites may be combined into fewer visits |
Send your plans for a fixed, written quote. There's no charge to quote.
Clearing removes the trees, not the nests. Stumps and root systems left in the ground around Henley developments keep colonies alive right under the new slabs.
We install across 2111 and the surrounding Ryde & the Northern District - new builds, knock-down rebuilds, extensions and owner-builder projects around Gladesville Shopping Centre and beyond.
Clay soils also hold moisture against the slab, which is the condition termites want. The barrier matters more on those blocks, not less.
NSW Pest Management licence 5122967. Every installation is to AS 3660.1.
Our scheduling follows the builder's program - a barrier stage will not hold up your pour.
We supply the durable notice, the installation certificate and the product details.
Single homes, granny flats, duplexes and multi-unit developments alike.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. Two things move it: how big the place is, and how far it has already spread. We work that out on the phone or on site and tell you the figure before anything starts in Henley. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Henley sits roughly 7.5 km north-west of the CBD, inside our Ryde & the Northern District run, so we book a time and keep to it.
Older inner suburbs combine shared structure with ageing drainage, and termites exploit both. Rear courtyards that have been paved over make it worse by trapping damp against the walls.
Older joined housing. The treatment takes account of shared walls, continuous sub-floors and roof voids that run between properties.
Yes - freestanding homes, townhouses, apartments, rentals and business premises in Henley 2111 are all covered, with documentation suitable for an agent or a strata manager.
It is, applied properly. We put product into cracks, voids and stations rather than across open surfaces, and we will tell you what to stay off and for how long before we leave.
You do not normally need to leave. Anything requiring an empty room is short, and you will know about it before the work starts.
For a standard Henley home, one to two hours. We would rather tell you it will take longer up front than rush it.
You get the AS 3660.1 certificate and the durable notice for the meter box. Call us if activity picks up again and we will arrange the return visit.
Yes. As well as Henley we cover Huntleys Cove, Chiswick, Huntleys Point and Abbotsford on the same runs, so a job that crosses a boundary can be handled in one visit.
Photographs from Elite jobs across Sydney — not stock imagery.
Friendly, fully insured technicians and a no-obligation quote inside 30 minutes.