What we need to quote
Send the architectural or slab plan, the slab type - raft, waffle pod or suspended - the site address, an approximate pour date, and engineering details for any retaining walls or step-downs.
Pre-Construction Termite Barriers in Kenthurst 2156 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Where Kenthurst sits, who covers it and what it costs.
Postcode 2156 covers Kenthurst and the streets immediately around it. At about 29.3 km north-west of the CBD it falls in the Hills District, where we have vans out daily. We cover Kenthurst on scheduled runs through the Hills District, and we will give you a firm time rather than a window.
John Benyon Rotary Park is the part of Kenthurst we attend most often.
We cover Dural, Middle Dural and Glenhaven on the same runs as Kenthurst, which helps when termite problems are moving between neighbouring properties. Bush edges keep re-supplying the problem, which is why we treat the boundary rather than only the interior.
Kenthurst jobs tend to be homes on sloping blocks with a sub-floor and bush on the boundary. Let us know which when you ring and we will plan the visit around it.
Wherever you are in 2156, you are inside the area our technicians cover.
You get a confirmed time, not a window. We plan the 2156 run the day before, and if Dural or Middle Dural is on the same round there is often an earlier slot going.
The system does not stop termites existing - it forces them into the open where an inspection will find them. That is why the annual check is part of the system rather than an optional extra.
A barrier is only as good as its weakest penetration. One untreated conduit gives a colony a clean route into the frame.
AS 3660.1 is the standard for termite management in new construction, and it is what the certifier signs against. A Kenthurst build without a compliant, certified system does not get its occupation certificate.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A physical, termite-resistant membrane laid over the prepared ground ahead of the pour, covering the slab's entire footprint.

A collar is sealed around each plumbing pipe, conduit and service passing through the slab, because those are the most common hidden entry points.

A physical barrier at the slab edge and continuing into the wall cavity, preventing concealed tunnelling up the slab's outside face.

Termiticide registered with the APVMA goes into the soil, and a reticulation pipe network can be added so later recharging needs no digging.

For sloping or elevated sites, protection covering the piers, bearers and suspended timber floor.

Detailed work against retaining walls, sandstone cuts, step-downs and the cut-and-fill sites common around Sydney.
Once the slab is poured, the areas termites use most are sealed away for good.
It costs far less now than retrofitting later, and vastly less than repairing termite damage.
If a new Class 1 home or Class 10 outbuilding has termite-susceptible primary building elements, a compliant system is required.
Pipe penetrations and slab joints can only be fully protected before concrete covers them.
No post-construction treatment reaches under the slab. An under-slab system does.
The certifier needs the installation certificate and the durable notice in hand to issue the Occupation Certificate.
Compliant, documented termite protection is something buyers, building inspectors and lenders all look for.
One call to a licensed Sydney technician gets you straight advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A termite-resistant layer (sheet, stainless mesh or graded stone particles) that termites can't chew through, laid under the slab or at the perimeter | Designed to last as long as the slab if it isn't disturbed. No chemical top-ups. | Slab-on-ground homes and owners who want a non-chemical option |
| Penetration collars | Physical collars sealed around every pipe and conduit through the slab | Long-lasting when installed correctly before the pour | Every slab. Usually combined with a perimeter system. |
| Chemical soil barrier | Soil treated with termiticide to form a zone under and around the structure | Service life depends on label and soil, with re-application possible | Budget-conscious projects and certain complex sites |
| Reticulation system | A pipe network installed ahead of paving, allowing the soil to be re-treated by pumping | Can be topped up throughout the building's life without digging up paving | Homes surrounded by paving or heavy landscaping |
| Baiting (post-construction) | In-ground monitoring stations that take out the colony | Regular station servicing is required | Existing homes, covered under termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
We work from your drawings and slab details, specify a system, and fix the price stage by stage before anything is booked.
Collars go onto every service penetration, and once the site is prepared the under-slab membrane or the chemical treatment is installed.
While the brickwork or cladding goes up, the perimeter and cavity barriers are installed, leaving no gap at the slab edge.
Where it is specified, the chemical perimeter or reticulation system is finished around the completed building before any paving or landscaping goes in.
A durable notice fixed in the meter box records the system, and the installation certificate is provided to the builder and the certifier.
At handover the owner is given maintenance advice and the recommended inspection schedule that keeps the system effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | The permanent meter-box notice recording the system, the install date, any chemical's life expectancy, the installer and inspection advice | The certifier, the owner, and owners after them |
| Installation certificate | Written confirmation of the system and products installed, the areas protected and the installer's licence | The builder, the certifier and the owner's records |
| Product information | Details of the physical system or termiticide used, including safety data sheets for chemicals | Builder and owner |
| Maintenance & inspection advice | How the barrier is kept effective, plus the inspection frequency AS 3660.2 recommends | The homeowner |
Send the architectural or slab plan, the slab type - raft, waffle pod or suspended - the site address, an approximate pour date, and engineering details for any retaining walls or step-downs.
We schedule to the plumber's set-out and the concreter's pour, confirming collar installation before the pour inspection once services are in.
Developers and volume builders work to consistent pricing with a single contact and documentation for every dwelling.
A missing durable notice or unclear installation record is a common cause of occupation certificate delay. We supply the lot together so the certifier has everything.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area & perimeter length | The bigger the footprint, the more membrane, perimeter protection and labour required |
| System type | There is a real price difference between under-slab physical, perimeter-only, chemical and reticulation systems |
| Service penetrations | Every plumbing and electrical penetration through the slab has to be collared |
| Site complexity | Retaining walls, step-downs, sandstone excavation and suspended floors all require extra detailing |
| Visits to site | Staged installation tracks the build program, with multi-dwelling sites often combined |
Send your plans for a fixed, written quote. There's no charge to quote.
Clay soils also hold moisture against the slab, which is the condition termites want. The barrier matters more on those blocks, not less.
Pre-purchase inspections ask about the system and the notice. Having both in order removes a negotiating point from the buyer's side.
Anywhere in Kenthurst is within the area we attend for pre-construction work, including sites the larger operators will not travel to.
NSW Pest Management licence 5122967, installing to the AS 3660.1 standard.
Scheduled around the builder's program, so a barrier stage does not delay the pour.
Durable notice, installation certificate and product information, all handed over.
Single dwellings, granny flats, duplexes and multi-unit projects.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. The fixed price depends on the size of the property and how far the problem has spread, and we confirm it before we start - there is no call-out fee in Kenthurst 2156. You get the AS 3660.1 certificate and the durable notice for the meter box.
We cover it on scheduled runs, so a day's notice gets you the best slot. Kenthurst sits roughly 29.3 km north-west of the CBD, inside our Hills District run, so we book a time and keep to it.
Where bushland adjoins the block, the question is not how termites got in but how often. The perimeter is what decides that.
Homes with sub-floors and roof voids backing onto reserve - we inspect all three plus the boundary.
Yes - freestanding homes, townhouses, apartments, rentals and business premises in Kenthurst 2156 are all covered, with documentation suitable for an agent or a strata manager.
It is, provided the instructions are followed. We will tell you what to keep clear of and for how long before we leave. Let us know about children, pets or fish tanks when you book.
Usually not. Most of the work is done with you in the house, and where a room does need to be clear it is for a short period we will tell you about on arrival.
Between one and two hours covers the majority of jobs. We do not book so tightly that a technician has to cut a job short.
You get the AS 3660.1 certificate and the durable notice for the meter box. Ring us if activity picks up again inside that period and we will arrange the return.
All of them. Kenthurst sits alongside Dural, Middle Dural, Glenhaven and Galston in our coverage, and they are serviced on the same schedule.
Photographs from Elite jobs across Sydney — not stock imagery.
Insured, licensed technicians and a straight quote within 30 minutes - no obligation either way.