What we need to quote
Architectural plans or a slab plan, slab type (raft, waffle pod, suspended), the site address, approximate pour date and any engineering details for retaining walls or step-downs.
Pre-Construction Termite Barriers in Leppington 2179 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Local technicians, fixed prices and a written report for every job in Leppington.
Postcode 2179 covers Leppington and the streets immediately around it. At about 39.2 km west of the CBD it falls in the South West Sydney, where we have vans out daily. We cover Leppington on scheduled runs through the South West Sydney, and we will give you a firm time rather than a window.
The Leppington jobs we attend tend to sit between Willowdale Shopping Centre and Leppington Oval.
We work under the Liverpool, Fairfield and Cumberland area here, and West Hoxton, Carnes Hill and Edmondson Park are all on the same route, which matters when termite problems are moving between adjoining properties. Estate blocks are compact with narrow side passages, so access and the perimeter are where most of the work happens.
The bulk of our Leppington work is estate houses with narrow side access and a shared fence line. Mention the detail when you call 1300 313 373 - it decides how long we need on site.
The whole of 2179 is on our regular run.
The 2179 run is set the day before and you are given an arrival time. Where West Hoxton and Carnes Hill fall on the same round, we can usually bring the visit forward.
Retro-fitting means drilling and injecting a finished slab, working around landscaping and services. It is slower, more expensive and less complete than doing it at construction on a Leppington block.
A barrier is a continuous system, so it fails at the join. On Leppington sites the usual culprits are a penetration added after our visit and a section of slab edge covered before anyone inspected it.
We photograph each penetration as it is treated, so there is a record of what was done rather than an assurance.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

Laid on the prepared ground before the pour, this termite-resistant membrane protects the complete footprint of the slab.

Each service penetrating the slab - pipe, conduit, cable - takes a sealed collar. Penetrations are where termites most often get in unseen.

Around the slab edge and up into the wall cavity, a physical barrier stops termites running hidden tunnels up the outside of the slab.

APVMA-registered termiticide applied to the soil, with the option of a reticulation pipe network so the barrier can be recharged later without digging.

On a sloping or elevated site, the bearers, piers and suspended timber floor are all protected.

Detailing for the complications Sydney blocks throw up: retaining walls, sandstone excavation, step-downs and cut-and-fill.
Once the slab is poured, the areas termites use most are sealed away for good.
The pre-construction price is far below what a retrofit costs, and nowhere near the cost of repairing damage.
New Class 1 homes and Class 10 outbuildings need a compliant termite management system where the primary building elements are susceptible.
Pipe penetrations and slab joints are only fully protectable while they are still exposed, before the concrete goes over.
There are areas no later treatment can reach - an under-slab system covers them.
Your certifier must have the installation certificate and durable notice before the Occupation Certificate can issue.
Having the termite protection documented and compliant reassures buyers, inspectors and lenders alike.
A licensed Sydney technician will talk it through and give you a fixed quote within half an hour.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | Membrane, stainless mesh or graded stone forming a layer termites cannot pass, beneath the slab or around the perimeter | Designed to last as long as the slab itself if undisturbed; no top-ups | Slab-on-ground construction and non-chemical preferences |
| Penetration collars | Physical collars sealed around all pipes and conduits penetrating the slab | Correctly installed before the pour, they last | All slabs, normally combined with a perimeter system |
| Chemical soil barrier | A treated zone created with termiticide in the soil below and around the building | The label and the soil conditions set the service life; it can be re-applied | Builds with tighter budgets, and some complex sites |
| Reticulation system | A pre-paving pipe network allowing termiticide to be pumped back into the soil | Rechargeable over the building's life without lifting any paving | Homes surrounded by paving or landscaping |
| Baiting (post-construction) | Ground stations for monitoring, then baiting to eliminate the colony | The stations must be serviced regularly | Existing homes - see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
We work from your plans and slab details, recommending a system and quoting each stage at a fixed price.
Penetration collars fitted to all services, and an under-slab membrane or chemical treatment installed once the site is prepared.
As the brickwork or cladding rises, perimeter and cavity barriers go in so the slab edge is left with no gap.
Where the design calls for it, the chemical perimeter or reticulation is completed around the finished building ahead of paving and landscaping.
A durable notice goes into the meter box to record the system, with the installation certificate to the builder and certifier.
Handover includes maintenance advice and the recommended inspection schedule for keeping the system effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent plate in the meter box recording the system, the installation date, the life expectancy of any chemical, the installer and the inspection advice | The certifier, the owner, and whoever owns it next |
| Installation certificate | A written record of the system and products installed, which areas are protected, and the installer's licence number | The builder, the certifier and the owner's file |
| Product information | Documentation of the physical system or termiticide applied, including chemical safety data sheets | Builder and owner |
| Maintenance & inspection advice | How to keep the barrier effective, and the recommended inspection frequency (AS 3660.2) | Homeowner |
Architectural plans or a slab plan, slab type (raft, waffle pod, suspended), the site address, approximate pour date and any engineering details for retaining walls or step-downs.
Timing follows the plumbing set-out and the pour. Tell us when services are complete and we confirm the collars before the pour inspection.
Consistent pricing, one point of contact and per-lot documentation for developers and volume builders.
A missing durable notice or unclear installation record is a common cause of occupation certificate delay. We supply the lot together so the certifier has everything.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area and perimeter | A bigger footprint means more membrane, more perimeter work and more hours |
| System type | Full under-slab physical systems, perimeter-only systems and chemical or reticulation options are priced differently |
| Number of penetrations | Every plumbing and electrical penetration through the slab requires a collar |
| Difficulty of the site | Retaining walls, step-downs, sandstone excavation and suspended floors add to the detailing |
| Visits to site | Staged installation tracks the build program, with multi-dwelling sites often combined |
Send your plans for a fixed, written quote. There's no charge to quote.
Estates built on cleared farmland inherit the colonies already living in that soil. A new Leppington house is not a fresh start from a termite point of view - it is a new food source on an established site.
Clay soils also hold moisture against the slab, which is the condition termites want. The barrier matters more on those blocks, not less.
An addition to a protected house is a new entry point unless it is tied into the existing system. We treat it as part of the whole, not a separate job.
We hold NSW Pest Management licence 5122967 and install to AS 3660.1.
We attend to suit the builder's program, so the pour is never held up by a barrier stage.
Durable notice, certificate of installation and product details - all supplied together.
Single dwellings and granny flats through to duplexes and multi-unit developments.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. Two things move it: how big the place is, and how far it has already spread. We work that out on the phone or on site and tell you the figure before anything starts in Leppington. You get the AS 3660.1 certificate and the durable notice for the meter box.
At roughly 39.2 km west of the city, Leppington is on a route we run regularly. We cover it on scheduled runs, so a day's notice gets you the best slot. You will be given a time, not a window.
On a newer estate the boundaries are close and the landscaping is young, so termites move between properties along fence lines with very little to stop them.
Newer estate housing with narrow side access and young landscaping, which puts the focus on the boundary and the fence line.
We do all of those. A good share of the Leppington jobs we run are tenanted or strata properties, so the written record comes as standard.
Yes, applied correctly. Products are registered for this use, placed out of reach rather than across open surfaces, and you will know what to stay off and for how long.
In most cases you can stay. Where an area does need to be left clear it is for a couple of hours at most, and we say so before we start.
For a standard Leppington home, one to two hours. We would rather tell you it will take longer up front than rush it.
You get the AS 3660.1 certificate and the durable notice for the meter box. If activity continues past the expected period, call us and we will come back.
We cover the whole of Leppington, from the streets around Willowdale Shopping Centre out to the suburb boundary and on into West Hoxton.
Photographs from Elite jobs across Sydney — not stock imagery.
Fast and fully insured, with a no-obligation quote back to you within 30 minutes.