What we need to quote
Architectural plans or a slab plan, slab type (raft, waffle pod, suspended), the site address, approximate pour date and any engineering details for retaining walls or step-downs.
Pre-Construction Termite Barriers in Marrickville 2204 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Where Marrickville sits, who covers it and what it costs.
If you are in Marrickville or anywhere else in 2204, you are in our Inner West patch, 6.7 km south-west of the CBD. Our technicians are through Marrickville most days, so same-day attendance is usually available.
A lot of our Marrickville jobs are in the streets around Annette Kellerman Aquatic Centre and Sawyer Reserve, and we are out near Marrickville station regularly enough that the technician usually knows the access before they arrive.
We work under the Inner West, Burwood, Strathfield and Canada Bay area here, and Petersham, Sydenham and Enmore are all on the same route, which matters when termite problems are moving between adjoining properties. Most of the housing here shares a wall, a roof void or a sub-floor with something else, so we check what adjoins the property rather than treating it in isolation.
The bulk of our Marrickville work is apartments and converted blocks where the kitchen backs onto a service riser. Mention the detail when you call 1300 313 373 - it decides how long we need on site.
The whole of 2204 is covered, Petersham Road Reserve included.
We confirm your slot the day before and arrive at a stated time. Petersham and Sydenham sit on the same run, so earlier appointments in 2204 come up regularly.
Tell whoever does the landscaping on your Marrickville build to keep soil, mulch and paving below the slab edge. It is the single most common way a good system is quietly defeated.
Every pipe and conduit through the slab is a path. Each one needs its own collar or sealed detail, and the ones most often missed on Marrickville builds are the wet-area penetrations - shower wastes and bath traps.
A barrier is a continuous system, so it fails at the join. On Marrickville sites the usual culprits are a penetration added after our visit and a section of slab edge covered before anyone inspected it.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A sheet membrane that termites cannot pass, laid across the prepared ground before the pour so the entire footprint is covered.

Every penetration through the slab is collared and sealed. These are the hidden entry points termites use most.

Around the slab edge and up into the wall cavity, a physical barrier stops termites running hidden tunnels up the outside of the slab.

APVMA-registered termiticide applied to the soil. Add a reticulation network and the barrier can be topped up later without digging anything up.

Protection for bearers, piers and suspended timber floors on sloping or elevated sites.

Retaining walls, sandstone excavation, step-downs and cut-and-fill - all common in Sydney, all needing their own detailing.
Once the slab is poured, the areas termites use most are sealed away for good.
Doing it now is far cheaper than retrofitting a system later, and cheaper again than repairing termite damage.
New Class 1 homes and Class 10 outbuildings need a compliant termite management system where the primary building elements are susceptible.
Full protection of pipe penetrations and slab joints is possible only before the concrete is poured over them.
An under-slab system protects areas no post-construction treatment can reach.
The installation certificate and durable notice have to reach the certifier before the Occupation Certificate is issued.
Buyers, inspectors and lenders all respond to documented, compliant termite protection.
Talk to a licensed Sydney technician today - honest advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | Sheet membrane, stainless mesh or graded stone particles form a layer termites cannot pass, under the slab or at the perimeter | Lasts as long as the slab unless disturbed, and never needs a chemical top-up | Slab-on-ground homes, and anyone wanting a non-chemical system |
| Penetration collars | A physical collar sealed around every pipe and conduit crossing the slab | Long service life when fitted properly ahead of the pour | All slabs. Usually combined with a perimeter system. |
| Chemical soil barrier | Termiticide creating a treated zone in the soil beneath and around the building | Service life is set by the product label and the soil, and it can be re-applied | Builds working to a budget, and some complex sites |
| Reticulation system | A pipe network laid before paving so termiticide can be pumped back into the soil | Rechargeable for the life of the building without digging up paths | Homes surrounded by paving or landscaping |
| Baiting (post-construction) | Monitoring stations set into the ground, baited to eliminate the colony | Regular servicing of the stations is needed | For existing homes, see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Plans and slab details to us, and you get a system recommendation plus a fixed price stage by stage.
All service penetrations are collared, and the under-slab membrane or chemical treatment goes in once the site is prepared.
Perimeter and cavity barriers installed as the walls go up, so no gap is left at the slab edge.
A specified chemical perimeter or reticulation is completed around the finished building, ahead of the paving and the landscaping.
A durable notice in the meter box documents the system; the installation certificate is issued to the builder and certifier.
The owner receives maintenance advice and a recommended inspection schedule to keep the system effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent record in the meter box: the system, the date installed, the life expectancy of any chemical, the installer, and inspection advice | The certifier, the owner and any future owner |
| Installation certificate | Confirms in writing the system and products installed, the areas protected and the installer's licence | The builder, the certifier, and the owner's records |
| Product information | Details of the physical system or termiticide used, including safety data sheets for chemicals | Builder and owner |
| Maintenance & inspection advice | Advice on maintaining the barrier and the recommended inspection interval under AS 3660.2 | Homeowner |
Architectural plans or a slab plan, slab type (raft, waffle pod, suspended), the site address, approximate pour date and any engineering details for retaining walls or step-downs.
Our scheduling follows the plumber's set-out and the concreter's pour date. Once services are in, tell us and we confirm collars before the pour inspection.
Developers and volume builders work to consistent pricing with a single contact and documentation for every dwelling.
Missing durable notices or unclear installation records are a common reason for occupation certificate delays. We supply everything together so the certifier has what they need.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Footprint and perimeter | More area means more membrane, more perimeter protection and more time on site |
| System type | There is a real price difference between under-slab physical, perimeter-only, chemical and reticulation systems |
| How many services | Each service penetrating the slab, plumbing or electrical, needs a collar |
| Site complexity | Retaining walls, step-downs, sandstone excavation and suspended floors all require extra detailing |
| Number of visits | The staged install follows your build program, and multi-dwelling sites can be combined |
Send your plans for a fixed, written quote. There's no charge to quote.
It is one of the few construction details that still matters commercially fifteen years later.
Our barrier work takes in Marrickville and across toward Petersham, on single builds and multi-lot developments alike.
Much of western and south-western Sydney sits on reactive clay that moves with moisture. Around Marrickville that movement can open hairline paths underground where nothing is visible from the surface.
NSW Pest Management licence 5122967, installing to the AS 3660.1 standard.
We fit the builder's program, so no barrier stage ever delays a pour.
Everything the certifier wants: durable notice, installation certificate, product details.
One house, a granny flat, a duplex, or a full multi-unit project.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. Two things move it: how big the place is, and how far it has already spread. We work that out on the phone or on site and tell you the figure before anything starts in Marrickville. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Our Inner West technicians cover Marrickville daily, and you get a confirmed arrival time when you book.
Older inner suburbs combine shared structure with ageing drainage, and termites exploit both. Rear courtyards that have been paved over make it worse by trapping damp against the walls.
Joined housing with ageing drainage. That combination decides where product goes far more than the floor plan does.
We do. A lot of our Marrickville work is rentals and strata, so the report, the products used and the areas treated are all recorded in writing for whoever needs them.
Yes, applied correctly. Products are registered for this use, placed out of reach rather than across open surfaces, and you will know what to stay off and for how long.
Usually not. Most pre-construction termite barriers work is done with you there, and anything that needs the room vacated is for a short period we will tell you about beforehand.
An hour to two hours covers most jobs. The size of the building and the extent of the problem are what change it.
You get the AS 3660.1 certificate and the durable notice for the meter box. So if they turn up again within the warranty, ring us and we will attend.
We do. Marrickville and Petersham, Sydenham, Enmore and Dulwich Hill are all on the same route, which helps if you own more than one property in the area.
Photographs from Elite jobs across Sydney — not stock imagery.
Insured, licensed technicians and a straight quote within 30 minutes - no obligation either way.