What we need to quote
We need the architectural or slab plan, the slab type (raft, waffle pod, suspended), the address, a rough pour date, and engineering details for retaining walls or step-downs.
Pre-Construction Termite Barriers in Peakhurst Heights 2210 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
What we cover in Peakhurst Heights, and how quickly we can get there.
Our St George & Bayside technicians cover Peakhurst Heights and the rest of 2210 as a matter of course - it is only about 19.2 km south-west of the city. We run Peakhurst Heights on a regular route, and same-day attendance is usually available.
A lot of our Peakhurst Heights jobs are in the streets around Beauty Point Reserve and Illawong Village Shopping Centre, and we are out near Hurstville Golf Course regularly enough that the technician usually knows the access before they arrive.
This is the Georges River and Bayside area, and our runs here also take in Lugarno, Peakhurst and Oatley. Salt air and sandy ground keep sub-floors damp here, and damp is what sustains a population.
Most Peakhurst Heights bookings come in as ground-floor units with a damp sub-floor, and houses where the garage sits below the living level. Say which one applies when you call 1300 313 373 and the technician will have the right products on the van.
Every part of 2210 is covered as standard.
When you book, we confirm the 2210 run the day before and give you an arrival time rather than a window. If we are already out at Lugarno or Peakhurst that morning, we will usually offer you the earlier slot.
The value is detectability. A Peakhurst Heights house with a barrier and no inspections has half a system.
The standard covers the system, the installation and the documentation. All three have to be right - a correctly installed system with missing paperwork still holds up a Peakhurst Heights handover.
A barrier is a continuous system, so it fails at the join. On Peakhurst Heights sites the usual culprits are a penetration added after our visit and a section of slab edge covered before anyone inspected it.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A termite-resistant physical membrane laid across the prepared ground before the pour, protecting the whole footprint of the slab.

Each pipe, conduit and service crossing the slab is sealed with a collar - penetrations being the most common concealed entry.

A barrier around the slab edge and into the wall cavity prevents termites tunnelling unseen up the slab's outer face.

An APVMA-registered termiticide into the soil, optionally with a reticulation pipe network so it can be recharged later without excavation.

For sloping or elevated sites, protection covering the piers, bearers and suspended timber floor.

Retaining walls, sandstone excavation, step-downs and cut-and-fill - all common in Sydney, all needing their own detailing.
Once the slab is poured, the areas termites use most are sealed away for good.
Compared with a retrofit - or with repairing damage - a pre-construction barrier is a small cost.
Under the NCC, Class 1 homes and Class 10 outbuildings with termite-susceptible primary building elements require a compliant termite management system.
Pipe penetrations and slab joints can be fully sealed only while the concrete has yet to cover them.
Under-slab protection reaches areas that post-construction treatment simply cannot.
Your certifier must have the installation certificate and durable notice before the Occupation Certificate can issue.
Having the termite protection documented and compliant reassures buyers, inspectors and lenders alike.
One call to a licensed Sydney technician gets you straight advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A termite-resistant layer (sheet, stainless mesh or graded stone particles) that termites can't chew through, laid under the slab or at the perimeter | Designed to last as long as the slab if it isn't disturbed. No chemical top-ups. | Slab-on-ground homes and owners who want a non-chemical option |
| Penetration collars | Collars physically sealed to every pipe and conduit through the slab | Long-lived where installation before the pour is done properly | Every slab, and typically with a perimeter system as well |
| Chemical soil barrier | A treated zone of termiticide in the soil under and around the building | Service life depends on the product label and soil conditions. It can be re-applied. | Budget-conscious builds and some complex sites |
| Reticulation system | A network of pipes installed before paving so termiticide can be re-injected into the soil | Rechargeable throughout the building's life, with no need to dig up paths | Homes with paving or landscaping all around them |
| Baiting (post-construction) | Stations in the ground that monitor activity and eliminate the colony | They need servicing on a regular basis | Existing buildings - see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Give us the plans and slab details; back comes a recommended system and a fixed price for every stage.
Collars go onto every service penetration, and once the site is prepared the under-slab membrane or chemical treatment is installed.
Perimeter and cavity barriers are installed with the brickwork or cladding, closing any gap at the slab edge.
A chemical perimeter or reticulation system, where specified, is completed around the building before any paving or landscaping.
A durable notice goes into the meter box recording the system; builder and certifier each get the installation certificate.
The owner receives advice on maintenance plus a recommended inspection schedule to maintain the system.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent record in the meter box: the system, the date installed, the life expectancy of any chemical, the installer, and inspection advice | The certifier, the owner and any future owner |
| Installation certificate | Written confirmation of what system and products went in, the areas protected, and the installer's licence | Builder and certifier, plus the owner's records |
| Product information | Details of the physical system or termiticide used, including safety data sheets for chemicals | Builder and owner |
| Maintenance & inspection advice | What keeps the barrier working, and the inspection frequency recommended by AS 3660.2 | The homeowner |
We need the architectural or slab plan, the slab type (raft, waffle pod, suspended), the address, a rough pour date, and engineering details for retaining walls or step-downs.
Scheduling works around the plumber's set-out and the concreter's pour. Let us know when services are in and we confirm collar installation ahead of the pour inspection.
Consistent pricing, one point of contact and per-lot documentation for developers and volume builders.
A missing durable notice or unclear installation record is a common cause of occupation certificate delay. We supply the lot together so the certifier has everything.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Size of slab and perimeter | Larger footprints take more membrane, more perimeter protection and more labour |
| Which system | A full under-slab physical system, a perimeter-only system, and chemical or reticulation options all price differently |
| Penetration count | Every plumbing and electrical service through the slab needs a collar fitted |
| Complexity of the site | Retaining walls, step-downs, sandstone cuts and suspended floors each add detailing |
| Number of visits | The staged install follows your build program, and multi-dwelling sites can be combined |
Send your plans for a fixed, written quote. There's no charge to quote.
A documented, serviced termite management system is something a Peakhurst Heights buyer's pest inspector will note favourably. The absence of paperwork is something they will note the other way.
Reactive soil is the argument for a system that tolerates movement rather than a rigid one. We choose based on the soil report for the Peakhurst Heights site, not on a default.
We install across 2210 and the surrounding St George & Bayside - new builds, knock-down rebuilds, extensions and owner-builder projects around Beauty Point Reserve and beyond.
NSW licence 5122967, and installation work done to AS 3660.1.
The builder's program sets our timing, which means a barrier stage never holds up a pour.
You get the durable notice, the installation certificate and the product details.
Single dwellings, granny flats, duplexes and multi-unit developments.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. What changes the figure is the size of the building, how many areas are affected and the access. You get that number up front for Peakhurst Heights 2210, with no call-out fee. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Our St George & Bayside technicians cover Peakhurst Heights daily, and you get a confirmed arrival time when you book.
Being near the water means humidity that never really drops. Sub-floors stay moist, lower levels stay cool and damp, and termites do well in both.
A mix of walk-up blocks and free-standing homes, where the lower level and the sub-floor are what we concentrate on.
Yes. We work in houses, units, strata blocks, rentals and commercial premises across Peakhurst Heights 2210, and we provide the written report agents and strata managers ask for.
It is, applied properly. We put product into cracks, voids and stations rather than across open surfaces, and we will tell you what to stay off and for how long before we leave.
Usually not. Most of the work is done with you in the house, and where a room does need to be clear it is for a short period we will tell you about on arrival.
An hour to two hours covers most jobs. The size of the building and the extent of the problem are what change it.
You get the AS 3660.1 certificate and the durable notice for the meter box. If it is not holding, call us - that is exactly what the warranty is for.
We cover the whole of Peakhurst Heights, from the streets around Beauty Point Reserve out to the suburb boundary and on into Lugarno.
Photographs from Elite jobs across Sydney — not stock imagery.
Fast and fully insured, with a no-obligation quote back to you within 30 minutes.