What we need to quote
Architectural or slab plans, slab type - raft, waffle pod or suspended - site address, approximate pour date, plus engineering details on any retaining walls or step-downs.
Pre-Construction Termite Barriers in Strathfield South 2136 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Where Strathfield South sits, who covers it and what it costs.
If you are in Strathfield South or anywhere else in 2136, you are in our Inner West patch, 12 km west of the CBD. We run Strathfield South on a regular route, and same-day attendance is usually available.
A lot of our Strathfield South jobs are in the streets around Frog Conservation Area and Strathfield Golf Course (private), and we are out near Westfield Burwood regularly enough that the technician usually knows the access before they arrive.
Under Inner West, Burwood, Strathfield and Canada Bay, we cover Strathfield South and Enfield, Belfield and Strathfield alike. The building stock is close-packed, so we look at what the property adjoins before deciding where product goes.
Strathfield South jobs tend to be older semis with a paved rear courtyard and a sub-floor that no longer dries out. Let us know which when you ring and we will plan the visit around it.
The rest of 2136 is covered too, including the pockets around Chullora Marketplace and Edwards Park.
You get a confirmed time, not a window. We plan the 2136 run the day before, and if Enfield or Belfield is on the same round there is often an earlier slot going.
A barrier is only as good as its weakest penetration. One untreated conduit gives a colony a clean route into the frame.
The exposed slab edge is a designed part of the system: it is where an inspector can see workings before they reach the frame. Most of the failed inspection zones we find on Strathfield South homes were buried by a landscaper who was never told.
People expect a barrier to be a wall. It is a managed zone: termites either cannot cross it or must build visible workings to do so.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

The whole slab footprint is protected by a termite-resistant membrane laid onto the prepared ground before concrete goes down.

Each pipe, conduit and service crossing the slab is sealed with a collar - penetrations being the most common concealed entry.

A physical barrier around the slab edge and into the wall cavity, which stops termites building concealed tunnels up the outside of the slab.

A soil-applied APVMA-registered termiticide, with the option of reticulation pipework allowing recharge later without excavation.

Protection for the piers, bearers and suspended timber flooring on elevated or sloping sites.

Detailed work against retaining walls, sandstone cuts, step-downs and the cut-and-fill sites common around Sydney.
Once the slab is poured, the areas termites use most are sealed away for good.
A pre-construction barrier costs far less than a retrofitted system or repairs to termite damage later.
If a new Class 1 home or Class 10 outbuilding has termite-susceptible primary building elements, a compliant system is required.
Pipe penetrations and slab joints are only fully protectable while they are still exposed, before the concrete goes over.
No post-construction treatment reaches under the slab. An under-slab system does.
The Occupation Certificate will not be issued until the certifier has the installation certificate and durable notice.
Compliant, documented termite protection is something buyers, building inspectors and lenders all look for.
Get a licensed Sydney technician on the phone today - honest advice, fixed quote in 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | Sheet membrane, stainless mesh or graded stone particles form a layer termites cannot pass, under the slab or at the perimeter | Lasts as long as the slab unless disturbed, and never needs a chemical top-up | Slab-on-ground homes, and anyone wanting a non-chemical system |
| Penetration collars | Collars sealed physically to every pipe and conduit through the slab | Durable when fitted correctly ahead of the pour | All slabs, normally combined with a perimeter system |
| Chemical soil barrier | Termiticide creating a treated zone in the soil beneath and around the building | Service life is set by the product label and the soil, and it can be re-applied | Builds working to a budget, and some complex sites |
| Reticulation system | A pre-paving pipe network allowing termiticide to be pumped back into the soil | Rechargeable over the building's life without lifting any paving | Homes surrounded by paving or landscaping |
| Baiting (post-construction) | In-ground monitoring stations that eliminate the colony | Stations need regular servicing | Existing homes, see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
We work from your drawings and slab details, specify a system, and fix the price stage by stage before anything is booked.
Every service through the slab is collared first, then the under-slab membrane or chemical treatment goes down on the prepared site.
As the walls go up the perimeter and cavity barriers are installed, closing the slab edge as the work progresses.
Where it is specified, the chemical perimeter or reticulation system is finished around the completed building before any paving or landscaping goes in.
The meter box carries a durable notice recording the system, and the builder and certifier each receive the installation certificate.
The owner is given maintenance guidance and an inspection schedule that keeps the system effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent notice in the meter box recording the system, installation date, the life expectancy of any chemical used, the installer and inspection advice | The certifier, the owner and future owners |
| Installation certificate | A written statement of system, products, protected areas and installer licence | Builder, certifier and the owner's records |
| Product information | Details of the physical system or the termiticide used, with safety data sheets for chemicals | The builder and the owner |
| Maintenance & inspection advice | What keeps the barrier working, and the inspection frequency recommended by AS 3660.2 | The homeowner |
Architectural or slab plans, slab type - raft, waffle pod or suspended - site address, approximate pour date, plus engineering details on any retaining walls or step-downs.
Our scheduling follows the plumber's set-out and the concreter's pour date. Once services are in, tell us and we confirm collars before the pour inspection.
For developers and volume builders: consistent pricing, one point of contact, and documentation issued for every lot or dwelling.
Missing durable notices or unclear installation records are a common reason for occupation certificate delays. We supply everything together so the certifier has what they need.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area & perimeter length | Larger footprints need more membrane, more perimeter protection and more labour |
| The system specified | Under-slab physical systems, perimeter-only systems and chemical or reticulation options carry different prices |
| Service penetrations | Every plumbing and electrical penetration through the slab has to be collared |
| How complex the site is | Retaining walls, step-downs, sandstone excavation and suspended floors all add detailing |
| How many visits | Installations are staged to the build program, and multi-dwelling sites can be combined |
Send your plans for a fixed, written quote. There's no charge to quote.
Reactive soil is the argument for a system that tolerates movement rather than a rigid one. We choose based on the soil report for the Strathfield South site, not on a default.
The failures we are called to inspect are rarely the product. They are a collar missed on a late-added pipe, a perimeter left short at a step-down, or a membrane torn by a trade after we left and never reported.
It is one of the few construction details that still matters commercially fifteen years later.
We hold NSW Pest Management licence 5122967 and install to AS 3660.1.
We work around the builder's program so a barrier stage never delays the pour.
Durable notice, certificate of installation and product details - all supplied together.
Single dwellings and granny flats through to duplexes and multi-unit developments.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. Two things move it: how big the place is, and how far it has already spread. We work that out on the phone or on site and tell you the figure before anything starts in Strathfield South. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Our Inner West technicians cover Strathfield South daily, and you get a confirmed arrival time when you book.
Joined housing is the reason. Where walls, roof voids and sub-floors are continuous between properties, termites are a street-level problem rather than a house-level one.
Mostly terrace and semi. We look at the party wall, the sub-floor and the roof space, because those are the routes between houses.
Yes. Houses, townhouses, units, strata common property, rentals and commercial sites in Strathfield South 2136 are all part of what we do, and the paperwork is the kind agents accept.
It is, applied properly. We put product into cracks, voids and stations rather than across open surfaces, and we will tell you what to stay off and for how long before we leave.
Usually not. Most pre-construction termite barriers work is done with you there, and anything that needs the room vacated is for a short period we will tell you about beforehand.
Most pre-construction termite barriers jobs in a Strathfield South home take between one and two hours on site, depending on the size of the property and how much of it is affected.
You get the AS 3660.1 certificate and the durable notice for the meter box. A return visit within the warranty period costs you nothing.
We cover the whole of Strathfield South, from the streets around Westfield Burwood out to the suburb boundary and on into Enfield.
Photographs from Elite jobs across Sydney — not stock imagery.
Fast, friendly, fully insured technicians. No-obligation quote within 30 minutes.