What we need to quote
Plans or slab plan, slab type (raft, waffle pod, suspended), site address, approximate pour date, and engineering details for retaining walls and step-downs.
Pre-Construction Termite Barriers in West Pennant Hills 2125 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Local technicians, fixed prices and a written report for every job in West Pennant Hills.
Our Ryde & the Northern District technicians cover West Pennant Hills and the rest of 2125 as a matter of course - it is only about 21.5 km north-west of the city. We run West Pennant Hills on a regular route, and same-day attendance is usually available.
Our West Pennant Hills work takes in the streets by Bidjigal Reserve and Coonara Shopping Village, through to North Rocks Shopping Centre at the other end.
We cover Cherrybrook, North Rocks and Beecroft on the same runs as West Pennant Hills, which helps when termite problems are moving between neighbouring properties. Most of the housing here shares a wall, a roof void or a sub-floor with something else, so we check what adjoins the property rather than treating it in isolation.
Around West Pennant Hills the pattern is fairly consistent: terraces and semis where the problem has come through a shared wall. Tell us which it is on the phone and we will come prepared for it.
Cherrybrook station and Koala Park are on the same round, which means every part of 2125 is within our area.
When you book, we confirm the 2125 run the day before and give you an arrival time rather than a window. If we are already out at Cherrybrook or North Rocks that morning, we will usually offer you the earlier slot.
A barrier does not stop being compliant when a garden bed goes in over it, but it does stop being inspectable - which amounts to the same thing a few years later.
A barrier is a continuous system, so it fails at the join. On West Pennant Hills sites the usual culprits are a penetration added after our visit and a section of slab edge covered before anyone inspected it.
It is not guidance. It is the benchmark a private certifier assesses against, which is why we install to the approved plan rather than to habit.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A physical, termite-resistant membrane laid over the prepared ground ahead of the pour, covering the slab's entire footprint.

Collars are sealed to every plumbing and electrical penetration through the slab, the most frequent concealed entry route there is.

A physical barrier at the slab edge and continuing into the wall cavity, preventing concealed tunnelling up the slab's outside face.

APVMA-registered termiticide into the soil, with optional reticulation pipework for recharging the barrier later without excavation.

Bearers, piers and suspended timber floors protected on sloping and elevated sites.

Retaining walls, sandstone cuts, step-downs and cut-and-fill sites are detailed individually - all of them common here.
Once the slab is poured, the areas termites use most are sealed away for good.
A barrier installed during the build costs far less than one retrofitted afterwards or any damage repair.
The NCC requires a compliant system on Class 1 dwellings and Class 10 outbuildings where primary building elements are termite-susceptible.
Pipe penetrations and slab joints can be fully sealed only while the concrete has yet to cover them.
An under-slab system protects areas no post-construction treatment can reach.
Your certifier needs the installation certificate and durable notice before issuing the Occupation Certificate.
Documented compliance on termite protection reassures the buyer, their inspector and the lender.
Get a licensed Sydney technician on the phone today - honest advice, fixed quote in 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A physical layer - membrane, stainless mesh or graded stone - that termites cannot get through, beneath the slab or at its edge | Intended to last the life of the slab if not disturbed, and requires no chemical top-up | Slab-on-ground builds, and owners who want to avoid chemicals |
| Penetration collars | Physical collars sealed to each pipe and conduit through the slab | They last if the installation before the pour was done correctly | Every slab, generally alongside a perimeter system |
| Chemical soil barrier | A treated zone of termiticide in the soil under and around the building | Service life depends on the product label and soil conditions. It can be re-applied. | Budget-conscious builds and some complex sites |
| Reticulation system | Pipework laid before the paving so termiticide can be pumped back into the soil later | Rechargeable for the life of the building, with no need to lift paths | Houses ringed by paving or landscaping |
| Baiting (post-construction) | In-ground monitoring stations that take out the colony | Regular station servicing is required | Existing homes, covered under termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Plans and slab details to us, and you get a system recommendation plus a fixed price stage by stage.
Collars go onto every service penetration, and once the site is prepared the under-slab membrane or chemical treatment is installed.
While the brickwork or cladding goes up, the perimeter and cavity barriers are installed, leaving no gap at the slab edge.
A specified chemical perimeter or reticulation is completed around the finished building, ahead of the paving and the landscaping.
The system is documented on a durable notice in the meter box, and the installation certificate goes to builder and certifier.
The owner receives maintenance advice and a recommended inspection schedule to keep the system effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent plate in the meter box recording the system, the installation date, the life expectancy of any chemical, the installer and the inspection advice | The certifier, the owner, and whoever owns it next |
| Installation certificate | A written statement of system, products, protected areas and installer licence | Builder, certifier and the owner's records |
| Product information | Details of the physical system or termiticide used, including safety data sheets for chemicals | Builder and owner |
| Maintenance & inspection advice | How to keep the barrier effective, and the recommended inspection frequency (AS 3660.2) | Homeowner |
Plans or slab plan, slab type (raft, waffle pod, suspended), site address, approximate pour date, and engineering details for retaining walls and step-downs.
We schedule to the plumber's set-out and the concreter's pour, confirming collar installation before the pour inspection once services are in.
Developers and volume builders work to consistent pricing with a single contact and documentation for every dwelling.
Occupation certificate delays usually trace to a missing durable notice or poor records. We give the certifier the full set in one go.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area & perimeter length | Larger footprints need more membrane, more perimeter protection and more labour |
| Which system | A full under-slab physical system, a perimeter-only system, and chemical or reticulation options all price differently |
| Number of penetrations | A collar is needed for each plumbing and electrical penetration through the slab |
| Site conditions | Detailing increases with retaining walls, step-downs, sandstone excavation and suspended floors |
| How many visits | Installations are staged to the build program, and multi-dwelling sites can be combined |
Send your plans for a fixed, written quote. There's no charge to quote.
Attached garages, pergolas, alfresco slabs and later additions all need to be in the system. On West Pennant Hills builds the alfresco slab poured separately is the one most often left out.
Anywhere in West Pennant Hills is within the area we attend for pre-construction work, including sites the larger operators will not travel to.
Estates built on cleared farmland inherit the colonies already living in that soil. A new West Pennant Hills house is not a fresh start from a termite point of view - it is a new food source on an established site.
Licensed in NSW under 5122967, with all installations carried out to AS 3660.1.
We attend to suit the builder's program, so the pour is never held up by a barrier stage.
We supply the durable notice, the installation certificate and the product details.
One house, a granny flat, a duplex, or a full multi-unit project.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. Two things move it: how big the place is, and how far it has already spread. We work that out on the phone or on site and tell you the figure before anything starts in West Pennant Hills. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Our Ryde & the Northern District technicians cover West Pennant Hills daily, and you get a confirmed arrival time when you book.
Joined housing is the reason. Where walls, roof voids and sub-floors are continuous between properties, termites are a street-level problem rather than a house-level one.
Terraces and semis, often with a paved rear courtyard that traps damp against the wall - both of which shape the job.
We do. A lot of our West Pennant Hills work is rentals and strata, so the report, the products used and the areas treated are all recorded in writing for whoever needs them.
It is, applied properly. We put product into cracks, voids and stations rather than across open surfaces, and we will tell you what to stay off and for how long before we leave.
In the great majority of jobs, no. If one area needs to be left for an hour or two we say so before we start rather than after.
For a standard West Pennant Hills home, one to two hours. We would rather tell you it will take longer up front than rush it.
You get the AS 3660.1 certificate and the durable notice for the meter box. Call us if activity picks up again and we will arrange the return visit.
We do. West Pennant Hills and Cherrybrook, North Rocks, Beecroft and Baulkham Hills are all on the same route, which helps if you own more than one property in the area.
Photographs from Elite jobs across Sydney — not stock imagery.
Fully insured technicians who turn up when they say they will. Quote within 30 minutes, no obligation.