What we need to quote
Plans or slab plan, slab type (raft, waffle pod, suspended), site address, approximate pour date, and engineering details for retaining walls and step-downs.
Pre-Construction Termite Barriers in Berowra 2081 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Where Berowra sits, who covers it and what it costs.
Our Upper North Shore technicians cover Berowra and the rest of 2081 as a matter of course - it is only about 27.4 km north of the city. We cover Berowra on scheduled runs through the Upper North Shore, and we will give you a firm time rather than a window.
The Berowra addresses we attend cluster around Wideview Road Reserve and Berowra Village Shopping Centre. Berowra station is another part of the suburb we are called to often.
Berowra is in the Ku-ring-gai and Hornsby area, and we cover Berowra Heights, Mount Kuring-gai and Cottage Point on the same runs - handy if you own more than one property or your termite problem has come from next door. Backing onto bush means re-entry is the issue, so proofing and the perimeter do the real work here.
Most Berowra bookings come in as homes on sloping blocks with a sub-floor and bush on the boundary. Say which one applies when you call 1300 313 373 and the technician will have the right products on the van.
Yallambee Road Park Playground and the remainder of 2081 are on the same run.
When you book, we confirm the 2081 run the day before and give you an arrival time rather than a window. If we are already out at Berowra Heights or Mount Kuring-gai that morning, we will usually offer you the earlier slot.
If a system is going to fail it fails at a detail, not across the whole footprint. That is why we photograph each penetration and each stage as it is completed.
Most Berowra builds are waffle pod or raft, and the two are detailed differently at the edge. Tell us which it is when you send the plans and the quote will be right first time.
It is not guidance. It is the benchmark a private certifier assesses against, which is why we install to the approved plan rather than to habit.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

Laid on the prepared ground before the pour, this termite-resistant membrane protects the complete footprint of the slab.

Each pipe, conduit and service crossing the slab is sealed with a collar - penetrations being the most common concealed entry.

A physical barrier around the slab edge and into the wall cavity, which stops termites building concealed tunnels up the outside of the slab.

The soil is treated with an APVMA-registered termiticide, and a reticulation network can be laid so recharging never means digging.

On a sloping or elevated site, the bearers, piers and suspended timber floor are all protected.

Specific detailing where there are retaining walls, sandstone excavation, step-downs or cut-and-fill, as is common across Sydney.
Once the slab is poured, the areas termites use most are sealed away for good.
Compared with a retrofit - or with repairing damage - a pre-construction barrier is a small cost.
A compliant termite management system is required for new Class 1 homes and Class 10 outbuildings with termite-susceptible primary building elements.
Pipe penetrations and slab joints can be fully sealed only while the concrete has yet to cover them.
Areas no post-construction treatment can ever reach are covered by an under-slab system.
Your certifier needs the installation certificate and durable notice before issuing the Occupation Certificate.
Compliant, documented termite protection is something buyers, building inspectors and lenders all look for.
Speak to a licensed Sydney technician now. Straight advice, and a fixed quote inside 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A layer termites cannot chew - sheet, stainless mesh or graded stone - laid beneath the slab or at the perimeter | Built to last the life of the slab provided it is not disturbed, with no chemical recharging | Slab-on-ground builds, and owners who would rather avoid chemicals |
| Penetration collars | Physical collars sealed around all pipes and conduits penetrating the slab | Correctly installed before the pour, they last | All slabs, normally combined with a perimeter system |
| Chemical soil barrier | Termiticide applied to create a treated soil zone under and around the building | Its life comes down to the product label and the soil, and re-application is available | Budget builds and a number of complex sites |
| Reticulation system | Pipework installed before paving so the soil can be re-treated by pumping | Can be topped up for the life of the building with no excavation of paths | Houses surrounded by paving or landscaped areas |
| Baiting (post-construction) | In-ground monitoring stations that eliminate the colony | Stations need regular servicing | Existing homes, see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
We work from your drawings and slab details, specify a system, and fix the price stage by stage before anything is booked.
Every service gets its collar, then the under-slab membrane or chemical treatment is installed on the prepared site.
The perimeter and cavity barriers are fitted as brickwork or cladding progresses, so there is never a gap at the slab edge.
Where the design calls for it, the chemical perimeter or reticulation is completed around the finished building ahead of paving and landscaping.
A durable notice goes into the meter box to record the system, with the installation certificate to the builder and certifier.
The owner receives advice on maintenance plus a recommended inspection schedule to maintain the system.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent meter box notice listing the system, installation date, life expectancy of any chemical used, the installer and inspection advice | The certifier, the owner and future owners |
| Installation certificate | Confirms in writing the system and products installed, the areas protected and the installer's licence | The builder, the certifier, and the owner's records |
| Product information | Information on the physical system or termiticide applied, including chemical safety data sheets | The builder and the owner |
| Maintenance & inspection advice | Guidance on keeping the barrier effective, with the AS 3660.2 recommended inspection frequency | Homeowner |
Plans or slab plan, slab type (raft, waffle pod, suspended), site address, approximate pour date, and engineering details for retaining walls and step-downs.
Timing follows the plumbing set-out and the pour. Tell us when services are complete and we confirm the collars before the pour inspection.
Consistent pricing, one point of contact and per-lot documentation for developers and volume builders.
The common cause of occupation certificate delay is a missing durable notice or unclear records - so we supply everything together.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area & perimeter length | Larger footprints need more membrane, more perimeter protection and more labour |
| Which system | A full under-slab physical system, a perimeter-only system, and chemical or reticulation options all price differently |
| Service penetrations | Every plumbing and electrical penetration through the slab has to be collared |
| How complex the site is | Retaining walls, step-downs, sandstone excavation and suspended floors all add detailing |
| Site visits required | Staging follows the build program; multi-dwelling sites may be combined into fewer visits |
Send your plans for a fixed, written quote. There's no charge to quote.
Estates built on cleared farmland inherit the colonies already living in that soil. A new Berowra house is not a fresh start from a termite point of view - it is a new food source on an established site.
Reactive soil is the argument for a system that tolerates movement rather than a rigid one. We choose based on the soil report for the Berowra site, not on a default.
An addition to a protected house is a new entry point unless it is tied into the existing system. We treat it as part of the whole, not a separate job.
NSW Pest Management licence 5122967, with installations to AS 3660.1.
We attend to suit the builder's program, so the pour is never held up by a barrier stage.
Durable notice, installation certificate and product details, all supplied.
Single dwellings, granny flats, duplexes and multi-unit projects.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. We quote on the property rather than the postcode, so a unit in Berowra and a large house are priced differently. The figure is fixed before any work starts. You get the AS 3660.1 certificate and the durable notice for the meter box.
We cover it on scheduled runs, so a day's notice gets you the best slot. We are about 27.4 km north of the city here, and Berowra is covered by the Upper North Shore team.
Undisturbed ground, leaf litter and fallen timber right to the boundary mean termites are always established next to the house. Re-entry, not eradication, is what we are managing here.
Houses on larger, often sloping blocks with bush on at least one boundary, so the perimeter and the fence line are central to the job.
We do all of those. A good share of the Berowra jobs we run are tenanted or strata properties, so the written record comes as standard.
Yes, with the usual care. Everything is APVMA-registered and used to label, and we will work around pets, aquariums and anyone in the house with a respiratory condition if you tell us when you book.
Most of the time you can carry on as normal. If a particular area needs to be empty we will flag it when we arrive and it is rarely more than a couple of hours.
For a standard Berowra home, one to two hours. We would rather tell you it will take longer up front than rush it.
You get the AS 3660.1 certificate and the durable notice for the meter box. A return visit within the warranty period costs you nothing.
Yes. As well as Berowra we cover Berowra Heights, Mount Kuring-gai, Cottage Point and Mount Colah on the same runs, so a job that crosses a boundary can be handled in one visit.
Photographs from Elite jobs across Sydney — not stock imagery.
Fast, friendly, fully insured technicians. No-obligation quote within 30 minutes.