What we need to quote
We need the architectural or slab plan, the slab type (raft, waffle pod, suspended), the address, a rough pour date, and engineering details for retaining walls or step-downs.
Pre-Construction Termite Barriers in Connells Point 2221 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Where Connells Point sits, who covers it and what it costs.
Postcode 2221 covers Connells Point and the streets immediately around it. At about 16.2 km south-west of the CBD it falls in the St George & Bayside, where we have vans out daily. We run Connells Point on a regular route, and same-day attendance is usually available.
Our Connells Point work takes in the streets by Westfield Hurstville and Duggan Park, through to Young Place Reserve at the other end.
The suburb sits in the Georges River and Bayside area. South Hurstville, Hurstville Grove and Blakehurst are all covered on the same day, so a problem that has spread across a boundary can be handled in one visit. Salt air and sandy ground keep sub-floors damp here, and damp is what sustains a population.
What we see in Connells Point is apartments where the problem is really in the building rather than the flat. Describing it accurately when you book saves a second visit.
The whole of 2221 is on our regular run.
When you book, we confirm the 2221 run the day before and give you an arrival time rather than a window. If we are already out at South Hurstville or Hurstville Grove that morning, we will usually offer you the earlier slot.
Tell whoever does the landscaping on your Connells Point build to keep soil, mulch and paving below the slab edge. It is the single most common way a good system is quietly defeated.
Most Connells Point builds are waffle pod or raft, and the two are detailed differently at the edge. Tell us which it is when you send the plans and the quote will be right first time.
A compliant barrier does not mean termites can never reach the building. It means they cannot reach it concealed - they have to build workings where an inspection will find them. That is why the annual inspection is part of the system, not an upsell.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A physical, termite-resistant membrane laid over the prepared ground ahead of the pour, covering the slab's entire footprint.

Every pipe, conduit and service through the slab gets a collar sealed to it - these penetrations are the commonest concealed way in.

A physical barrier at the slab edge and continuing into the wall cavity, preventing concealed tunnelling up the slab's outside face.

APVMA-registered termiticide into the soil, with optional reticulation pipework for recharging the barrier later without excavation.

Piers, bearers and suspended timber floors protected, which matters on sloping and elevated blocks.

Sydney sites bring retaining walls, sandstone excavation, step-downs and cut-and-fill, each of which needs specific detailing.
Once the slab is poured, the areas termites use most are sealed away for good.
It costs far less now than retrofitting later, and vastly less than repairing termite damage.
Under the NCC, Class 1 homes and Class 10 outbuildings with termite-susceptible primary building elements require a compliant termite management system.
The only time pipe penetrations and slab joints can be properly protected is before the concrete covers them.
An under-slab system covers ground that nothing applied after construction can get to.
Your certifier must have the installation certificate and durable notice before the Occupation Certificate can issue.
Compliant, documented termite protection is something buyers, building inspectors and lenders all look for.
One call to a licensed Sydney technician gets you straight advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | Sheet, stainless mesh or graded stone creating a layer termites cannot chew through, under the slab or at the perimeter | As durable as the slab itself when left undisturbed, with no top-ups needed | Slab-on-ground homes and non-chemical preferences |
| Penetration collars | Each pipe and conduit through the slab is sealed with a physical collar | Long-lasting, assuming correct installation before the pour | Every slab, usually in combination with a perimeter system |
| Chemical soil barrier | Treated soil - termiticide applied beneath and around the building | Longevity depends on label and soil conditions, and it can be renewed | Cost-conscious builds, and some complex sites |
| Reticulation system | Pipes laid in before the paving goes down, so termiticide can be pumped back into the soil | Recharging is possible for the building's life without disturbing paths | Properties ringed by paving or landscaping |
| Baiting (post-construction) | In-ground stations that monitor and then eliminate the colony | The stations require servicing on a regular schedule | Existing homes - see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
We work from your drawings and slab details, specify a system, and fix the price stage by stage before anything is booked.
Every service through the slab is collared first, then the under-slab membrane or chemical treatment goes down on the prepared site.
Perimeter and cavity barriers are installed with the brickwork or cladding, closing any gap at the slab edge.
A specified chemical perimeter or reticulation system is finished around the building prior to paving and landscaping.
A durable notice fixed in the meter box records the system, and the installation certificate is provided to the builder and the certifier.
The owner receives the maintenance guidance and an inspection schedule, which is what keeps the system doing its job.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent record in the meter box: the system, the date installed, the life expectancy of any chemical, the installer, and inspection advice | The certifier, the owner and any future owner |
| Installation certificate | Written confirmation of the installed system and products, the areas protected, and the licence of the installer | The builder, the certifier and the owner's records |
| Product information | Documentation of the physical system or termiticide applied, including chemical safety data sheets | Builder and owner |
| Maintenance & inspection advice | How to keep the barrier effective, and the recommended inspection frequency (AS 3660.2) | Homeowner |
We need the architectural or slab plan, the slab type (raft, waffle pod, suspended), the address, a rough pour date, and engineering details for retaining walls or step-downs.
Our scheduling follows the plumber's set-out and the concreter's pour date. Once services are in, tell us and we confirm collars before the pour inspection.
For developers and volume builders: consistent pricing, one point of contact, and documentation issued for every lot or dwelling.
Delays at occupation certificate stage usually come down to a missing durable notice or unclear records. We provide the complete set at once.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab size and perimeter run | Larger slabs need more membrane and perimeter protection, and more labour |
| System type | Full under-slab physical systems, perimeter-only systems and chemical or reticulation options are priced differently |
| How many penetrations | Each plumbing and electrical penetration through the slab requires its own collar |
| Site complexity | Extra detailing comes with retaining walls, step-downs, sandstone excavation and suspended floors |
| Number of visits | The staged install follows your build program, and multi-dwelling sites can be combined |
Send your plans for a fixed, written quote. There's no charge to quote.
A barrier is a continuous system, so it fails at the join. On Connells Point sites the usual culprits are a penetration added after our visit and a section of slab edge covered before anyone inspected it.
Clay soils also hold moisture against the slab, which is the condition termites want. The barrier matters more on those blocks, not less.
We install across 2221 and the surrounding St George & Bayside - new builds, knock-down rebuilds, extensions and owner-builder projects around Young Place Reserve and beyond.
NSW licence 5122967, and installation work done to AS 3660.1.
We attend to suit the builder's program, so the pour is never held up by a barrier stage.
You get the durable notice, the installation certificate and the product details.
Whether it is one dwelling, a granny flat, a duplex or a multi-unit project.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. The fixed price depends on the size of the property and how far the problem has spread, and we confirm it before we start - there is no call-out fee in Connells Point 2221. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Connells Point is about 16.2 km south-west of the CBD in the St George & Bayside, and we give you a firm arrival time rather than an all-day window.
The air never really dries out near the water, so sub-floors and lower rooms hold moisture through the year. termites need that damp more than they need food, and here they always have it.
A mix of walk-up blocks and free-standing homes, where the lower level and the sub-floor are what we concentrate on.
Yes - freestanding homes, townhouses, apartments, rentals and business premises in Connells Point 2221 are all covered, with documentation suitable for an agent or a strata manager.
It is, provided the instructions are followed. We will tell you what to keep clear of and for how long before we leave. Let us know about children, pets or fish tanks when you book.
Usually not. Most pre-construction termite barriers work is done with you there, and anything that needs the room vacated is for a short period we will tell you about beforehand.
Allow an hour to two hours for most properties. A bigger building, or one where the problem has spread, takes longer - and we would rather tell you that when quoting than rush it.
You get the AS 3660.1 certificate and the durable notice for the meter box. Call us if activity picks up again and we will arrange the return visit.
All of them. Connells Point sits alongside South Hurstville, Hurstville Grove, Blakehurst and Allawah in our coverage, and they are serviced on the same schedule.
Photographs from Elite jobs across Sydney — not stock imagery.
Fully insured technicians who turn up when they say they will. Quote within 30 minutes, no obligation.