What we need to quote
Architectural plans or a slab plan, slab type (raft, waffle pod, suspended), the site address, approximate pour date and any engineering details for retaining walls or step-downs.
Pre-Construction Termite Barriers in Crows Nest 2065 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Local technicians, fixed prices and a written report for every job in Crows Nest.
Postcode 2065 covers Crows Nest and the streets immediately around it. At about 4.8 km north of the CBD it falls in the Lower North Shore, where we have vans out daily. Our technicians are through Crows Nest most days, so same-day attendance is usually available.
A lot of our Crows Nest jobs are in the streets around Greenwood Plaza and Cammeray Golf Course, and we are out near St Leonards station regularly enough that the technician usually knows the access before they arrive.
North Sydney, Mosman, Willoughby, Lane Cove and Hunters Hill is the council area for Crows Nest, and we treat Cammeray, Naremburn and North Sydney on the same schedule. Period homes near the harbour tend to have sub-floors, original timber and gardens running down to the boundary, so the inspection covers well beyond the kitchen.
The termite calls we take from Crows Nest are mostly period houses and converted blocks where the lower level is the problem. If yours is one of them, mention it when you ring 1300 313 373 - it changes what the technician brings.
Sydney Harbour National Park and Secret Cove are on the same round, which means every part of 2065 is within our area.
When you book, we confirm the 2065 run the day before and give you an arrival time rather than a window. If we are already out at Cammeray or Naremburn that morning, we will usually offer you the earlier slot.
The value is detectability. A Crows Nest house with a barrier and no inspections has half a system.
A pre-construction barrier goes in while the slab is open. Once the concrete is poured and the frame is up, the same protection costs several times as much and never covers the same ground. On a Crows Nest build this is genuinely a now-or-never detail.
If a system is going to fail it fails at a detail, not across the whole footprint. That is why we photograph each penetration and each stage as it is completed.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A termite-resistant physical layer across the prepared ground, installed before the pour and covering the whole slab footprint.

Collars are sealed to every plumbing and electrical penetration through the slab, the most frequent concealed entry route there is.

The slab edge and the wall cavity take a physical barrier, which denies termites a concealed route up the outside of the slab.

A soil-applied APVMA-registered termiticide, with the option of reticulation pipework allowing recharge later without excavation.

Protection for the piers, bearers and suspended timber flooring on elevated or sloping sites.

Sydney sites bring retaining walls, sandstone excavation, step-downs and cut-and-fill, each of which needs specific detailing.
Once the slab is poured, the areas termites use most are sealed away for good.
A pre-construction barrier costs far less than a retrofitted system or repairs to termite damage later.
A compliant termite management system is required for new Class 1 homes and Class 10 outbuildings with termite-susceptible primary building elements.
The only time pipe penetrations and slab joints can be properly protected is before the concrete covers them.
Under-slab protection reaches areas that post-construction treatment simply cannot.
The Occupation Certificate will not be issued until the certifier has the installation certificate and durable notice.
Compliant protection with the paperwork to prove it satisfies buyers, building inspectors and lenders.
One call to a licensed Sydney technician gets you straight advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | Sheet membrane, stainless mesh or graded stone particles form a layer termites cannot pass, under the slab or at the perimeter | Lasts as long as the slab unless disturbed, and never needs a chemical top-up | Slab-on-ground homes, and anyone wanting a non-chemical system |
| Penetration collars | A physical collar sealed around every pipe and conduit crossing the slab | Long service life when fitted properly ahead of the pour | All slabs. Usually combined with a perimeter system. |
| Chemical soil barrier | Treated soil - termiticide applied beneath and around the building | Longevity depends on label and soil conditions, and it can be renewed | Cost-conscious builds, and some complex sites |
| Reticulation system | A pipe network laid before paving so termiticide can be pumped back into the soil | Rechargeable for the life of the building without digging up paths | Homes surrounded by paving or landscaping |
| Baiting (post-construction) | Ground stations used for monitoring and then baiting out the colony | Regular servicing of each station is required | For existing homes, see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Plans and slab details to us, and you get a system recommendation plus a fixed price stage by stage.
All service penetrations are collared, and the under-slab membrane or chemical treatment goes in once the site is prepared.
While the brickwork or cladding goes up, the perimeter and cavity barriers are installed, leaving no gap at the slab edge.
A chemical perimeter or reticulation system, where specified, is completed around the building before any paving or landscaping.
A durable notice fixed in the meter box records the system, and the installation certificate is provided to the builder and the certifier.
Handover includes maintenance advice and the recommended inspection schedule for keeping the system effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | The permanent meter-box notice recording the system, the install date, any chemical's life expectancy, the installer and inspection advice | The certifier, the owner, and owners after them |
| Installation certificate | Written confirmation covering the system and products used, the protected areas and the installer's licence | Builder, certifier, and the owner's own records |
| Product information | Information on the physical system or termiticide applied, including chemical safety data sheets | The builder and the owner |
| Maintenance & inspection advice | Guidance on keeping the barrier effective, with the AS 3660.2 recommended inspection frequency | Homeowner |
Architectural plans or a slab plan, slab type (raft, waffle pod, suspended), the site address, approximate pour date and any engineering details for retaining walls or step-downs.
Scheduling works around the plumber's set-out and the concreter's pour. Let us know when services are in and we confirm collar installation ahead of the pour inspection.
Developers and volume builders get consistent pricing, a single point of contact and documentation for every lot or dwelling.
Missing durable notices and unclear installation records hold up occupation certificates regularly. We hand over the full set together.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area & perimeter length | A larger footprint requires more membrane, more perimeter work and more labour |
| System type | There is a real price difference between under-slab physical, perimeter-only, chemical and reticulation systems |
| Number of penetrations | Every plumbing and electrical penetration through the slab needs a collar |
| Site complexity | Extra detailing comes with retaining walls, step-downs, sandstone excavation and suspended floors |
| Number of visits | The staged install follows your build program, and multi-dwelling sites can be combined |
Send your plans for a fixed, written quote. There's no charge to quote.
Attached garages, pergolas, alfresco slabs and later additions all need to be in the system. On Crows Nest builds the alfresco slab poured separately is the one most often left out.
Estates built on cleared farmland inherit the colonies already living in that soil. A new Crows Nest house is not a fresh start from a termite point of view - it is a new food source on an established site.
It is one of the few construction details that still matters commercially fifteen years later.
Licensed in NSW under 5122967, with all installations carried out to AS 3660.1.
We work to your builder's program, so a barrier stage never holds up a pour.
The durable notice, installation certificate and product details are all provided.
Whether it is one dwelling, a granny flat, a duplex or a multi-unit project.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. Two things move it: how big the place is, and how far it has already spread. We work that out on the phone or on site and tell you the figure before anything starts in Crows Nest. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Our Lower North Shore technicians cover Crows Nest daily, and you get a confirmed arrival time when you book.
Established gardens, original timber and sub-floors that no longer breathe - that is the profile of a harbourside house, and it suits termites very well.
Large older homes and converted apartments, with damp lower levels the recurring theme.
We do all of those. A good share of the Crows Nest jobs we run are tenanted or strata properties, so the written record comes as standard.
Yes. Everything we use is registered for the purpose and applied at label rates, and we place product where people and animals do not go. Tell us about pets, aquariums or anyone with a respiratory condition at booking.
You do not normally need to leave. Anything requiring an empty room is short, and you will know about it before the work starts.
Most pre-construction termite barriers jobs in a Crows Nest home take between one and two hours on site, depending on the size of the property and how much of it is affected.
You get the AS 3660.1 certificate and the durable notice for the meter box. So if they turn up again within the warranty, ring us and we will attend.
Yes - we work right across the North Sydney, Mosman, Willoughby, Lane Cove and Hunters Hill area, which takes in Crows Nest and the suburbs around it.
Photographs from Elite jobs across Sydney — not stock imagery.
Fully insured technicians who turn up when they say they will. Quote within 30 minutes, no obligation.