What we need to quote
Architectural plans or a slab plan, slab type (raft, waffle pod, suspended), the site address, approximate pour date and any engineering details for retaining walls or step-downs.
Pre-Construction Termite Barriers in Cammeray 2062 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
What we cover in Cammeray, and how quickly we can get there.
Postcode 2062 covers Cammeray and the streets immediately around it. At about 5.1 km north of the CBD it falls in the Lower North Shore, where we have vans out daily. Our technicians are through Cammeray most days, so same-day attendance is usually available.
Around Cammeray we work the pockets near Secret Cove, Northbridge Plaza and Cammeray Golf Course most often, so the van is rarely far away when a job comes in.
We work under the North Sydney, Mosman, Willoughby, Lane Cove and Hunters Hill area here, and Crows Nest, Northbridge and Cremorne are all on the same route, which matters when termite problems are moving between adjoining properties. The mix here is older houses and converted blocks near the water, where moisture under the floor is usually part of the story.
Around Cammeray the pattern is fairly consistent: older homes near the water with a sub-floor that never fully dries. Tell us which it is on the phone and we will come prepared for it.
Colin Street Road Reserve and Sydney Harbour National Park are on the same round, which means every part of 2062 is within our area.
Bookings for 2062 are confirmed the day before with a set arrival time, not an all-day window. Jobs at Crows Nest and Northbridge often share the same run, which is how earlier slots come up.
People expect a barrier to be a guarantee. It is a managed zone: it either stops termites or forces them into the open where they are visible.
A barrier does not stop being compliant when a garden bed goes in over it, but it does stop being inspectable - which amounts to the same thing a few years later.
People expect a barrier to be a wall. It is a managed zone: termites either cannot cross it or must build visible workings to do so.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A physical, termite-resistant membrane laid over the prepared ground ahead of the pour, covering the slab's entire footprint.

A collar is sealed around each plumbing pipe, conduit and service passing through the slab, because those are the most common hidden entry points.

Around the slab edge and up into the wall cavity, a physical barrier stops termites running hidden tunnels up the outside of the slab.

APVMA-registered termiticide applied to the soil, with the option of a reticulation pipe network so the barrier can be recharged later without digging.

Bearers, piers and suspended timber floors protected on sloping and elevated sites.

Detailed work against retaining walls, sandstone cuts, step-downs and the cut-and-fill sites common around Sydney.
Once the slab is poured, the areas termites use most are sealed away for good.
A barrier installed during the build costs far less than one retrofitted afterwards or any damage repair.
The NCC requires a compliant system on Class 1 dwellings and Class 10 outbuildings where primary building elements are termite-susceptible.
Pipe penetrations and slab joints are only fully protectable while they are still exposed, before the concrete goes over.
An under-slab system covers ground that nothing applied after construction can get to.
Your certifier must have the installation certificate and durable notice before the Occupation Certificate can issue.
Buyers, building inspectors and lenders all take comfort from documented, compliant termite protection.
One call to a licensed Sydney technician gets you straight advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | Sheet membrane, stainless mesh or graded stone particles form a layer termites cannot pass, under the slab or at the perimeter | Lasts as long as the slab unless disturbed, and never needs a chemical top-up | Slab-on-ground homes, and anyone wanting a non-chemical system |
| Penetration collars | Collars sealed physically to every pipe and conduit through the slab | Durable when fitted correctly ahead of the pour | All slabs, normally combined with a perimeter system |
| Chemical soil barrier | A treated soil zone formed with termiticide under and around the structure | Label and soil conditions govern how long it lasts; re-application is possible | Cost-conscious builds and certain complex sites |
| Reticulation system | A pipe network installed ahead of paving, allowing the soil to be re-treated by pumping | Can be topped up throughout the building's life without digging up paving | Homes surrounded by paving or heavy landscaping |
| Baiting (post-construction) | In-ground monitoring stations that take out the colony | Regular station servicing is required | Existing homes, covered under termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
We work from your drawings and slab details, specify a system, and fix the price stage by stage before anything is booked.
Every service gets its collar, then the under-slab membrane or chemical treatment is installed on the prepared site.
Perimeter and cavity barriers go in as the brickwork or cladding rises, so the slab edge is never left with a gap.
A chemical perimeter or reticulation system, where specified, is completed around the building before any paving or landscaping.
A durable notice goes into the meter box to record the system, with the installation certificate to the builder and certifier.
Handover includes maintenance advice and the recommended inspection schedule for keeping the system effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | Fixed permanently in the meter box, recording the system, install date, chemical life expectancy, installer and inspection advice | Certifier, current owner and future owners |
| Installation certificate | Confirms in writing the system and products installed, the areas protected and the installer's licence | The builder, the certifier, and the owner's records |
| Product information | Information on the physical system or termiticide applied, including chemical safety data sheets | The builder and the owner |
| Maintenance & inspection advice | Maintenance guidance and the AS 3660.2 recommended inspection frequency | Homeowner |
Architectural plans or a slab plan, slab type (raft, waffle pod, suspended), the site address, approximate pour date and any engineering details for retaining walls or step-downs.
Our scheduling follows the plumber's set-out and the concreter's pour date. Once services are in, tell us and we confirm collars before the pour inspection.
Volume builders and developers get the same pricing throughout, a single contact, and paperwork for each lot or dwelling.
Missing durable notices and unclear installation records hold up occupation certificates regularly. We hand over the full set together.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area and perimeter | A bigger footprint means more membrane, more perimeter work and more hours |
| System chosen | Full under-slab physical, perimeter-only, chemical and reticulation options are each priced differently |
| Number of penetrations | Every plumbing and electrical penetration through the slab needs a collar |
| Site complexity | Retaining walls, step-downs, sandstone excavation and suspended floors all require extra detailing |
| Number of site visits | Staged installations follow the build program. Multi-dwelling sites may be combined. |
Send your plans for a fixed, written quote. There's no charge to quote.
A documented, serviced termite management system is something a Cammeray buyer's pest inspector will note favourably. The absence of paperwork is something they will note the other way.
Clay soils also hold moisture against the slab, which is the condition termites want. The barrier matters more on those blocks, not less.
If a system is going to fail it fails at a detail, not across the whole footprint. That is why we photograph each penetration and each stage as it is completed.
We hold NSW Pest Management licence 5122967 and install to AS 3660.1.
We work around the builder's program so a barrier stage never delays the pour.
Everything the certifier wants: durable notice, installation certificate, product details.
Single dwellings, granny flats, duplexes and multi-unit developments.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. We quote on the property rather than the postcode, so a unit in Cammeray and a large house are priced differently. The figure is fixed before any work starts. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Cammeray sits roughly 5.1 km north of the CBD, inside our Lower North Shore run, so we book a time and keep to it.
Sub-floor ventilation on these older homes was designed for an open garden, and most of those gardens are now paved or planted out. The damp that leaves behind is what sustains termites.
Established housing near the water, much of it with original timber and sub-floor space that no longer ventilates properly.
We do all of those. A good share of the Cammeray jobs we run are tenanted or strata properties, so the written record comes as standard.
Yes. The products are registered for this use and applied at label rates, and placement keeps them away from where children and animals go. Let us know at booking about pets, fish tanks or anyone with asthma and we will plan the visit around it.
Most of the time you can carry on as normal. If a particular area needs to be empty we will flag it when we arrive and it is rarely more than a couple of hours.
Typically one to two hours on site. What extends it is size, access and how far the problem has gone, all of which are accounted for in the quote.
You get the AS 3660.1 certificate and the durable notice for the meter box. A return visit inside that period does not cost you anything.
Yes. As well as Cammeray we cover Crows Nest, Northbridge, Cremorne and Neutral Bay on the same runs, so a job that crosses a boundary can be handled in one visit.
Photographs from Elite jobs across Sydney — not stock imagery.
Fully insured technicians who turn up when they say they will. Quote within 30 minutes, no obligation.