What we need to quote
Send the architectural or slab plan, the slab type - raft, waffle pod or suspended - the site address, an approximate pour date, and engineering details for any retaining walls or step-downs.
Pre-Construction Termite Barriers in Dundas Valley 2117 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Where Dundas Valley sits, who covers it and what it costs.
Our Greater Parramatta & Cumberland technicians cover Dundas Valley and the rest of 2117 as a matter of course - it is only about 16.2 km north-west of the city. We run Dundas Valley on a regular route, and same-day attendance is usually available.
Most weeks we are somewhere between Eastwood Shopping Centre and Eastwood station in Dundas Valley, and Carlingford station is close enough to be on the same run.
This is the City of Parramatta and Cumberland area, and our runs here also take in Denistone West, Eastwood and Telopea. The building stock is close-packed, so we look at what the property adjoins before deciding where product goes.
Most Dundas Valley bookings come in as terraces and semis where the problem has come through a shared wall. Say which one applies when you call 1300 313 373 and the technician will have the right products on the van.
Our Dundas Valley runs also take in Baralyly Park and the area near Acacia Park, so the whole postcode is served.
We confirm your slot the day before and arrive at a stated time. Denistone West and Eastwood sit on the same run, so earlier appointments in 2117 come up regularly.
A barrier is a continuous system, so it fails at the join. On Dundas Valley sites the usual culprits are a penetration added after our visit and a section of slab edge covered before anyone inspected it.
The exposed slab edge is a designed part of the system: it is where an inspector can see workings before they reach the frame. Most of the failed inspection zones we find on Dundas Valley homes were buried by a landscaper who was never told.
AS 3660.1 is the standard for termite management in new construction, and it is what the certifier signs against. A Dundas Valley build without a compliant, certified system does not get its occupation certificate.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A sheet membrane that termites cannot pass, laid across the prepared ground before the pour so the entire footprint is covered.

Each service penetrating the slab - pipe, conduit, cable - takes a sealed collar. Penetrations are where termites most often get in unseen.

A barrier around the slab edge and into the wall cavity prevents termites tunnelling unseen up the slab's outer face.

The soil is treated with an APVMA-registered termiticide, and a reticulation network can be laid so recharging never means digging.

For sloping or elevated sites, protection covering the piers, bearers and suspended timber floor.

Retaining walls, sandstone excavation, step-downs and cut-and-fill - all common in Sydney, all needing their own detailing.
Once the slab is poured, the areas termites use most are sealed away for good.
It costs far less now than retrofitting later, and vastly less than repairing termite damage.
If a new Class 1 home or Class 10 outbuilding has termite-susceptible primary building elements, a compliant system is required.
Full protection of pipe penetrations and slab joints is possible only before the concrete is poured over them.
An under-slab system protects areas no post-construction treatment can reach.
No Occupation Certificate is issued without the installation certificate and durable notice going to the certifier.
Documented, compliant termite protection reassures buyers, building inspectors and lenders.
One call to a licensed Sydney technician gets you straight advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | Termite-resistant sheet, stainless mesh or graded stone laid under the slab or at the perimeter, impassable to termites | Lasts as long as the slab when undisturbed, with no chemical recharging | Slab-on-ground homes, and owners choosing a non-chemical option |
| Penetration collars | Each pipe and conduit through the slab is sealed with a physical collar | Long-lasting, assuming correct installation before the pour | Every slab, usually in combination with a perimeter system |
| Chemical soil barrier | Soil treated with termiticide to form a zone under and around the structure | Service life depends on label and soil, with re-application possible | Budget-conscious projects and certain complex sites |
| Reticulation system | Pipework laid before the paving so termiticide can be pumped back into the soil later | Rechargeable for the life of the building, with no need to lift paths | Houses ringed by paving or landscaping |
| Baiting (post-construction) | In-ground stations that monitor and then eliminate the colony | The stations require servicing on a regular schedule | Existing homes - see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Give us the plans and slab details; back comes a recommended system and a fixed price for every stage.
Penetration collars fitted to all services, and an under-slab membrane or chemical treatment installed once the site is prepared.
As the brickwork or cladding rises, perimeter and cavity barriers go in so the slab edge is left with no gap.
A chemical perimeter or reticulation system, where specified, is completed around the building before any paving or landscaping.
A durable notice goes into the meter box recording the system; builder and certifier each get the installation certificate.
The owner receives maintenance advice and a recommended inspection schedule to keep the system effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | Fixed permanently in the meter box, recording the system, install date, chemical life expectancy, installer and inspection advice | Certifier, current owner and future owners |
| Installation certificate | Written confirmation of the system and products installed, the areas protected and the installer's licence | The builder, the certifier and the owner's records |
| Product information | Specifications for the physical system or termiticide used, plus safety data sheets where chemicals are involved | Builder and owner |
| Maintenance & inspection advice | How to keep the barrier effective, and the recommended inspection frequency (AS 3660.2) | Homeowner |
Send the architectural or slab plan, the slab type - raft, waffle pod or suspended - the site address, an approximate pour date, and engineering details for any retaining walls or step-downs.
We work to the plumber's set-out and the concreter's program. Let us know when the services are in and collars are confirmed before the pour inspection.
For developers and volume builders: consistent pricing, one point of contact, and documentation issued for every lot or dwelling.
Missing durable notices or unclear installation records are a common reason for occupation certificate delays. We supply everything together so the certifier has what they need.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area & perimeter length | The bigger the footprint, the more membrane, perimeter protection and labour required |
| System type | Full under-slab physical systems, perimeter-only systems and chemical or reticulation options are priced differently |
| Service penetrations | Every plumbing and electrical penetration through the slab has to be collared |
| Site complexity | Retaining walls, step-downs, sandstone excavation and suspended floors add detailing |
| Number of site visits | Staging follows the build program, and multi-dwelling sites can be combined |
Send your plans for a fixed, written quote. There's no charge to quote.
Clay soils also hold moisture against the slab, which is the condition termites want. The barrier matters more on those blocks, not less.
Attached garages, pergolas, alfresco slabs and later additions all need to be in the system. On Dundas Valley builds the alfresco slab poured separately is the one most often left out.
Clearing removes the trees, not the nests. Stumps and root systems left in the ground around Dundas Valley developments keep colonies alive right under the new slabs.
Licensed in NSW under 5122967, with all installations carried out to AS 3660.1.
We fit the builder's program, so no barrier stage ever delays a pour.
Durable notice, installation certificate and product information, all handed over.
One house, a granny flat, a duplex, or a full multi-unit project.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. What changes the figure is the size of the building, how many areas are affected and the access. You get that number up front for Dundas Valley 2117, with no call-out fee. You get the AS 3660.1 certificate and the durable notice for the meter box.
At roughly 16.2 km north-west of the city, Dundas Valley is on a route we run regularly. Same-day attendance is usually available. You will be given a time, not a window.
Joined housing is the reason. Where walls, roof voids and sub-floors are continuous between properties, termites are a street-level problem rather than a house-level one.
Terraces and semis that share walls, roof voids and drainage - so we look at what the property adjoins before deciding where product goes.
Yes. We work in houses, units, strata blocks, rentals and commercial premises across Dundas Valley 2117, and we provide the written report agents and strata managers ask for.
It is, provided the instructions are followed. We will tell you what to keep clear of and for how long before we leave. Let us know about children, pets or fish tanks when you book.
Usually not. Most of the work is done with you in the house, and where a room does need to be clear it is for a short period we will tell you about on arrival.
Typically one to two hours on site. What extends it is size, access and how far the problem has gone, all of which are accounted for in the quote.
You get the AS 3660.1 certificate and the durable notice for the meter box. If activity continues past the expected period, call us and we will come back.
We do. Dundas Valley and Denistone West, Eastwood, Telopea and Ermington are all on the same route, which helps if you own more than one property in the area.
Photographs from Elite jobs across Sydney — not stock imagery.
Fully insured technicians who turn up when they say they will. Quote within 30 minutes, no obligation.