What we need to quote
Architectural or slab plans, slab type - raft, waffle pod or suspended - site address, approximate pour date, plus engineering details on any retaining walls or step-downs.
Pre-Construction Termite Barriers in East Ryde 2113 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
What we cover in East Ryde, and how quickly we can get there.
East Ryde sits about 9.5 km north-west of the CBD in the Ryde & the Northern District, and postcode 2113 is one we are in most weeks. Our technicians are through East Ryde most days, so same-day attendance is usually available.
Around East Ryde we work the pockets near North Ryde Park, Field of Mars Reserve and The Village - Riverside Corporate Park most often, so the van is rarely far away when a job comes in.
Lane Cove West, Macquarie Park and North Ryde are all on the same route as East Ryde. Most of the housing here shares a wall, a roof void or a sub-floor with something else, so we check what adjoins the property rather than treating it in isolation.
East Ryde jobs tend to be apartments and converted blocks where the kitchen backs onto a service riser. Let us know which when you ring and we will plan the visit around it.
We also work the streets near Coxs Road Mall and across toward North Ryde station - the whole of 2113 is covered.
Bookings for 2113 are confirmed the day before with a set arrival time, not an all-day window. Jobs at Lane Cove West and Macquarie Park often share the same run, which is how earlier slots come up.
Retro-fitting means drilling and injecting a finished slab, working around landscaping and services. It is slower, more expensive and less complete than doing it at construction on a East Ryde block.
The standard covers the system, the installation and the documentation. All three have to be right - a correctly installed system with missing paperwork still holds up a East Ryde handover.
A suspended floor is a different job again - the protection goes to piers, bearers and the subfloor rather than under a slab. On sloping East Ryde blocks that is common.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A physical, termite-resistant membrane laid over the prepared ground ahead of the pour, covering the slab's entire footprint.

Each pipe, conduit and service crossing the slab is sealed with a collar - penetrations being the most common concealed entry.

A physical barrier runs round the slab edge and into the cavity, so no concealed tunnel can be built up the slab's exterior.

An APVMA-registered termiticide into the soil, optionally with a reticulation pipe network so it can be recharged later without excavation.

Sloping and elevated blocks get their piers, bearers and suspended timber floors protected.

Retaining walls, sandstone cuts, step-downs and cut-and-fill sites are detailed individually - all of them common here.
Once the slab is poured, the areas termites use most are sealed away for good.
Installing at construction costs a fraction of retrofitting a system, let alone repairing termite damage later.
The NCC requires a compliant system on Class 1 dwellings and Class 10 outbuildings where primary building elements are termite-susceptible.
Pipe penetrations and slab joints can be fully sealed only while the concrete has yet to cover them.
An under-slab system protects areas no post-construction treatment can reach.
The certifier needs the installation certificate and the durable notice in hand to issue the Occupation Certificate.
Having the termite protection documented and compliant reassures buyers, inspectors and lenders alike.
Talk to a licensed Sydney technician today - honest advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A physical layer - membrane, stainless mesh or graded stone - that termites cannot get through, beneath the slab or at its edge | Intended to last the life of the slab if not disturbed, and requires no chemical top-up | Slab-on-ground builds, and owners who want to avoid chemicals |
| Penetration collars | Each pipe and conduit through the slab is sealed with a physical collar | Long-lasting, assuming correct installation before the pour | Every slab, usually in combination with a perimeter system |
| Chemical soil barrier | A treated soil zone formed with termiticide under and around the structure | Label and soil conditions govern how long it lasts; re-application is possible | Cost-conscious builds and certain complex sites |
| Reticulation system | A pre-paving pipe network allowing termiticide to be pumped back into the soil | Rechargeable over the building's life without lifting any paving | Homes surrounded by paving or landscaping |
| Baiting (post-construction) | Ground stations for monitoring, then baiting to eliminate the colony | The stations must be serviced regularly | Existing homes - see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
We work from your drawings and slab details, specify a system, and fix the price stage by stage before anything is booked.
Every service through the slab is collared first, then the under-slab membrane or chemical treatment goes down on the prepared site.
As the walls go up the perimeter and cavity barriers are installed, closing the slab edge as the work progresses.
The chemical perimeter or reticulation system, if specified, goes in around the completed building before paving and landscaping.
The meter box carries a durable notice recording the system, and the builder and certifier each receive the installation certificate.
Maintenance advice and a recommended inspection schedule are given to the owner to keep the system working.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent record in the meter box: the system, the date installed, the life expectancy of any chemical, the installer, and inspection advice | The certifier, the owner and any future owner |
| Installation certificate | Written confirmation of what system and products went in, the areas protected, and the installer's licence | Builder and certifier, plus the owner's records |
| Product information | Details of the physical system or termiticide used, including safety data sheets for chemicals | Builder and owner |
| Maintenance & inspection advice | Advice on maintaining the barrier and the recommended inspection interval under AS 3660.2 | Homeowner |
Architectural or slab plans, slab type - raft, waffle pod or suspended - site address, approximate pour date, plus engineering details on any retaining walls or step-downs.
Our scheduling follows the plumber's set-out and the concreter's pour date. Once services are in, tell us and we confirm collars before the pour inspection.
For developers and volume builders: consistent pricing, one point of contact, and documentation issued for every lot or dwelling.
Missing durable notices and unclear installation records hold up occupation certificates regularly. We hand over the full set together.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Size of slab and perimeter | Larger footprints take more membrane, more perimeter protection and more labour |
| System type | Full under-slab physical, perimeter-only, and chemical or reticulation systems are priced differently |
| Number of penetrations | Every plumbing and electrical penetration through the slab needs a collar |
| Complexity of the site | Retaining walls, step-downs, sandstone cuts and suspended floors each add detailing |
| How many visits | Installations are staged to the build program, and multi-dwelling sites can be combined |
Send your plans for a fixed, written quote. There's no charge to quote.
Reactive soil is the argument for a system that tolerates movement rather than a rigid one. We choose based on the soil report for the East Ryde site, not on a default.
An addition to a protected house is a new entry point unless it is tied into the existing system. We treat it as part of the whole, not a separate job.
It is one of the few construction details that still matters commercially fifteen years later.
NSW Pest Management licence 5122967. Every installation is to AS 3660.1.
The builder's program sets our timing, which means a barrier stage never holds up a pour.
You get the durable notice, the installation certificate and the product details.
Whether it is one dwelling, a granny flat, a duplex or a multi-unit project.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. The fixed price depends on the size of the property and how far the problem has spread, and we confirm it before we start - there is no call-out fee in East Ryde 2113. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Our Ryde & the Northern District technicians cover East Ryde daily, and you get a confirmed arrival time when you book.
Two things stack up here: shared structure and old drainage. Either one on its own is manageable; together they are why termites in this kind of housing is a street-level problem.
Joined older housing, often with a paved rear courtyard holding damp against the wall. Both things shape the treatment.
We do. A lot of our East Ryde work is rentals and strata, so the report, the products used and the areas treated are all recorded in writing for whoever needs them.
Yes, when it is applied properly. We use registered products at label rates and tell you which areas to keep clear and for how long. Mention pets, fish tanks or allergies when you book.
Usually not. Most of the work is done with you in the house, and where a room does need to be clear it is for a short period we will tell you about on arrival.
Between one and two hours covers the majority of jobs. We do not book so tightly that a technician has to cut a job short.
You get the AS 3660.1 certificate and the durable notice for the meter box. If it is not holding, call us - that is exactly what the warranty is for.
We do. East Ryde and Lane Cove West, Macquarie Park, North Ryde and Gladesville are all on the same route, which helps if you own more than one property in the area.
Photographs from Elite jobs across Sydney — not stock imagery.
Fast and fully insured, with a no-obligation quote back to you within 30 minutes.