What we need to quote
Architectural or slab plans, slab type - raft, waffle pod or suspended - site address, approximate pour date, plus engineering details on any retaining walls or step-downs.
Pre-Construction Termite Barriers in Lane Cove West 2066 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Where Lane Cove West sits, who covers it and what it costs.
Postcode 2066 covers Lane Cove West and the streets immediately around it. At about 8.2 km north-west of the CBD it falls in the Lower North Shore, where we have vans out daily. Our technicians are through Lane Cove West most days, so same-day attendance is usually available.
If you are near Batten Reserve, The Village Shopping Centre or Chatswood Golf Club, that is ground we cover constantly - it is the busiest part of Lane Cove West for us.
Lane Cove West is in the North Sydney, Mosman, Willoughby, Lane Cove and Hunters Hill area, and we cover Lane Cove, Lane Cove North and Riverview on the same runs - handy if you own more than one property or your termite problem has come from next door. A lot of the housing here is older and close to the water, so sub-floors and lower levels hold damp - and damp is what keeps a population going.
Most Lane Cove West bookings come in as period houses and converted blocks where the lower level is the problem. Say which one applies when you call 1300 313 373 and the technician will have the right products on the van.
We also work the streets near Hands Quarry Reserve and across toward Lane Cove Bowling and Recreation Club - the whole of 2066 is covered.
You get a confirmed time, not a window. We plan the 2066 run the day before, and if Lane Cove or Lane Cove North is on the same round there is often an earlier slot going.
A pre-construction barrier goes in while the slab is open. Once the concrete is poured and the frame is up, the same protection costs several times as much and never covers the same ground. On a Lane Cove West build this is genuinely a now-or-never detail.
The standard covers the system, the installation and the documentation. All three have to be right - a correctly installed system with missing paperwork still holds up a Lane Cove West handover.
If a system is going to fail it fails at a detail, not across the whole footprint. That is why we photograph each penetration and each stage as it is completed.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A termite-resistant physical layer across the prepared ground, installed before the pour and covering the whole slab footprint.

Each service penetrating the slab - pipe, conduit, cable - takes a sealed collar. Penetrations are where termites most often get in unseen.

Around the slab edge and up into the wall cavity, a physical barrier stops termites running hidden tunnels up the outside of the slab.

A soil-applied APVMA-registered termiticide, with the option of reticulation pipework allowing recharge later without excavation.

Piers, bearers and suspended timber floors protected, which matters on sloping and elevated blocks.

Retaining walls, sandstone cuts, step-downs and cut-and-fill sites are detailed individually - all of them common here.
Once the slab is poured, the areas termites use most are sealed away for good.
Doing it now is far cheaper than retrofitting a system later, and cheaper again than repairing termite damage.
If a new Class 1 home or Class 10 outbuilding has termite-susceptible primary building elements, a compliant system is required.
Before the pour is the only opportunity to fully protect the pipe penetrations and slab joints.
There are areas no later treatment can reach - an under-slab system covers them.
No Occupation Certificate is issued without the installation certificate and durable notice going to the certifier.
Buyers, inspectors and lenders all respond to documented, compliant termite protection.
Talk to a licensed Sydney technician today - honest advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A layer termites cannot chew - sheet, stainless mesh or graded stone - laid beneath the slab or at the perimeter | Built to last the life of the slab provided it is not disturbed, with no chemical recharging | Slab-on-ground builds, and owners who would rather avoid chemicals |
| Penetration collars | Physical collars sealed around all pipes and conduits penetrating the slab | Correctly installed before the pour, they last | All slabs, normally combined with a perimeter system |
| Chemical soil barrier | A zone of termiticide-treated soil under and around the structure | Service life follows the product label and soil conditions; re-application is possible | Budget-sensitive builds and certain complex sites |
| Reticulation system | Pipes laid in before the paving goes down, so termiticide can be pumped back into the soil | Recharging is possible for the building's life without disturbing paths | Properties ringed by paving or landscaping |
| Baiting (post-construction) | In-ground stations used to monitor and eliminate the colony | Stations have to be serviced regularly | Existing homes. See termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Send through the plans and slab details, and we will recommend a system with a fixed price for each stage.
Penetration collars to all services first, then the under-slab membrane or chemical treatment once the site is ready.
The perimeter and cavity barriers are fitted as brickwork or cladding progresses, so there is never a gap at the slab edge.
A specified chemical perimeter or reticulation system is finished around the building prior to paving and landscaping.
The system is recorded on a durable notice in the meter box, and the installation certificate goes to both the builder and the certifier.
Maintenance advice and a recommended inspection schedule are given to the owner to keep the system working.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | The permanent meter-box notice recording the system, the install date, any chemical's life expectancy, the installer and inspection advice | The certifier, the owner, and owners after them |
| Installation certificate | A written statement of system, products, protected areas and installer licence | Builder, certifier and the owner's records |
| Product information | What physical system or termiticide was used, together with safety data sheets for any chemical | Builder and owner |
| Maintenance & inspection advice | Guidance on keeping the barrier effective, with the AS 3660.2 recommended inspection frequency | Homeowner |
Architectural or slab plans, slab type - raft, waffle pod or suspended - site address, approximate pour date, plus engineering details on any retaining walls or step-downs.
Timing follows the plumbing set-out and the pour. Tell us when services are complete and we confirm the collars before the pour inspection.
Developers and volume builders get consistent pricing, a single point of contact and documentation for every lot or dwelling.
A missing durable notice or unclear installation record is a common cause of occupation certificate delay. We supply the lot together so the certifier has everything.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area & perimeter length | A larger footprint requires more membrane, more perimeter work and more labour |
| Which system | A full under-slab physical system, a perimeter-only system, and chemical or reticulation options all price differently |
| How many services | Each service penetrating the slab, plumbing or electrical, needs a collar |
| Difficulty of the site | Retaining walls, step-downs, sandstone excavation and suspended floors add to the detailing |
| Site visits required | Staging follows the build program; multi-dwelling sites may be combined into fewer visits |
Send your plans for a fixed, written quote. There's no charge to quote.
Our barrier work takes in Lane Cove West and across toward Lane Cove, on single builds and multi-lot developments alike.
A documented, serviced termite management system is something a Lane Cove West buyer's pest inspector will note favourably. The absence of paperwork is something they will note the other way.
Reactive soil is the argument for a system that tolerates movement rather than a rigid one. We choose based on the soil report for the Lane Cove West site, not on a default.
Licence 5122967 in NSW, and installations completed to AS 3660.1.
Our scheduling follows the builder's program - a barrier stage will not hold up your pour.
Durable notice, installation certificate and product information, all handed over.
One house, a granny flat, a duplex, or a full multi-unit project.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. Two things move it: how big the place is, and how far it has already spread. We work that out on the phone or on site and tell you the figure before anything starts in Lane Cove West. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Lane Cove West sits roughly 8.2 km north-west of the CBD, inside our Lower North Shore run, so we book a time and keep to it.
Old houses, steep blocks and heavy planting. The lower level cut into the slope stays cool and damp, and that is where termites settle well before anyone notices them upstairs.
Older houses on sloping blocks, many with a lower level cut into the slope - that level is usually where we start.
We do. A lot of our Lane Cove West work is rentals and strata, so the report, the products used and the areas treated are all recorded in writing for whoever needs them.
Yes, applied correctly. Products are registered for this use, placed out of reach rather than across open surfaces, and you will know what to stay off and for how long.
You do not normally need to leave. Anything requiring an empty room is short, and you will know about it before the work starts.
Most pre-construction termite barriers jobs in a Lane Cove West home take between one and two hours on site, depending on the size of the property and how much of it is affected.
You get the AS 3660.1 certificate and the durable notice for the meter box. A return visit within the warranty period costs you nothing.
Yes. As well as Lane Cove West we cover Lane Cove, Lane Cove North, Riverview and Linley Point on the same runs, so a job that crosses a boundary can be handled in one visit.
Photographs from Elite jobs across Sydney — not stock imagery.
Friendly, fully insured technicians and a no-obligation quote inside 30 minutes.