What we need to quote
Architectural or slab plans, slab type - raft, waffle pod or suspended - site address, approximate pour date, plus engineering details on any retaining walls or step-downs.
Pre-Construction Termite Barriers in Riverview 2066 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Local technicians, fixed prices and a written report for every job in Riverview.
Postcode 2066 covers Riverview and the streets immediately around it. At about 6.6 km north-west of the CBD it falls in the Lower North Shore, where we have vans out daily. Our technicians are through Riverview most days, so same-day attendance is usually available.
Our Riverview work takes in the streets by Tambourine Bay Reserve and Batten Reserve, through to Woolwich Baths Beach at the other end.
North Sydney, Mosman, Willoughby, Lane Cove and Hunters Hill is the council area for Riverview, and we treat Longueville, Lane Cove and Linley Point on the same schedule. The mix here is older houses and converted blocks near the water, where moisture under the floor is usually part of the story.
What we see in Riverview is older homes near the water with a sub-floor that never fully dries. Describing it accurately when you book saves a second visit.
The rest of 2066 is covered too, including the pockets around The Village Shopping Centre and Lane Cove Country Club.
You get a confirmed time, not a window. We plan the 2066 run the day before, and if Longueville or Lane Cove is on the same round there is often an earlier slot going.
Most Riverview builds are waffle pod or raft, and the two are detailed differently at the edge. Tell us which it is when you send the plans and the quote will be right first time.
Tell whoever does the landscaping on your Riverview build to keep soil, mulch and paving below the slab edge. It is the single most common way a good system is quietly defeated.
If a system is going to fail it fails at a detail, not across the whole footprint. That is why we photograph each penetration and each stage as it is completed.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

The whole slab footprint is protected by a termite-resistant membrane laid onto the prepared ground before concrete goes down.

Collars sealed to every plumbing pipe, conduit and service that passes through the slab. These are the most common hidden entry points for termites.

A physical barrier around the slab edge and into the wall cavity, which stops termites building concealed tunnels up the outside of the slab.

APVMA-registered termiticide applied to the soil. Add a reticulation network and the barrier can be topped up later without digging anything up.

Protection for the piers, bearers and suspended timber flooring on elevated or sloping sites.

Specific detailing where there are retaining walls, sandstone excavation, step-downs or cut-and-fill, as is common across Sydney.
Once the slab is poured, the areas termites use most are sealed away for good.
A pre-construction barrier costs far less than a retrofitted system or repairs to termite damage later.
If a new Class 1 home or Class 10 outbuilding has termite-susceptible primary building elements, a compliant system is required.
Pipe penetrations and slab joints are only fully protectable while they are still exposed, before the concrete goes over.
Under-slab protection reaches areas that post-construction treatment simply cannot.
No Occupation Certificate is issued without the installation certificate and durable notice going to the certifier.
Having the termite protection documented and compliant reassures buyers, inspectors and lenders alike.
Get a licensed Sydney technician on the phone today - honest advice, fixed quote in 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | Sheet membrane, stainless mesh or graded stone particles form a layer termites cannot pass, under the slab or at the perimeter | Lasts as long as the slab unless disturbed, and never needs a chemical top-up | Slab-on-ground homes, and anyone wanting a non-chemical system |
| Penetration collars | Physical collars sealed to each pipe and conduit through the slab | They last if the installation before the pour was done correctly | Every slab, generally alongside a perimeter system |
| Chemical soil barrier | A treated soil zone formed with termiticide under and around the structure | Label and soil conditions govern how long it lasts; re-application is possible | Cost-conscious builds and certain complex sites |
| Reticulation system | Pipework laid before paving, allowing termiticide to be pumped into the soil later | Can be recharged for the life of the building without lifting paths | Houses surrounded by paving or heavy landscaping |
| Baiting (post-construction) | In-ground monitoring stations that eliminate the colony | Stations need regular servicing | Existing homes, see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Plans and slab details to us, and you get a system recommendation plus a fixed price stage by stage.
All service penetrations are collared, and the under-slab membrane or chemical treatment goes in once the site is prepared.
The perimeter and cavity barriers are fitted as brickwork or cladding progresses, so there is never a gap at the slab edge.
A specified chemical perimeter or reticulation system is finished around the building prior to paving and landscaping.
A durable notice fixed in the meter box records the system, and the installation certificate is provided to the builder and the certifier.
Handover includes maintenance advice and the recommended inspection schedule for keeping the system effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | Fixed permanently in the meter box, recording the system, install date, chemical life expectancy, installer and inspection advice | Certifier, current owner and future owners |
| Installation certificate | A written statement of system, products, protected areas and installer licence | Builder, certifier and the owner's records |
| Product information | What physical system or termiticide was used, together with safety data sheets for any chemical | Builder and owner |
| Maintenance & inspection advice | Maintenance guidance and the AS 3660.2 recommended inspection frequency | Homeowner |
Architectural or slab plans, slab type - raft, waffle pod or suspended - site address, approximate pour date, plus engineering details on any retaining walls or step-downs.
Scheduling works around the plumber's set-out and the concreter's pour. Let us know when services are in and we confirm collar installation ahead of the pour inspection.
Consistent pricing across the project, a single point of contact, and documentation for every lot or dwelling.
Occupation certificate delays usually trace to a missing durable notice or poor records. We give the certifier the full set in one go.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Size of slab and perimeter | Larger footprints take more membrane, more perimeter protection and more labour |
| Type of system | Pricing differs between full under-slab physical systems, perimeter-only systems, and chemical or reticulation options |
| Service penetrations | Every plumbing and electrical penetration through the slab has to be collared |
| Difficulty of the site | Retaining walls, step-downs, sandstone excavation and suspended floors add to the detailing |
| Number of site visits | Staged installations follow the build program. Multi-dwelling sites may be combined. |
Send your plans for a fixed, written quote. There's no charge to quote.
Anything attached to the structure is part of the structure as far as termites are concerned.
Our barrier work takes in Riverview and across toward Longueville, on single builds and multi-lot developments alike.
Reactive soil is the argument for a system that tolerates movement rather than a rigid one. We choose based on the soil report for the Riverview site, not on a default.
NSW Pest Management licence 5122967. Every installation is to AS 3660.1.
The builder's program sets our timing, which means a barrier stage never holds up a pour.
Durable notice, installation certificate and product information, all handed over.
One house, a granny flat, a duplex, or a full multi-unit project.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. There is no call-out charge in Riverview 2066. The final number comes down to the property itself, and it is fixed before we begin. You get the AS 3660.1 certificate and the durable notice for the meter box.
At roughly 6.6 km north-west of the city, Riverview is on a route we run regularly. Same-day attendance is usually available. You will be given a time, not a window.
Sub-floor ventilation on these older homes was designed for an open garden, and most of those gardens are now paved or planted out. The damp that leaves behind is what sustains termites.
Established housing near the water, much of it with original timber and sub-floor space that no longer ventilates properly.
Yes. We work in houses, units, strata blocks, rentals and commercial premises across Riverview 2066, and we provide the written report agents and strata managers ask for.
It is, as long as you follow what we tell you on the day - usually keeping off treated surfaces for a couple of hours. Let us know at booking about young children, pets or an aquarium.
In the great majority of jobs, no. If one area needs to be left for an hour or two we say so before we start rather than after.
Allow one to two hours for a typical Riverview property. Larger homes, or ones where the problem has spread, take longer and we will say so when we quote.
You get the AS 3660.1 certificate and the durable notice for the meter box. If activity continues past the expected period, call us and we will come back.
We do. Riverview and Longueville, Lane Cove, Linley Point and Lane Cove West are all on the same route, which helps if you own more than one property in the area.
Photographs from Elite jobs across Sydney — not stock imagery.
Friendly, fully insured technicians and a no-obligation quote inside 30 minutes.