What we need to quote
We need the architectural or slab plan, the slab type (raft, waffle pod, suspended), the address, a rough pour date, and engineering details for retaining walls or step-downs.
Pre-Construction Termite Barriers in Longueville 2066 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Where Longueville sits, who covers it and what it costs.
Postcode 2066 covers Longueville and the streets immediately around it. At about 5.7 km north-west of the CBD it falls in the Lower North Shore, where we have vans out daily. Our technicians are through Longueville most days, so same-day attendance is usually available.
A lot of our Longueville jobs are in the streets around Woolwich Baths Beach and Lane Cove Country Club, and we are out near Wharf Road Reserve regularly enough that the technician usually knows the access before they arrive.
Under North Sydney, Mosman, Willoughby, Lane Cove and Hunters Hill, we cover Longueville and Riverview, Woolwich and Linley Point alike. Period homes near the harbour tend to have sub-floors, original timber and gardens running down to the boundary, so the inspection covers well beyond the kitchen.
Most Longueville bookings come in as period houses and converted blocks where the lower level is the problem. Say which one applies when you call 1300 313 373 and the technician will have the right products on the van.
Wherever you are in 2066, you are inside the area our technicians cover.
Bookings for 2066 are confirmed the day before with a set arrival time, not an all-day window. Jobs at Riverview and Woolwich often share the same run, which is how earlier slots come up.
Retro-fitting means drilling and injecting a finished slab, working around landscaping and services. It is slower, more expensive and less complete than doing it at construction on a Longueville block.
The system does not stop termites existing - it forces them into the open where an inspection will find them. That is why the annual check is part of the system rather than an optional extra.
The exposed slab edge is a designed part of the system: it is where an inspector can see workings before they reach the frame. Most of the failed inspection zones we find on Longueville homes were buried by a landscaper who was never told.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

The whole slab footprint is protected by a termite-resistant membrane laid onto the prepared ground before concrete goes down.

Every penetration through the slab is collared and sealed. These are the hidden entry points termites use most.

A physical barrier at the slab edge and continuing into the wall cavity, preventing concealed tunnelling up the slab's outside face.

A soil-applied APVMA-registered termiticide, with the option of reticulation pipework allowing recharge later without excavation.

Piers, bearers and suspended timber floors protected, which matters on sloping and elevated blocks.

Sydney sites bring retaining walls, sandstone excavation, step-downs and cut-and-fill, each of which needs specific detailing.
Once the slab is poured, the areas termites use most are sealed away for good.
It costs far less now than retrofitting later, and vastly less than repairing termite damage.
New homes (Class 1) and outbuildings (Class 10) with termite-susceptible primary building elements need a compliant termite management system.
Once concrete covers them, pipe penetrations and slab joints cannot be fully protected - it has to happen before the pour.
Areas no post-construction treatment can ever reach are covered by an under-slab system.
Your certifier needs the installation certificate and durable notice before issuing the Occupation Certificate.
Buyers, building inspectors and lenders all take comfort from documented, compliant termite protection.
A licensed Sydney technician will talk it through and give you a fixed quote within half an hour.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A physical layer - membrane, stainless mesh or graded stone - that termites cannot get through, beneath the slab or at its edge | Intended to last the life of the slab if not disturbed, and requires no chemical top-up | Slab-on-ground builds, and owners who want to avoid chemicals |
| Penetration collars | Physical collars sealed around all pipes and conduits penetrating the slab | Correctly installed before the pour, they last | All slabs, normally combined with a perimeter system |
| Chemical soil barrier | Treated soil - termiticide applied beneath and around the building | Longevity depends on label and soil conditions, and it can be renewed | Cost-conscious builds, and some complex sites |
| Reticulation system | Pipework installed before paving so the soil can be re-treated by pumping | Can be topped up for the life of the building with no excavation of paths | Houses surrounded by paving or landscaped areas |
| Baiting (post-construction) | In-ground stations that monitor and then eliminate the colony | The stations require servicing on a regular schedule | Existing homes - see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
We work from your drawings and slab details, specify a system, and fix the price stage by stage before anything is booked.
Penetration collars to all services first, then the under-slab membrane or chemical treatment once the site is ready.
The perimeter and cavity barriers are fitted as brickwork or cladding progresses, so there is never a gap at the slab edge.
Where specified, a chemical perimeter or reticulation system is completed around the finished building before paving and landscaping.
The system is recorded on a durable notice fixed in the meter box, and the installation certificate goes to the builder and the certifier.
Maintenance advice and an inspection schedule go to the owner, so the system keeps doing its job.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent notice fixed inside the meter box recording system, installation date, chemical life expectancy, installer and inspection advice | Certifier, owner and future owners |
| Installation certificate | A written record of the system and products installed, which areas are protected, and the installer's licence number | The builder, the certifier and the owner's file |
| Product information | Information on the physical system or termiticide applied, including chemical safety data sheets | The builder and the owner |
| Maintenance & inspection advice | How the barrier is kept effective, plus the inspection frequency AS 3660.2 recommends | The homeowner |
We need the architectural or slab plan, the slab type (raft, waffle pod, suspended), the address, a rough pour date, and engineering details for retaining walls or step-downs.
Scheduling works around the plumber's set-out and the concreter's pour. Let us know when services are in and we confirm collar installation ahead of the pour inspection.
Consistent pricing, one point of contact and per-lot documentation for developers and volume builders.
Delays at occupation certificate stage usually come down to a missing durable notice or unclear records. We provide the complete set at once.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Size of slab and perimeter | Larger footprints take more membrane, more perimeter protection and more labour |
| The system specified | Under-slab physical systems, perimeter-only systems and chemical or reticulation options carry different prices |
| Number of penetrations | Every plumbing and electrical penetration through the slab needs a collar |
| Complexity of the site | Retaining walls, step-downs, sandstone cuts and suspended floors each add detailing |
| Number of site visits | Staging follows the build program, and multi-dwelling sites can be combined |
Send your plans for a fixed, written quote. There's no charge to quote.
Attached garages, pergolas, alfresco slabs and later additions all need to be in the system. On Longueville builds the alfresco slab poured separately is the one most often left out.
Estates built on cleared farmland inherit the colonies already living in that soil. A new Longueville house is not a fresh start from a termite point of view - it is a new food source on an established site.
We install across 2066 and the surrounding Lower North Shore - new builds, knock-down rebuilds, extensions and owner-builder projects around Woolwich Baths Beach and beyond.
NSW licence 5122967, and installation work done to AS 3660.1.
We work around the builder's program so a barrier stage never delays the pour.
Durable notice, certificate of installation and product details - all supplied together.
From a single dwelling or granny flat through to duplexes and multi-unit projects.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. We quote on the property rather than the postcode, so a unit in Longueville and a large house are priced differently. The figure is fixed before any work starts. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Longueville is about 5.7 km north-west of the CBD in the Lower North Shore, and we give you a firm arrival time rather than an all-day window.
Established gardens, original timber and sub-floors that no longer breathe - that is the profile of a harbourside house, and it suits termites very well.
Period homes with sub-floors and mature gardens. The inspection covers the sub-floor, the perimeter and the planting, not just the interior.
Yes - freestanding homes, townhouses, apartments, rentals and business premises in Longueville 2066 are all covered, with documentation suitable for an agent or a strata manager.
It is, applied properly. We put product into cracks, voids and stations rather than across open surfaces, and we will tell you what to stay off and for how long before we leave.
Normally you can stay. Some treatments mean keeping out of a particular room briefly, and we will flag that when we arrive so you can plan around it.
Between one and two hours covers the majority of jobs. We do not book so tightly that a technician has to cut a job short.
You get the AS 3660.1 certificate and the durable notice for the meter box. A return visit within the warranty period costs you nothing.
We do. Longueville and Riverview, Woolwich, Linley Point and Greenwich are all on the same route, which helps if you own more than one property in the area.
Photographs from Elite jobs across Sydney — not stock imagery.
Insured, licensed technicians and a straight quote within 30 minutes - no obligation either way.