What we need to quote
Architectural plans or a slab plan, slab type (raft, waffle pod, suspended), the site address, approximate pour date and any engineering details for retaining walls or step-downs.
Pre-Construction Termite Barriers in Woolwich 2110 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
What we cover in Woolwich, and how quickly we can get there.
We treat termites right across 2110. Woolwich is roughly 4.7 km north-west of the city, which puts it well inside the Lower North Shore run our technicians work. Our technicians are through Woolwich most days, so same-day attendance is usually available.
Around Woolwich we work the pockets near Birkenhead Point Outlet Centre, Lane Cove Country Club and Clarkes Point Reserve most often, so the van is rarely far away when a job comes in.
The suburb sits in the North Sydney, Mosman, Willoughby, Lane Cove and Hunters Hill area. Longueville, Birchgrove and Greenwich are all covered on the same day, so a problem that has spread across a boundary can be handled in one visit. The mix here is older houses and converted blocks near the water, where moisture under the floor is usually part of the story.
Woolwich jobs tend to be waterfront and near-waterfront homes with damp sub-floors and mature gardens. Let us know which when you ring and we will plan the visit around it.
Beyond that we cover the rest of 2110, including the streets around Woolwich Baths Beach.
When you book, we confirm the 2110 run the day before and give you an arrival time rather than a window. If we are already out at Longueville or Birchgrove that morning, we will usually offer you the earlier slot.
The standard covers the system, the installation and the documentation. All three have to be right - a correctly installed system with missing paperwork still holds up a Woolwich handover.
A barrier is a continuous system, so it fails at the join. On Woolwich sites the usual culprits are a penetration added after our visit and a section of slab edge covered before anyone inspected it.
Every pipe and conduit through the slab is a path. Each one needs its own collar or sealed detail, and the ones most often missed on Woolwich builds are the wet-area penetrations - shower wastes and bath traps.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

Laid on the prepared ground before the pour, this termite-resistant membrane protects the complete footprint of the slab.

Collars sealed to every plumbing pipe, conduit and service that passes through the slab. These are the most common hidden entry points for termites.

A barrier around the slab edge and into the wall cavity prevents termites tunnelling unseen up the slab's outer face.

Termiticide registered with the APVMA goes into the soil, and a reticulation pipe network can be added so later recharging needs no digging.

On a sloping or elevated site, the bearers, piers and suspended timber floor are all protected.

Detailing against retaining walls, sandstone excavation, step-downs and cut-and-fill sites common across Sydney.
Once the slab is poured, the areas termites use most are sealed away for good.
Doing it now is far cheaper than retrofitting a system later, and cheaper again than repairing termite damage.
New homes (Class 1) and outbuildings (Class 10) with termite-susceptible primary building elements need a compliant termite management system.
Full protection of pipe penetrations and slab joints is possible only before the concrete is poured over them.
An under-slab system covers ground that nothing applied after construction can get to.
The installation certificate and durable notice have to reach the certifier before the Occupation Certificate is issued.
Compliant, documented termite protection is something buyers, building inspectors and lenders all look for.
A licensed Sydney technician will talk it through and give you a fixed quote within half an hour.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A termite-resistant layer (sheet, stainless mesh or graded stone particles) that termites can't chew through, laid under the slab or at the perimeter | Designed to last as long as the slab if it isn't disturbed. No chemical top-ups. | Slab-on-ground homes and owners who want a non-chemical option |
| Penetration collars | Collars physically sealed to every pipe and conduit through the slab | Long-lived where installation before the pour is done properly | Every slab, and typically with a perimeter system as well |
| Chemical soil barrier | A zone of termiticide-treated soil under and around the structure | Service life follows the product label and soil conditions; re-application is possible | Budget-sensitive builds and certain complex sites |
| Reticulation system | Pipes laid in before the paving goes down, so termiticide can be pumped back into the soil | Recharging is possible for the building's life without disturbing paths | Properties ringed by paving or landscaping |
| Baiting (post-construction) | Stations in the ground that monitor activity and eliminate the colony | They need servicing on a regular basis | Existing buildings - see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Give us the plans and slab details; back comes a recommended system and a fixed price for every stage.
Every service gets its collar, then the under-slab membrane or chemical treatment is installed on the prepared site.
The perimeter and cavity barriers are fitted as brickwork or cladding progresses, so there is never a gap at the slab edge.
If specified, the chemical perimeter or reticulation system is finished around the completed building before paving and landscaping start.
The system is recorded on a durable notice fixed in the meter box, and the installation certificate goes to the builder and the certifier.
The owner is given maintenance guidance and an inspection schedule that keeps the system effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent record in the meter box: the system, the date installed, the life expectancy of any chemical, the installer, and inspection advice | The certifier, the owner and any future owner |
| Installation certificate | Written confirmation of the installed system and products, the areas protected, and the licence of the installer | The builder, the certifier and the owner's records |
| Product information | The details of whichever physical system or termiticide was used, with safety data sheets for any chemical | Builder and owner |
| Maintenance & inspection advice | Keeping the barrier effective, and how often to inspect under AS 3660.2 | The homeowner |
Architectural plans or a slab plan, slab type (raft, waffle pod, suspended), the site address, approximate pour date and any engineering details for retaining walls or step-downs.
Our scheduling follows the plumber's set-out and the concreter's pour date. Once services are in, tell us and we confirm collars before the pour inspection.
We give developers and volume builders consistent pricing, one contact, and documentation lot by lot.
The common cause of occupation certificate delay is a missing durable notice or unclear records - so we supply everything together.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area and perimeter | A bigger footprint means more membrane, more perimeter work and more hours |
| The system specified | Under-slab physical systems, perimeter-only systems and chemical or reticulation options carry different prices |
| How many services | Each service penetrating the slab, plumbing or electrical, needs a collar |
| Site complexity | Retaining walls, step-downs, sandstone excavation and suspended floors all require extra detailing |
| Number of site visits | Staging follows the build program, and multi-dwelling sites can be combined |
Send your plans for a fixed, written quote. There's no charge to quote.
Much of western and south-western Sydney sits on reactive clay that moves with moisture. Around Woolwich that movement can open hairline paths underground where nothing is visible from the surface.
It is one of the few construction details that still matters commercially fifteen years later.
Estates built on cleared farmland inherit the colonies already living in that soil. A new Woolwich house is not a fresh start from a termite point of view - it is a new food source on an established site.
NSW licence 5122967, and installation work done to AS 3660.1.
We work around the builder's program so a barrier stage never delays the pour.
Durable notice, certificate of installation and product details - all supplied together.
Single dwellings and granny flats through to duplexes and multi-unit developments.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. Two things move it: how big the place is, and how far it has already spread. We work that out on the phone or on site and tell you the figure before anything starts in Woolwich. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Our Lower North Shore technicians cover Woolwich daily, and you get a confirmed arrival time when you book.
Period homes close to the water tend to have original timber, sub-floors and heavy planting around them - three things that keep termites supplied.
Large older homes and converted apartments, with damp lower levels the recurring theme.
Yes. Houses, townhouses, units, strata common property, rentals and commercial sites in Woolwich 2110 are all part of what we do, and the paperwork is the kind agents accept.
It is, as long as you follow what we tell you on the day - usually keeping off treated surfaces for a couple of hours. Let us know at booking about young children, pets or an aquarium.
In most cases you can stay. Where an area does need to be left clear it is for a couple of hours at most, and we say so before we start.
Between one and two hours covers the majority of jobs. We do not book so tightly that a technician has to cut a job short.
You get the AS 3660.1 certificate and the durable notice for the meter box. A return visit inside that period does not cost you anything.
Yes. As well as Woolwich we cover Longueville, Birchgrove, Greenwich and Drummoyne on the same runs, so a job that crosses a boundary can be handled in one visit.
Photographs from Elite jobs across Sydney — not stock imagery.
Fully insured technicians who turn up when they say they will. Quote within 30 minutes, no obligation.