What we need to quote
The architectural or slab plan, which slab type it is - raft, waffle pod, suspended - the site address, approximate pour date, and any retaining wall or step-down engineering.
Pre-Construction Termite Barriers in Leichhardt 2040 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Local technicians, fixed prices and a written report for every job in Leichhardt.
If you are in Leichhardt or anywhere else in 2040, you are in our Inner West patch, 5.1 km west of the CBD. Our technicians are through Leichhardt most days, so same-day attendance is usually available.
A lot of our Leichhardt jobs are in the streets around Leichhardt North station and Pine Square Reserve, and we are out near Fanny Durack Aquatic Centre regularly enough that the technician usually knows the access before they arrive.
Leichhardt is in the Inner West, Burwood, Strathfield and Canada Bay area, and we cover Stanmore, Lilyfield and Petersham on the same runs - handy if you own more than one property or your termite problem has come from next door. Terraces, semis and converted blocks share cavities and risers, which is why a single-unit treatment often does not hold on its own.
Leichhardt jobs tend to be apartments and converted blocks where the kitchen backs onto a service riser. Let us know which when you ring and we will plan the visit around it.
Norton Plaza and the remainder of 2040 are on the same run.
The 2040 run is set the day before and you are given an arrival time. Where Stanmore and Lilyfield fall on the same round, we can usually bring the visit forward.
People expect a barrier to be a wall. It is a managed zone: termites either cannot cross it or must build visible workings to do so.
AS 3660.1 is the standard for termite management in new construction, and it is what the certifier signs against. A Leichhardt build without a compliant, certified system does not get its occupation certificate.
Retro-fitting means drilling and injecting a finished slab, working around landscaping and services. It is slower, more expensive and less complete than doing it at construction on a Leichhardt block.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A sheet membrane that termites cannot pass, laid across the prepared ground before the pour so the entire footprint is covered.

Collars are sealed to every plumbing and electrical penetration through the slab, the most frequent concealed entry route there is.

Slab edge and wall cavity are both barriered, blocking the concealed tunnels termites otherwise build up the outside.

APVMA-registered termiticide into the soil, with optional reticulation pipework for recharging the barrier later without excavation.

Piers, bearers and suspended timber floors protected, which matters on sloping and elevated blocks.

Detailing against retaining walls, sandstone excavation, step-downs and cut-and-fill sites common across Sydney.
Once the slab is poured, the areas termites use most are sealed away for good.
Compared with a retrofit - or with repairing damage - a pre-construction barrier is a small cost.
Class 1 homes and Class 10 outbuildings with termite-susceptible primary building elements must have a compliant termite management system.
Pipe penetrations and slab joints can be fully sealed only while the concrete has yet to cover them.
Areas no post-construction treatment can ever reach are covered by an under-slab system.
Before issuing the Occupation Certificate, the certifier requires both the installation certificate and the durable notice.
Documented compliance on termite protection reassures the buyer, their inspector and the lender.
Talk to a licensed Sydney technician today - honest advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | Termite-resistant sheet, stainless mesh or graded stone laid under the slab or at the perimeter, impassable to termites | Lasts as long as the slab when undisturbed, with no chemical recharging | Slab-on-ground homes, and owners choosing a non-chemical option |
| Penetration collars | Collars physically sealed to every pipe and conduit through the slab | Long-lived where installation before the pour is done properly | Every slab, and typically with a perimeter system as well |
| Chemical soil barrier | Soil treated with termiticide to form a zone under and around the structure | Service life depends on label and soil, with re-application possible | Budget-conscious projects and certain complex sites |
| Reticulation system | A pipe network laid before paving so termiticide can be pumped back into the soil | Rechargeable for the life of the building without digging up paths | Homes surrounded by paving or landscaping |
| Baiting (post-construction) | In-ground stations that monitor and then eliminate the colony | The stations require servicing on a regular schedule | Existing homes - see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
With your plans and slab details we recommend a system and price every stage, fixed.
Penetration collars fitted to all services, and an under-slab membrane or chemical treatment installed once the site is prepared.
Barriers to the perimeter and cavity go in alongside the brickwork or cladding, eliminating any slab-edge gap.
If specified, the chemical perimeter or reticulation system is finished around the completed building before paving and landscaping start.
A durable notice in the meter box records the system. The installation certificate goes to the builder and certifier.
The owner receives the maintenance guidance and an inspection schedule, which is what keeps the system doing its job.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent plate in the meter box recording the system, the installation date, the life expectancy of any chemical, the installer and the inspection advice | The certifier, the owner, and whoever owns it next |
| Installation certificate | Written confirmation covering the system and products used, the protected areas and the installer's licence | Builder, certifier, and the owner's own records |
| Product information | Details of the physical system or termiticide used, including safety data sheets for chemicals | Builder and owner |
| Maintenance & inspection advice | Advice on maintaining the barrier and the recommended inspection interval under AS 3660.2 | Homeowner |
The architectural or slab plan, which slab type it is - raft, waffle pod, suspended - the site address, approximate pour date, and any retaining wall or step-down engineering.
We work to the plumber's set-out and the concreter's program. Let us know when the services are in and collars are confirmed before the pour inspection.
Consistent pricing across the project, a single point of contact, and documentation for every lot or dwelling.
Delays at occupation certificate stage usually come down to a missing durable notice or unclear records. We provide the complete set at once.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab size and perimeter run | Larger slabs need more membrane and perimeter protection, and more labour |
| Which system | A full under-slab physical system, a perimeter-only system, and chemical or reticulation options all price differently |
| Service penetrations | Every plumbing and electrical penetration through the slab has to be collared |
| Difficulty of the site | Retaining walls, step-downs, sandstone excavation and suspended floors add to the detailing |
| Number of visits | The staged install follows your build program, and multi-dwelling sites can be combined |
Send your plans for a fixed, written quote. There's no charge to quote.
Pre-purchase inspections ask about the system and the notice. Having both in order removes a negotiating point from the buyer's side.
Estates built on cleared farmland inherit the colonies already living in that soil. A new Leichhardt house is not a fresh start from a termite point of view - it is a new food source on an established site.
Anywhere in Leichhardt is within the area we attend for pre-construction work, including sites the larger operators will not travel to.
NSW Pest Management licence 5122967, with installations to AS 3660.1.
The builder's program sets our timing, which means a barrier stage never holds up a pour.
You get the durable notice, the installation certificate and the product details.
From a single dwelling or granny flat through to duplexes and multi-unit projects.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. We quote on the property rather than the postcode, so a unit in Leichhardt and a large house are priced differently. The figure is fixed before any work starts. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Leichhardt sits roughly 5.1 km west of the CBD, inside our Inner West run, so we book a time and keep to it.
Terraces and semis share walls, roof voids and sub-floors, so termites move between houses without ever going outside. That is the single biggest factor here.
Terraces, semis and converted blocks, which share structure - so we check what adjoins the property rather than treating it as a standalone building.
We do all of those. A good share of the Leichhardt jobs we run are tenanted or strata properties, so the written record comes as standard.
Yes, when it is applied properly. We use registered products at label rates and tell you which areas to keep clear and for how long. Mention pets, fish tanks or allergies when you book.
Most of the time you can carry on as normal. If a particular area needs to be empty we will flag it when we arrive and it is rarely more than a couple of hours.
An hour to two hours covers most jobs. The size of the building and the extent of the problem are what change it.
You get the AS 3660.1 certificate and the durable notice for the meter box. That is the point of the warranty - you do not pay twice for the same problem.
Yes. As well as Leichhardt we cover Stanmore, Lilyfield, Petersham and Annandale on the same runs, so a job that crosses a boundary can be handled in one visit.
Photographs from Elite jobs across Sydney — not stock imagery.
Friendly, fully insured technicians and a no-obligation quote inside 30 minutes.