What we need to quote
The architectural or slab plan, which slab type it is - raft, waffle pod, suspended - the site address, approximate pour date, and any retaining wall or step-down engineering.
Pre-Construction Termite Barriers in Mascot 2020 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Local technicians, fixed prices and a written report for every job in Mascot.
If you are in Mascot or anywhere else in 2020, you are in our Inner South & City Fringe patch, 6.9 km south of the CBD. Our technicians are through Mascot most days, so same-day attendance is usually available.
A lot of our Mascot jobs are in the streets around The Lakes Golf Course and Mascot station, and we are out near Robey Street Reserve regularly enough that the technician usually knows the access before they arrive.
The suburb sits in the City of Sydney and Bayside area. Rosebery, Eastlakes and Botany are all covered on the same day, so a problem that has spread across a boundary can be handled in one visit. Terraces, semis and converted blocks share cavities and risers, which is why a single-unit treatment often does not hold on its own.
Around Mascot the pattern is fairly consistent: apartments and converted blocks where the kitchen backs onto a service riser. Tell us which it is on the phone and we will come prepared for it.
All of 2020 falls inside the area we service.
We confirm your slot the day before and arrive at a stated time. Rosebery and Eastlakes sit on the same run, so earlier appointments in 2020 come up regularly.
A compliant barrier does not mean termites can never reach the building. It means they cannot reach it concealed - they have to build workings where an inspection will find them. That is why the annual inspection is part of the system, not an upsell.
A barrier is a continuous system, so it fails at the join. On Mascot sites the usual culprits are a penetration added after our visit and a section of slab edge covered before anyone inspected it.
Most Mascot builds are waffle pod or raft, and the two are detailed differently at the edge. Tell us which it is when you send the plans and the quote will be right first time.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A sheet membrane that termites cannot pass, laid across the prepared ground before the pour so the entire footprint is covered.

Collars sealed to every plumbing pipe, conduit and service that passes through the slab. These are the most common hidden entry points for termites.

A barrier around the slab edge and into the wall cavity prevents termites tunnelling unseen up the slab's outer face.

APVMA-registered termiticide applied to the soil. Add a reticulation network and the barrier can be topped up later without digging anything up.

Protection for bearers, piers and suspended timber floors on sloping or elevated sites.

Detailed work against retaining walls, sandstone cuts, step-downs and the cut-and-fill sites common around Sydney.
Once the slab is poured, the areas termites use most are sealed away for good.
Installing at construction costs a fraction of retrofitting a system, let alone repairing termite damage later.
Class 1 homes and Class 10 outbuildings with termite-susceptible primary building elements must have a compliant termite management system.
Once concrete covers them, pipe penetrations and slab joints cannot be fully protected - it has to happen before the pour.
No post-construction treatment reaches under the slab. An under-slab system does.
Your certifier needs the installation certificate and durable notice before issuing the Occupation Certificate.
Buyers, inspectors and lenders all respond to documented, compliant termite protection.
One call to a licensed Sydney technician gets you straight advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A layer termites cannot chew - sheet, stainless mesh or graded stone - laid beneath the slab or at the perimeter | Built to last the life of the slab provided it is not disturbed, with no chemical recharging | Slab-on-ground builds, and owners who would rather avoid chemicals |
| Penetration collars | Physical collars sealed to each pipe and conduit through the slab | They last if the installation before the pour was done correctly | Every slab, generally alongside a perimeter system |
| Chemical soil barrier | Termiticide applied to create a treated soil zone under and around the building | Its life comes down to the product label and the soil, and re-application is available | Budget builds and a number of complex sites |
| Reticulation system | Pipes laid in before the paving goes down, so termiticide can be pumped back into the soil | Recharging is possible for the building's life without disturbing paths | Properties ringed by paving or landscaping |
| Baiting (post-construction) | Stations in the ground that monitor activity and eliminate the colony | They need servicing on a regular basis | Existing buildings - see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
We work from your drawings and slab details, specify a system, and fix the price stage by stage before anything is booked.
Every service gets its collar, then the under-slab membrane or chemical treatment is installed on the prepared site.
As the brickwork or cladding rises, perimeter and cavity barriers go in so the slab edge is left with no gap.
If specified, the chemical perimeter or reticulation system is finished around the completed building before paving and landscaping start.
The system is recorded on a durable notice in the meter box, and the installation certificate goes to both the builder and the certifier.
The owner receives advice on maintenance plus a recommended inspection schedule to maintain the system.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | Fixed permanently in the meter box, recording the system, install date, chemical life expectancy, installer and inspection advice | Certifier, current owner and future owners |
| Installation certificate | Written confirmation of the installed system and products, the areas protected, and the licence of the installer | The builder, the certifier and the owner's records |
| Product information | Details of the physical system or the termiticide used, with safety data sheets for chemicals | The builder and the owner |
| Maintenance & inspection advice | How to keep the barrier effective, and the recommended inspection frequency (AS 3660.2) | Homeowner |
The architectural or slab plan, which slab type it is - raft, waffle pod, suspended - the site address, approximate pour date, and any retaining wall or step-down engineering.
Timing follows the plumbing set-out and the pour. Tell us when services are complete and we confirm the collars before the pour inspection.
Developers and volume builders get consistent pricing, a single point of contact and documentation for every lot or dwelling.
Occupation certificates are often held up by a missing durable notice or vague installation records. Everything is supplied together so the certifier is not left chasing.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area & perimeter length | Larger footprints need more membrane, more perimeter protection and more labour |
| System chosen | Full under-slab physical, perimeter-only, chemical and reticulation options are each priced differently |
| Number of penetrations | Every plumbing and electrical penetration through the slab requires a collar |
| Site complexity | Retaining walls, step-downs, sandstone excavation and suspended floors add detailing |
| Number of site visits | Staged installations follow the build program. Multi-dwelling sites may be combined. |
Send your plans for a fixed, written quote. There's no charge to quote.
Anywhere in Mascot is within the area we attend for pre-construction work, including sites the larger operators will not travel to.
Attached garages, pergolas, alfresco slabs and later additions all need to be in the system. On Mascot builds the alfresco slab poured separately is the one most often left out.
The assumption that a new build is low risk is backwards. New construction on previously vegetated land is exactly where we see early activity.
NSW Pest Management licence 5122967, installing to the AS 3660.1 standard.
The builder's program sets our timing, which means a barrier stage never holds up a pour.
Durable notice, certificate of installation and product details - all supplied together.
Single dwellings, granny flats, duplexes and multi-unit developments.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. Two things move it: how big the place is, and how far it has already spread. We work that out on the phone or on site and tell you the figure before anything starts in Mascot. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. We are about 6.9 km south of the city here, and Mascot is covered by the Inner South & City Fringe team.
Most of this area is terrace, semi and converted block, and those share more than people realise - cavities, roof spaces, drainage. termites use all of it.
Terraces, semis and converted blocks, which share structure - so we check what adjoins the property rather than treating it as a standalone building.
Yes. We work in houses, units, strata blocks, rentals and commercial premises across Mascot 2020, and we provide the written report agents and strata managers ask for.
Yes. The products are registered for this use and applied at label rates, and placement keeps them away from where children and animals go. Let us know at booking about pets, fish tanks or anyone with asthma and we will plan the visit around it.
In the great majority of jobs, no. If one area needs to be left for an hour or two we say so before we start rather than after.
Usually between one and two hours on site. Bigger properties and heavier infestations take more, and that is included in the quote rather than added afterwards.
You get the AS 3660.1 certificate and the durable notice for the meter box. If it is not holding, call us - that is exactly what the warranty is for.
We do. Mascot and Rosebery, Eastlakes, Botany and Beaconsfield are all on the same route, which helps if you own more than one property in the area.
Photographs from Elite jobs across Sydney — not stock imagery.
Fully insured technicians who turn up when they say they will. Quote within 30 minutes, no obligation.