What we need to quote
To quote we want the plans or slab plan, the slab type (raft, waffle pod or suspended), the address, an approximate pour date, and engineering for retaining walls or step-downs.
Pre-Construction Termite Barriers in Mount Vernon 2178 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Local technicians, fixed prices and a written report for every job in Mount Vernon.
Postcode 2178 covers Mount Vernon and the streets immediately around it. At about 36.9 km west of the CBD it falls in the South West Sydney, where we have vans out daily. We cover Mount Vernon on scheduled runs through the South West Sydney, and we will give you a firm time rather than a window.
Much of our Mount Vernon work is in the streets around Kemps Creek Nature Reserve.
We work under the Liverpool, Fairfield and Cumberland area here, and Kemps Creek, Cecil Park and Horsley Park are all on the same route, which matters when termite problems are moving between adjoining properties. Newer estate housing sits close together on small blocks, so what happens next door matters. We check the boundary and the fence line, not just the house.
Mount Vernon jobs tend to be newer homes on small blocks where next door has the same problem. Let us know which when you ring and we will plan the visit around it.
The whole of 2178 is on our regular run.
The 2178 run is set the day before and you are given an arrival time. Where Kemps Creek and Cecil Park fall on the same round, we can usually bring the visit forward.
People expect a barrier to be a wall. It is a managed zone: termites either cannot cross it or must build visible workings to do so.
A pre-construction barrier goes in while the slab is open. Once the concrete is poured and the frame is up, the same protection costs several times as much and never covers the same ground. On a Mount Vernon build this is genuinely a now-or-never detail.
We photograph each penetration as it is treated, so there is a record of what was done rather than an assurance.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A sheet membrane that termites cannot pass, laid across the prepared ground before the pour so the entire footprint is covered.

Every penetration through the slab is collared and sealed. These are the hidden entry points termites use most.

A barrier around the slab edge and into the wall cavity prevents termites tunnelling unseen up the slab's outer face.

APVMA-registered termiticide applied to the soil, with the option of a reticulation pipe network so the barrier can be recharged later without digging.

For sloping or elevated sites, protection covering the piers, bearers and suspended timber floor.

Detailing against retaining walls, sandstone excavation, step-downs and cut-and-fill sites common across Sydney.
Once the slab is poured, the areas termites use most are sealed away for good.
Compared with a retrofit - or with repairing damage - a pre-construction barrier is a small cost.
Class 1 homes and Class 10 outbuildings with termite-susceptible primary building elements must have a compliant termite management system.
Full protection of pipe penetrations and slab joints is possible only before the concrete is poured over them.
An under-slab system protects areas no post-construction treatment can reach.
No Occupation Certificate is issued without the installation certificate and durable notice going to the certifier.
Documented compliance on termite protection reassures the buyer, their inspector and the lender.
One call to a licensed Sydney technician gets you straight advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | Sheet, stainless mesh or graded stone creating a layer termites cannot chew through, under the slab or at the perimeter | As durable as the slab itself when left undisturbed, with no top-ups needed | Slab-on-ground homes and non-chemical preferences |
| Penetration collars | Collars sealed physically around each pipe and conduit passing through the slab | Durable provided they are installed correctly before the pour | Every slab, and normally paired with a perimeter system |
| Chemical soil barrier | A treated soil zone formed with termiticide under and around the structure | Label and soil conditions govern how long it lasts; re-application is possible | Cost-conscious builds and certain complex sites |
| Reticulation system | Pipework installed before paving so the soil can be re-treated by pumping | Can be topped up for the life of the building with no excavation of paths | Houses surrounded by paving or landscaped areas |
| Baiting (post-construction) | In-ground monitoring stations that eliminate the colony | Stations need regular servicing | Existing homes, see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Send us your plans and slab details. We recommend a system and give you a fixed price for every stage.
Every service through the slab is collared first, then the under-slab membrane or chemical treatment goes down on the prepared site.
Perimeter and cavity barriers go in as the brickwork or cladding rises, so the slab edge is never left with a gap.
Where specified, we complete the chemical perimeter or reticulation around the finished building, before paving and landscaping.
A durable notice in the meter box documents the system; the installation certificate is issued to the builder and certifier.
At handover the owner gets maintenance advice and a recommended inspection schedule so the system stays effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | The permanent meter-box notice recording the system, the install date, any chemical's life expectancy, the installer and inspection advice | The certifier, the owner, and owners after them |
| Installation certificate | Written confirmation of what system and products went in, the areas protected, and the installer's licence | Builder and certifier, plus the owner's records |
| Product information | Specifications for the physical system or termiticide used, plus safety data sheets where chemicals are involved | Builder and owner |
| Maintenance & inspection advice | Guidance on keeping the barrier effective, with the AS 3660.2 recommended inspection frequency | Homeowner |
To quote we want the plans or slab plan, the slab type (raft, waffle pod or suspended), the address, an approximate pour date, and engineering for retaining walls or step-downs.
Our scheduling follows the plumber's set-out and the concreter's pour date. Once services are in, tell us and we confirm collars before the pour inspection.
Developers and volume builders get consistent pricing, a single point of contact and documentation for every lot or dwelling.
Missing durable notices or unclear installation records are a common reason for occupation certificate delays. We supply everything together so the certifier has what they need.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area & perimeter length | The bigger the footprint, the more membrane, perimeter protection and labour required |
| The system specified | Under-slab physical systems, perimeter-only systems and chemical or reticulation options carry different prices |
| How many penetrations | Each plumbing and electrical penetration through the slab requires its own collar |
| Site complexity | Extra detailing comes with retaining walls, step-downs, sandstone excavation and suspended floors |
| How many visits | Installations are staged to the build program, and multi-dwelling sites can be combined |
Send your plans for a fixed, written quote. There's no charge to quote.
A barrier is a continuous system, so it fails at the join. On Mount Vernon sites the usual culprits are a penetration added after our visit and a section of slab edge covered before anyone inspected it.
Much of western and south-western Sydney sits on reactive clay that moves with moisture. Around Mount Vernon that movement can open hairline paths underground where nothing is visible from the surface.
Attached garages, pergolas, alfresco slabs and later additions all need to be in the system. On Mount Vernon builds the alfresco slab poured separately is the one most often left out.
NSW licence 5122967, and installation work done to AS 3660.1.
We work to your builder's program, so a barrier stage never holds up a pour.
Durable notice, installation certificate and product information, all handed over.
One house, a granny flat, a duplex, or a full multi-unit project.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. Two things move it: how big the place is, and how far it has already spread. We work that out on the phone or on site and tell you the figure before anything starts in Mount Vernon. You get the AS 3660.1 certificate and the durable notice for the meter box.
We cover it on scheduled runs, so a day's notice gets you the best slot. Mount Vernon sits roughly 36.9 km west of the CBD, inside our South West Sydney run, so we book a time and keep to it.
Estate housing is tightly spaced and near-identical, which means the conditions that suit termites at one address usually suit the whole street.
Modern detached homes on compact lots, usually slab on ground, so the perimeter and the entry points do most of the work.
We do. A lot of our Mount Vernon work is rentals and strata, so the report, the products used and the areas treated are all recorded in writing for whoever needs them.
Yes, with the usual care. Everything is APVMA-registered and used to label, and we will work around pets, aquariums and anyone in the house with a respiratory condition if you tell us when you book.
Most of the time you can carry on as normal. If a particular area needs to be empty we will flag it when we arrive and it is rarely more than a couple of hours.
Typically one to two hours on site. What extends it is size, access and how far the problem has gone, all of which are accounted for in the quote.
You get the AS 3660.1 certificate and the durable notice for the meter box. If activity continues past the expected period, call us and we will come back.
Yes. As well as Mount Vernon we cover Kemps Creek, Cecil Park, Horsley Park and Erskine Park on the same runs, so a job that crosses a boundary can be handled in one visit.
Photographs from Elite jobs across Sydney — not stock imagery.
Fully insured technicians who turn up when they say they will. Quote within 30 minutes, no obligation.