What we need to quote
Architectural plans or a slab plan, slab type (raft, waffle pod, suspended), the site address, approximate pour date and any engineering details for retaining walls or step-downs.
Pre-Construction Termite Barriers in Russell Lea 2046 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
What we cover in Russell Lea, and how quickly we can get there.
Postcode 2046 covers Russell Lea and the streets immediately around it. At about 6.3 km west of the CBD it falls in the Inner West, where we have vans out daily. Our technicians are through Russell Lea most days, so same-day attendance is usually available.
A lot of our Russell Lea jobs are in the streets around Leichhardt Park Aquatic Centre and Parramatta River Regional Park, and we are out near Birkenhead Point Outlet Centre regularly enough that the technician usually knows the access before they arrive.
Under Inner West, Burwood, Strathfield and Canada Bay, we cover Russell Lea and Rodd Point, Wareemba and Chiswick alike. Most of the housing here shares a wall, a roof void or a sub-floor with something else, so we check what adjoins the property rather than treating it in isolation.
Around Russell Lea the pattern is fairly consistent: terraces and semis where the problem has come through a shared wall. Tell us which it is on the phone and we will come prepared for it.
The whole of 2046 is covered, Larkins Reserve included.
When you book, we confirm the 2046 run the day before and give you an arrival time rather than a window. If we are already out at Rodd Point or Wareemba that morning, we will usually offer you the earlier slot.
A pre-construction barrier goes in while the slab is open. Once the concrete is poured and the frame is up, the same protection costs several times as much and never covers the same ground. On a Russell Lea build this is genuinely a now-or-never detail.
People expect a barrier to be a wall. It is a managed zone: termites either cannot cross it or must build visible workings to do so.
The value of the system on a Russell Lea home is detectability. Without the inspections that detectability is never used.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

The whole slab footprint is protected by a termite-resistant membrane laid onto the prepared ground before concrete goes down.

Every penetration through the slab is collared and sealed. These are the hidden entry points termites use most.

A barrier around the slab edge and into the wall cavity prevents termites tunnelling unseen up the slab's outer face.

Termiticide registered with the APVMA goes into the soil, and a reticulation pipe network can be added so later recharging needs no digging.

On a sloping or elevated site, the bearers, piers and suspended timber floor are all protected.

Specific detailing where there are retaining walls, sandstone excavation, step-downs or cut-and-fill, as is common across Sydney.
Once the slab is poured, the areas termites use most are sealed away for good.
Compared with a retrofit - or with repairing damage - a pre-construction barrier is a small cost.
Under the NCC, Class 1 homes and Class 10 outbuildings with termite-susceptible primary building elements require a compliant termite management system.
Pipe penetrations and slab joints are only fully protectable while they are still exposed, before the concrete goes over.
Under-slab protection reaches areas that post-construction treatment simply cannot.
Your certifier needs the installation certificate and durable notice before issuing the Occupation Certificate.
Compliant, documented termite protection is something buyers, building inspectors and lenders all look for.
One call to a licensed Sydney technician gets you straight advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A layer termites cannot chew - sheet, stainless mesh or graded stone - laid beneath the slab or at the perimeter | Built to last the life of the slab provided it is not disturbed, with no chemical recharging | Slab-on-ground builds, and owners who would rather avoid chemicals |
| Penetration collars | Physical collars sealed around all pipes and conduits penetrating the slab | Correctly installed before the pour, they last | All slabs, normally combined with a perimeter system |
| Chemical soil barrier | A treated zone created with termiticide in the soil below and around the building | The label and the soil conditions set the service life; it can be re-applied | Builds with tighter budgets, and some complex sites |
| Reticulation system | Pipework laid before the paving so termiticide can be pumped back into the soil later | Rechargeable for the life of the building, with no need to lift paths | Houses ringed by paving or landscaping |
| Baiting (post-construction) | In-ground stations used to monitor and eliminate the colony | Stations have to be serviced regularly | Existing homes. See termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
We work from your drawings and slab details, specify a system, and fix the price stage by stage before anything is booked.
Penetration collars fitted to all services, and an under-slab membrane or chemical treatment installed once the site is prepared.
Barriers to the perimeter and cavity go in alongside the brickwork or cladding, eliminating any slab-edge gap.
The chemical perimeter or reticulation system, if specified, goes in around the completed building before paving and landscaping.
A durable notice goes into the meter box to record the system, with the installation certificate to the builder and certifier.
At handover the owner is given maintenance advice and the recommended inspection schedule that keeps the system effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent notice in the meter box recording the system, installation date, the life expectancy of any chemical used, the installer and inspection advice | The certifier, the owner and future owners |
| Installation certificate | Written confirmation covering the system and products used, the protected areas and the installer's licence | Builder, certifier, and the owner's own records |
| Product information | Information on the physical system or termiticide applied, including chemical safety data sheets | The builder and the owner |
| Maintenance & inspection advice | How to keep the barrier effective, and the recommended inspection frequency (AS 3660.2) | Homeowner |
Architectural plans or a slab plan, slab type (raft, waffle pod, suspended), the site address, approximate pour date and any engineering details for retaining walls or step-downs.
Our scheduling follows the plumber's set-out and the concreter's pour date. Once services are in, tell us and we confirm collars before the pour inspection.
Consistent pricing, one point of contact and per-lot documentation for developers and volume builders.
The common cause of occupation certificate delay is a missing durable notice or unclear records - so we supply everything together.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab size and perimeter run | Larger slabs need more membrane and perimeter protection, and more labour |
| The system specified | Under-slab physical systems, perimeter-only systems and chemical or reticulation options carry different prices |
| Number of penetrations | Every plumbing and electrical penetration through the slab requires a collar |
| Complexity of the site | Retaining walls, step-downs, sandstone cuts and suspended floors each add detailing |
| Number of visits | The staged install follows your build program, and multi-dwelling sites can be combined |
Send your plans for a fixed, written quote. There's no charge to quote.
A barrier is a continuous system, so it fails at the join. On Russell Lea sites the usual culprits are a penetration added after our visit and a section of slab edge covered before anyone inspected it.
It is one of the few construction details that still matters commercially fifteen years later.
Reactive soil is the argument for a system that tolerates movement rather than a rigid one. We choose based on the soil report for the Russell Lea site, not on a default.
NSW licence 5122967, and installation work done to AS 3660.1.
We attend to suit the builder's program, so the pour is never held up by a barrier stage.
The durable notice, installation certificate and product details are all provided.
One house, a granny flat, a duplex, or a full multi-unit project.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. What changes the figure is the size of the building, how many areas are affected and the access. You get that number up front for Russell Lea 2046, with no call-out fee. You get the AS 3660.1 certificate and the durable notice for the meter box.
At roughly 6.3 km west of the city, Russell Lea is on a route we run regularly. Same-day attendance is usually available. You will be given a time, not a window.
Older inner suburbs combine shared structure with ageing drainage, and termites exploit both. Rear courtyards that have been paved over make it worse by trapping damp against the walls.
Older joined housing. The treatment takes account of shared walls, continuous sub-floors and roof voids that run between properties.
Yes - freestanding homes, townhouses, apartments, rentals and business premises in Russell Lea 2046 are all covered, with documentation suitable for an agent or a strata manager.
Yes, when it is applied properly. We use registered products at label rates and tell you which areas to keep clear and for how long. Mention pets, fish tanks or allergies when you book.
Generally no. We will tell you on arrival if any part of the job means keeping out of a room for a while, so there are no surprises.
Most pre-construction termite barriers jobs in a Russell Lea home take between one and two hours on site, depending on the size of the property and how much of it is affected.
You get the AS 3660.1 certificate and the durable notice for the meter box. Ring us if activity picks up again inside that period and we will arrange the return.
We cover the whole of Russell Lea, from the streets around Parramatta River Regional Park out to the suburb boundary and on into Rodd Point.
Photographs from Elite jobs across Sydney — not stock imagery.
Insured, licensed technicians and a straight quote within 30 minutes - no obligation either way.