What we need to quote
To quote we want the plans or slab plan, the slab type (raft, waffle pod or suspended), the address, an approximate pour date, and engineering for retaining walls or step-downs.
Pre-Construction Termite Barriers in Rydalmere 2116 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
What we cover in Rydalmere, and how quickly we can get there.
Postcode 2116 covers Rydalmere and the streets immediately around it. At about 17 km west of the CBD it falls in the Greater Parramatta & Cumberland, where we have vans out daily. We run Rydalmere on a regular route, and same-day attendance is usually available.
The Rydalmere addresses we attend cluster around Dundas station and Rydalmere Park. Hannibal Macarthur Park is another part of the suburb we are called to often.
Rydalmere is in the City of Parramatta and Cumberland area, and we cover Camellia, Dundas and Telopea on the same runs - handy if you own more than one property or your termite problem has come from next door. Most of the housing here shares a wall, a roof void or a sub-floor with something else, so we check what adjoins the property rather than treating it in isolation.
The bulk of our Rydalmere work is older semis with a paved rear courtyard and a sub-floor that no longer dries out. Mention the detail when you call 1300 313 373 - it decides how long we need on site.
Rangihou Reserve and Eric Primrose Reserve are on the same round, which means every part of 2116 is within our area.
The 2116 run is set the day before and you are given an arrival time. Where Camellia and Dundas fall on the same round, we can usually bring the visit forward.
We photograph each penetration as it is treated, so there is a record of what was done rather than an assurance.
A pre-construction barrier goes in while the slab is open. Once the concrete is poured and the frame is up, the same protection costs several times as much and never covers the same ground. On a Rydalmere build this is genuinely a now-or-never detail.
It is not guidance. It is the benchmark a private certifier assesses against, which is why we install to the approved plan rather than to habit.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

The whole slab footprint is protected by a termite-resistant membrane laid onto the prepared ground before concrete goes down.

Each pipe, conduit and service crossing the slab is sealed with a collar - penetrations being the most common concealed entry.

A barrier around the slab edge and into the wall cavity prevents termites tunnelling unseen up the slab's outer face.

An APVMA-registered termiticide into the soil, optionally with a reticulation pipe network so it can be recharged later without excavation.

On a sloping or elevated site, the bearers, piers and suspended timber floor are all protected.

Detailing for the complications Sydney blocks throw up: retaining walls, sandstone excavation, step-downs and cut-and-fill.
Once the slab is poured, the areas termites use most are sealed away for good.
Doing it now is far cheaper than retrofitting a system later, and cheaper again than repairing termite damage.
If a new Class 1 home or Class 10 outbuilding has termite-susceptible primary building elements, a compliant system is required.
Pipe penetrations and slab joints are only fully protectable while they are still exposed, before the concrete goes over.
No post-construction treatment reaches under the slab. An under-slab system does.
Your certifier needs the installation certificate and durable notice before issuing the Occupation Certificate.
Buyers, building inspectors and lenders all take comfort from documented, compliant termite protection.
One call to a licensed Sydney technician gets you straight advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A physical layer - membrane, stainless mesh or graded stone - that termites cannot get through, beneath the slab or at its edge | Intended to last the life of the slab if not disturbed, and requires no chemical top-up | Slab-on-ground builds, and owners who want to avoid chemicals |
| Penetration collars | Collars sealed physically to every pipe and conduit through the slab | Durable when fitted correctly ahead of the pour | All slabs, normally combined with a perimeter system |
| Chemical soil barrier | Termiticide applied to create a treated soil zone under and around the building | Its life comes down to the product label and the soil, and re-application is available | Budget builds and a number of complex sites |
| Reticulation system | Pipes laid in before the paving goes down, so termiticide can be pumped back into the soil | Recharging is possible for the building's life without disturbing paths | Properties ringed by paving or landscaping |
| Baiting (post-construction) | In-ground stations used to monitor and eliminate the colony | Stations have to be serviced regularly | Existing homes. See termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Plans and slab details to us, and you get a system recommendation plus a fixed price stage by stage.
Every service gets its collar, then the under-slab membrane or chemical treatment is installed on the prepared site.
Perimeter and cavity barriers installed as the brickwork or cladding goes up, so there is no gap at the slab edge.
A specified chemical perimeter or reticulation system is finished around the building prior to paving and landscaping.
A durable notice fixed in the meter box records the system, and the installation certificate is provided to the builder and the certifier.
Maintenance advice and a recommended inspection schedule are given to the owner to keep the system working.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent plate in the meter box recording the system, the installation date, the life expectancy of any chemical, the installer and the inspection advice | The certifier, the owner, and whoever owns it next |
| Installation certificate | A written record of the system and products installed, which areas are protected, and the installer's licence number | The builder, the certifier and the owner's file |
| Product information | What physical system or termiticide was used, together with safety data sheets for any chemical | Builder and owner |
| Maintenance & inspection advice | Advice on maintaining the barrier and the recommended inspection interval under AS 3660.2 | Homeowner |
To quote we want the plans or slab plan, the slab type (raft, waffle pod or suspended), the address, an approximate pour date, and engineering for retaining walls or step-downs.
We schedule to the plumber's set-out and the concreter's pour, confirming collar installation before the pour inspection once services are in.
Consistent pricing, one point of contact and per-lot documentation for developers and volume builders.
Delays at occupation certificate stage usually come down to a missing durable notice or unclear records. We provide the complete set at once.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Size of slab and perimeter | Larger footprints take more membrane, more perimeter protection and more labour |
| System type | Full under-slab physical systems, perimeter-only systems and chemical or reticulation options are priced differently |
| Penetration count | Every plumbing and electrical service through the slab needs a collar fitted |
| Site conditions | Detailing increases with retaining walls, step-downs, sandstone excavation and suspended floors |
| How many visits | Installations are staged to the build program, and multi-dwelling sites can be combined |
Send your plans for a fixed, written quote. There's no charge to quote.
The assumption that a new build is low risk is backwards. New construction on previously vegetated land is exactly where we see early activity.
Pre-purchase inspections ask about the system and the notice. Having both in order removes a negotiating point from the buyer's side.
Attached garages, pergolas, alfresco slabs and later additions all need to be in the system. On Rydalmere builds the alfresco slab poured separately is the one most often left out.
Licence 5122967 in NSW, and installations completed to AS 3660.1.
We attend to suit the builder's program, so the pour is never held up by a barrier stage.
We supply the durable notice, the installation certificate and the product details.
One house, a granny flat, a duplex, or a full multi-unit project.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. The fixed price depends on the size of the property and how far the problem has spread, and we confirm it before we start - there is no call-out fee in Rydalmere 2116. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Rydalmere is about 17 km west of the CBD in the Greater Parramatta & Cumberland, and we give you a firm arrival time rather than an all-day window.
Most of this area is terrace, semi and converted block, and those share more than people realise - cavities, roof spaces, drainage. termites use all of it.
Joined older housing, often with a paved rear courtyard holding damp against the wall. Both things shape the treatment.
Yes - freestanding homes, townhouses, apartments, rentals and business premises in Rydalmere 2116 are all covered, with documentation suitable for an agent or a strata manager.
Yes. Everything we use is registered for the purpose and applied at label rates, and we place product where people and animals do not go. Tell us about pets, aquariums or anyone with a respiratory condition at booking.
In the great majority of jobs, no. If one area needs to be left for an hour or two we say so before we start rather than after.
Most pre-construction termite barriers jobs in a Rydalmere home take between one and two hours on site, depending on the size of the property and how much of it is affected.
You get the AS 3660.1 certificate and the durable notice for the meter box. A return visit within the warranty period costs you nothing.
We do. Rydalmere and Camellia, Dundas, Telopea and Rosehill are all on the same route, which helps if you own more than one property in the area.
Photographs from Elite jobs across Sydney — not stock imagery.
Fully insured technicians who turn up when they say they will. Quote within 30 minutes, no obligation.