What we need to quote
Architectural or slab plans, slab type - raft, waffle pod or suspended - site address, approximate pour date, plus engineering details on any retaining walls or step-downs.
Pre-Construction Termite Barriers in Voyager Point 2172 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Local technicians, fixed prices and a written report for every job in Voyager Point.
Voyager Point sits about 23.5 km south-west of the CBD in the Canterbury-Bankstown, and postcode 2172 is one we are in most weeks. We run Voyager Point on a regular route, and same-day attendance is usually available.
Most weeks we are somewhere between Panania station and East Hills Park in Voyager Point, and Deepwater Park is close enough to be on the same run.
We work under the Canterbury-Bankstown area here, and Pleasure Point, East Hills and Hammondville are all on the same route, which matters when termite problems are moving between adjoining properties. Most of the housing here shares a wall, a roof void or a sub-floor with something else, so we check what adjoins the property rather than treating it in isolation.
The termite calls we take from Voyager Point are mostly apartments and converted blocks where the kitchen backs onto a service riser. If yours is one of them, mention it when you ring 1300 313 373 - it changes what the technician brings.
We cover the remainder of 2172 as well, from Riverlands Golf Course (closed) through to Brighton Lakes Golf Club.
Your appointment is confirmed the day before with a real arrival time. Because Pleasure Point and East Hills are covered on the same round, 2172 often has an earlier slot available.
Everything about a barrier is easier before the pour. That is the whole argument for getting it right the first time.
Every pipe and conduit through the slab is a path. Each one needs its own collar or sealed detail, and the ones most often missed on Voyager Point builds are the wet-area penetrations - shower wastes and bath traps.
The slab type changes the detail completely. A waffle pod slab has pods and perimeter beams to work around, a raft slab has different edge detailing, and a suspended floor needs the piers and bearers protected instead. We specify from the engineering, not from habit.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A physical, termite-resistant membrane laid over the prepared ground ahead of the pour, covering the slab's entire footprint.

Each service penetrating the slab - pipe, conduit, cable - takes a sealed collar. Penetrations are where termites most often get in unseen.

A physical barrier at the slab edge and continuing into the wall cavity, preventing concealed tunnelling up the slab's outside face.

APVMA-registered termiticide applied to the soil, with the option of a reticulation pipe network so the barrier can be recharged later without digging.

Sloping and elevated blocks get their piers, bearers and suspended timber floors protected.

Sydney sites bring retaining walls, sandstone excavation, step-downs and cut-and-fill, each of which needs specific detailing.
Once the slab is poured, the areas termites use most are sealed away for good.
Installing at construction costs a fraction of retrofitting a system, let alone repairing termite damage later.
If a new Class 1 home or Class 10 outbuilding has termite-susceptible primary building elements, a compliant system is required.
Pipe penetrations and slab joints can be fully sealed only while the concrete has yet to cover them.
Areas no post-construction treatment can ever reach are covered by an under-slab system.
The Occupation Certificate will not be issued until the certifier has the installation certificate and durable notice.
Buyers, inspectors and lenders all respond to documented, compliant termite protection.
Speak to a licensed Sydney technician now. Straight advice, and a fixed quote inside 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A layer termites cannot chew - sheet, stainless mesh or graded stone - laid beneath the slab or at the perimeter | Built to last the life of the slab provided it is not disturbed, with no chemical recharging | Slab-on-ground builds, and owners who would rather avoid chemicals |
| Penetration collars | Collars sealed physically to every pipe and conduit through the slab | Durable when fitted correctly ahead of the pour | All slabs, normally combined with a perimeter system |
| Chemical soil barrier | Termiticide applied to create a treated soil zone under and around the building | Its life comes down to the product label and the soil, and re-application is available | Budget builds and a number of complex sites |
| Reticulation system | Pipework laid before paving, allowing termiticide to be pumped into the soil later | Can be recharged for the life of the building without lifting paths | Houses surrounded by paving or heavy landscaping |
| Baiting (post-construction) | In-ground monitoring stations that eliminate the colony | Stations need regular servicing | Existing homes, see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Send the plans and slab details - we will specify a system and fix the price for each stage.
Every service gets its collar, then the under-slab membrane or chemical treatment is installed on the prepared site.
Perimeter and cavity barriers installed as the brickwork or cladding goes up, so there is no gap at the slab edge.
The chemical perimeter or reticulation system, if specified, goes in around the completed building before paving and landscaping.
A durable notice fixed in the meter box records the system, and the installation certificate is provided to the builder and the certifier.
Maintenance advice and an inspection schedule go to the owner, so the system keeps doing its job.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent meter box notice listing the system, installation date, life expectancy of any chemical used, the installer and inspection advice | The certifier, the owner and future owners |
| Installation certificate | A written record of the system and products installed, which areas are protected, and the installer's licence number | The builder, the certifier and the owner's file |
| Product information | Details of the physical system or the termiticide used, with safety data sheets for chemicals | The builder and the owner |
| Maintenance & inspection advice | Guidance on keeping the barrier effective, with the AS 3660.2 recommended inspection frequency | Homeowner |
Architectural or slab plans, slab type - raft, waffle pod or suspended - site address, approximate pour date, plus engineering details on any retaining walls or step-downs.
We schedule around the plumber's set-out and the concreter's pour. Tell us when services are in and we will confirm the collar installation before the pour inspection.
We give developers and volume builders consistent pricing, one contact, and documentation lot by lot.
Occupation certificates are often held up by a missing durable notice or vague installation records. Everything is supplied together so the certifier is not left chasing.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area & perimeter length | Larger footprints need more membrane, more perimeter protection and more labour |
| System type | Full under-slab physical systems, perimeter-only systems and chemical or reticulation options are priced differently |
| How many services | Each service penetrating the slab, plumbing or electrical, needs a collar |
| Site complexity | Retaining walls, step-downs, sandstone excavation and suspended floors all require extra detailing |
| How many visits | Installations are staged to the build program, and multi-dwelling sites can be combined |
Send your plans for a fixed, written quote. There's no charge to quote.
Attached garages, pergolas, alfresco slabs and later additions all need to be in the system. On Voyager Point builds the alfresco slab poured separately is the one most often left out.
A documented, serviced termite management system is something a Voyager Point buyer's pest inspector will note favourably. The absence of paperwork is something they will note the other way.
Much of western and south-western Sydney sits on reactive clay that moves with moisture. Around Voyager Point that movement can open hairline paths underground where nothing is visible from the surface.
NSW Pest Management licence 5122967, installing to the AS 3660.1 standard.
We attend to suit the builder's program, so the pour is never held up by a barrier stage.
Durable notice, installation certificate and product details, all supplied.
From a single dwelling or granny flat through to duplexes and multi-unit projects.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. The fixed price depends on the size of the property and how far the problem has spread, and we confirm it before we start - there is no call-out fee in Voyager Point 2172. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Our Canterbury-Bankstown technicians cover Voyager Point daily, and you get a confirmed arrival time when you book.
Older inner suburbs combine shared structure with ageing drainage, and termites exploit both. Rear courtyards that have been paved over make it worse by trapping damp against the walls.
Joined older housing, often with a paved rear courtyard holding damp against the wall. Both things shape the treatment.
We do. A lot of our Voyager Point work is rentals and strata, so the report, the products used and the areas treated are all recorded in writing for whoever needs them.
Yes, applied correctly. Products are registered for this use, placed out of reach rather than across open surfaces, and you will know what to stay off and for how long.
Generally no. We will tell you on arrival if any part of the job means keeping out of a room for a while, so there are no surprises.
For a standard Voyager Point home, one to two hours. We would rather tell you it will take longer up front than rush it.
You get the AS 3660.1 certificate and the durable notice for the meter box. So if they turn up again within the warranty, ring us and we will attend.
Yes. As well as Voyager Point we cover Pleasure Point, East Hills, Hammondville and Milperra on the same runs, so a job that crosses a boundary can be handled in one visit.
Photographs from Elite jobs across Sydney — not stock imagery.
Insured, licensed technicians and a straight quote within 30 minutes - no obligation either way.