What we need to quote
Architectural plans or a slab plan, slab type (raft, waffle pod, suspended), the site address, approximate pour date and any engineering details for retaining walls or step-downs.
Pre-Construction Termite Barriers in Collaroy Plateau 2097 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
What we cover in Collaroy Plateau, and how quickly we can get there.
If you are in Collaroy Plateau or anywhere else in 2097, you are in our Northern Beaches patch, 17.2 km north-east of the CBD. We run Collaroy Plateau on a regular route, and same-day attendance is usually available.
Our Collaroy Plateau work takes in the streets by Long Reef Golf Course and Edgar Gornall Wildflower Garden, through to Wabash Reserve at the other end.
Collaroy Plateau is in the Northern Beaches area, and we cover Narrabeen, Collaroy and Wheeler Heights on the same runs - handy if you own more than one property or your termite problem has come from next door. The coastal damp is the part that matters: sub-floors and ground-floor wet areas rarely dry out properly.
What we see in Collaroy Plateau is apartments where the problem is really in the building rather than the flat. Describing it accurately when you book saves a second visit.
Collaroy Beach and Augusta Shopping Centre are on the same round, which means every part of 2097 is within our area.
A pre-construction barrier goes in while the slab is open. Once the concrete is poured and the frame is up, the same protection costs several times as much and never covers the same ground. On a Collaroy Plateau build this is genuinely a now-or-never detail.
A compliant barrier does not mean termites can never reach the building. It means they cannot reach it concealed - they have to build workings where an inspection will find them. That is why the annual inspection is part of the system, not an upsell.
A barrier is a continuous system, so it fails at the join. On Collaroy Plateau sites the usual culprits are a penetration added after our visit and a section of slab edge covered before anyone inspected it.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

Before the pour, a termite-resistant membrane goes across the prepared ground, protecting the full slab footprint.

Collars are sealed to every plumbing and electrical penetration through the slab, the most frequent concealed entry route there is.

A physical barrier at the slab edge and continuing into the wall cavity, preventing concealed tunnelling up the slab's outside face.

An APVMA-registered termiticide into the soil, optionally with a reticulation pipe network so it can be recharged later without excavation.

Protection for bearers, piers and suspended timber floors on sloping or elevated sites.

Detailed work against retaining walls, sandstone cuts, step-downs and the cut-and-fill sites common around Sydney.
Once the slab is poured, the areas termites use most are sealed away for good.
A pre-construction barrier costs far less than a retrofitted system or repairs to termite damage later.
New Class 1 homes and Class 10 outbuildings need a compliant termite management system where the primary building elements are susceptible.
The only time pipe penetrations and slab joints can be properly protected is before the concrete covers them.
No post-construction treatment reaches under the slab. An under-slab system does.
The Occupation Certificate will not be issued until the certifier has the installation certificate and durable notice.
Compliant, documented termite protection is something buyers, building inspectors and lenders all look for.
One call to a licensed Sydney technician gets you straight advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A layer termites cannot chew - sheet, stainless mesh or graded stone - laid beneath the slab or at the perimeter | Built to last the life of the slab provided it is not disturbed, with no chemical recharging | Slab-on-ground builds, and owners who would rather avoid chemicals |
| Penetration collars | Collars physically sealed to every pipe and conduit through the slab | Long-lived where installation before the pour is done properly | Every slab, and typically with a perimeter system as well |
| Chemical soil barrier | Termiticide forming a treated zone in the soil beneath and around the building | How long it lasts depends on the label and the soil, and it can be re-applied | Builds working to a budget, and some complex sites |
| Reticulation system | A pre-paving pipe network allowing termiticide to be pumped back into the soil | Rechargeable over the building's life without lifting any paving | Homes surrounded by paving or landscaping |
| Baiting (post-construction) | Stations in the ground that monitor activity and eliminate the colony | They need servicing on a regular basis | Existing buildings - see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
We work from your plans and slab details, recommending a system and quoting each stage at a fixed price.
Penetration collars fitted to all services, and an under-slab membrane or chemical treatment installed once the site is prepared.
The perimeter and cavity barriers are fitted as brickwork or cladding progresses, so there is never a gap at the slab edge.
Where specified, we complete the chemical perimeter or reticulation around the finished building, before paving and landscaping.
The system is documented on a durable notice in the meter box, and the installation certificate goes to builder and certifier.
At handover the owner gets maintenance advice and a recommended inspection schedule so the system stays effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent plate in the meter box recording the system, the installation date, the life expectancy of any chemical, the installer and the inspection advice | The certifier, the owner, and whoever owns it next |
| Installation certificate | Written confirmation of the system and products installed, the areas protected and the installer's licence | The builder, the certifier and the owner's records |
| Product information | Specifications for the physical system or termiticide used, plus safety data sheets where chemicals are involved | Builder and owner |
| Maintenance & inspection advice | Maintenance guidance and the AS 3660.2 recommended inspection frequency | Homeowner |
Architectural plans or a slab plan, slab type (raft, waffle pod, suspended), the site address, approximate pour date and any engineering details for retaining walls or step-downs.
We work to the plumber's set-out and the concreter's program. Let us know when the services are in and collars are confirmed before the pour inspection.
We give developers and volume builders consistent pricing, one contact, and documentation lot by lot.
Occupation certificate delays usually trace to a missing durable notice or poor records. We give the certifier the full set in one go.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Size of slab and perimeter | Larger footprints take more membrane, more perimeter protection and more labour |
| The system specified | Under-slab physical systems, perimeter-only systems and chemical or reticulation options carry different prices |
| Service penetrations | Every plumbing and electrical penetration through the slab has to be collared |
| How complex the site is | Retaining walls, step-downs, sandstone excavation and suspended floors all add detailing |
| Site visits required | Staging follows the build program; multi-dwelling sites may be combined into fewer visits |
Send your plans for a fixed, written quote. There's no charge to quote.
Anything attached to the structure is part of the structure as far as termites are concerned.
Reactive soil is the argument for a system that tolerates movement rather than a rigid one. We choose based on the soil report for the Collaroy Plateau site, not on a default.
Anywhere in Collaroy Plateau is within the area we attend for pre-construction work, including sites the larger operators will not travel to.
NSW Pest Management licence 5122967, with installations to AS 3660.1.
Our scheduling follows the builder's program - a barrier stage will not hold up your pour.
The durable notice, installation certificate and product details are all provided.
From a single dwelling or granny flat through to duplexes and multi-unit projects.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. There is no call-out charge in Collaroy Plateau 2097. The final number comes down to the property itself, and it is fixed before we begin. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Collaroy Plateau sits roughly 17.2 km north-east of the CBD, inside our Northern Beaches run, so we book a time and keep to it.
Being near the water means humidity that never really drops. Sub-floors stay moist, lower levels stay cool and damp, and termites do well in both.
Walk-up blocks and free-standing houses, with moisture the common factor. The sub-floor gets as much attention as the kitchen.
Yes. Houses, townhouses, units, strata common property, rentals and commercial sites in Collaroy Plateau 2097 are all part of what we do, and the paperwork is the kind agents accept.
It is, as long as you follow what we tell you on the day - usually keeping off treated surfaces for a couple of hours. Let us know at booking about young children, pets or an aquarium.
Normally you can stay. Some treatments mean keeping out of a particular room briefly, and we will flag that when we arrive so you can plan around it.
For a standard Collaroy Plateau home, one to two hours. We would rather tell you it will take longer up front than rush it.
You get the AS 3660.1 certificate and the durable notice for the meter box. That is the point of the warranty - you do not pay twice for the same problem.
All of them. Collaroy Plateau sits alongside Narrabeen, Collaroy, Wheeler Heights and Cromer in our coverage, and they are serviced on the same schedule.
Photographs from Elite jobs across Sydney — not stock imagery.
Fast and fully insured, with a no-obligation quote back to you within 30 minutes.