What we need to quote
To quote we want the plans or slab plan, the slab type (raft, waffle pod or suspended), the address, an approximate pour date, and engineering for retaining walls or step-downs.
Pre-Construction Termite Barriers in Wheeler Heights 2097 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Local technicians, fixed prices and a written report for every job in Wheeler Heights.
Wheeler Heights is part of the Northern Beaches, 16.6 km or so north-east of the GPO, and 2097 is a postcode we know well. We run Wheeler Heights on a regular route, and same-day attendance is usually available.
The Wheeler Heights addresses we attend cluster around Toronto Avenue Reserve and Collaroy Beach. Augusta Shopping Centre is another part of the suburb we are called to often.
Wheeler Heights is in the Northern Beaches area, and we cover Collaroy Plateau, Cromer and Narrabeen on the same runs - handy if you own more than one property or your termite problem has come from next door. The coastal damp is the part that matters: sub-floors and ground-floor wet areas rarely dry out properly.
Around Wheeler Heights the pattern is fairly consistent: ground-floor units with a damp sub-floor, and houses where the garage sits below the living level. Tell us which it is on the phone and we will come prepared for it.
The rest of 2097 is covered too, including the pockets around Ambleside Reserve and Dee Why Bowling and Recreation Club.
The 2097 run is set the day before and you are given an arrival time. Where Collaroy Plateau and Cromer fall on the same round, we can usually bring the visit forward.
A suspended floor is a different job again - the protection goes to piers, bearers and the subfloor rather than under a slab. On sloping Wheeler Heights blocks that is common.
AS 3660.1 is the standard for termite management in new construction, and it is what the certifier signs against. A Wheeler Heights build without a compliant, certified system does not get its occupation certificate.
The value is detectability. A Wheeler Heights house with a barrier and no inspections has half a system.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

Laid on the prepared ground before the pour, this termite-resistant membrane protects the complete footprint of the slab.

Each service penetrating the slab - pipe, conduit, cable - takes a sealed collar. Penetrations are where termites most often get in unseen.

A physical barrier at the slab edge and continuing into the wall cavity, preventing concealed tunnelling up the slab's outside face.

APVMA-registered termiticide applied to the soil. Add a reticulation network and the barrier can be topped up later without digging anything up.

Sloping and elevated blocks get their piers, bearers and suspended timber floors protected.

Sydney sites bring retaining walls, sandstone excavation, step-downs and cut-and-fill, each of which needs specific detailing.
Once the slab is poured, the areas termites use most are sealed away for good.
The pre-construction price is far below what a retrofit costs, and nowhere near the cost of repairing damage.
New Class 1 homes and Class 10 outbuildings need a compliant termite management system where the primary building elements are susceptible.
Before the pour is the only opportunity to fully protect the pipe penetrations and slab joints.
An under-slab system protects the parts of the footprint no later treatment can access.
Your certifier must have the installation certificate and durable notice before the Occupation Certificate can issue.
Documented compliance on termite protection reassures the buyer, their inspector and the lender.
One call to a licensed Sydney technician gets you straight advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | Termite-resistant sheet, stainless mesh or graded stone laid under the slab or at the perimeter, impassable to termites | Lasts as long as the slab when undisturbed, with no chemical recharging | Slab-on-ground homes, and owners choosing a non-chemical option |
| Penetration collars | Physical collars sealed around all pipes and conduits penetrating the slab | Correctly installed before the pour, they last | All slabs, normally combined with a perimeter system |
| Chemical soil barrier | Termiticide applied to create a treated soil zone under and around the building | Its life comes down to the product label and the soil, and re-application is available | Budget builds and a number of complex sites |
| Reticulation system | A network of pipes installed before paving so termiticide can be re-injected into the soil | Rechargeable throughout the building's life, with no need to dig up paths | Homes with paving or landscaping all around them |
| Baiting (post-construction) | Stations in the ground that monitor activity and eliminate the colony | They need servicing on a regular basis | Existing buildings - see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Give us the plans and slab details; back comes a recommended system and a fixed price for every stage.
Every service through the slab is collared first, then the under-slab membrane or chemical treatment goes down on the prepared site.
While the brickwork or cladding goes up, the perimeter and cavity barriers are installed, leaving no gap at the slab edge.
A chemical perimeter or reticulation system, where specified, is completed around the building before any paving or landscaping.
The system is documented on a durable notice in the meter box, and the installation certificate goes to builder and certifier.
Maintenance advice and a recommended inspection schedule are given to the owner to keep the system working.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | Fixed permanently in the meter box, recording the system, install date, chemical life expectancy, installer and inspection advice | Certifier, current owner and future owners |
| Installation certificate | Written confirmation of the system and products installed, the areas protected and the installer's licence | The builder, the certifier and the owner's records |
| Product information | Information on the physical system or termiticide applied, including chemical safety data sheets | The builder and the owner |
| Maintenance & inspection advice | Keeping the barrier effective, and how often to inspect under AS 3660.2 | The homeowner |
To quote we want the plans or slab plan, the slab type (raft, waffle pod or suspended), the address, an approximate pour date, and engineering for retaining walls or step-downs.
We schedule around the plumber's set-out and the concreter's pour. Tell us when services are in and we will confirm the collar installation before the pour inspection.
Developers and volume builders get consistent pricing, a single point of contact and documentation for every lot or dwelling.
A missing durable notice or unclear installation record is a common cause of occupation certificate delay. We supply the lot together so the certifier has everything.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area & perimeter length | The bigger the footprint, the more membrane, perimeter protection and labour required |
| The system specified | Under-slab physical systems, perimeter-only systems and chemical or reticulation options carry different prices |
| Penetration count | Every plumbing and electrical service through the slab needs a collar fitted |
| How complex the site is | Retaining walls, step-downs, sandstone excavation and suspended floors all add detailing |
| Number of site visits | Staged installations follow the build program. Multi-dwelling sites may be combined. |
Send your plans for a fixed, written quote. There's no charge to quote.
It is one of the few construction details that still matters commercially fifteen years later.
We install across 2097 and the surrounding Northern Beaches - new builds, knock-down rebuilds, extensions and owner-builder projects around Toronto Avenue Reserve and beyond.
Estates built on cleared farmland inherit the colonies already living in that soil. A new Wheeler Heights house is not a fresh start from a termite point of view - it is a new food source on an established site.
Licensed in NSW under 5122967, with all installations carried out to AS 3660.1.
We work to your builder's program, so a barrier stage never holds up a pour.
Everything the certifier wants: durable notice, installation certificate, product details.
Single dwellings, granny flats, duplexes and multi-unit developments.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. The fixed price depends on the size of the property and how far the problem has spread, and we confirm it before we start - there is no call-out fee in Wheeler Heights 2097. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. Our Northern Beaches technicians cover Wheeler Heights daily, and you get a confirmed arrival time when you book.
The sea air is the factor people miss. It keeps sub-floors and ground-floor bathrooms damp long after summer, which is enough to keep termites going.
Units close to the water, houses further back, and sub-floors that hold moisture in both.
We do all of those. A good share of the Wheeler Heights jobs we run are tenanted or strata properties, so the written record comes as standard.
It is, as long as you follow what we tell you on the day - usually keeping off treated surfaces for a couple of hours. Let us know at booking about young children, pets or an aquarium.
Usually not. Most pre-construction termite barriers work is done with you there, and anything that needs the room vacated is for a short period we will tell you about beforehand.
Allow one to two hours for a typical Wheeler Heights property. Larger homes, or ones where the problem has spread, take longer and we will say so when we quote.
You get the AS 3660.1 certificate and the durable notice for the meter box. Call us if activity picks up again and we will arrange the return visit.
Yes. As well as Wheeler Heights we cover Collaroy Plateau, Cromer, Narrabeen and Collaroy on the same runs, so a job that crosses a boundary can be handled in one visit.
Photographs from Elite jobs across Sydney — not stock imagery.
Fast, friendly, fully insured technicians. No-obligation quote within 30 minutes.