What we need to quote
To quote we want the plans or slab plan, the slab type (raft, waffle pod or suspended), the address, an approximate pour date, and engineering for retaining walls or step-downs.
Pre-Construction Termite Barriers in Pyrmont 2009 — local technicians, fixed prices and a written report. Barriers are quoted off your plans and slab details.
Real, verified feedback from people we've helped — straight from Google.
Local technicians, fixed prices and a written report for every job in Pyrmont.
We treat termites right across 2009. Pyrmont is roughly 1.4 km west of the city, which puts it well inside the Sydney CBD & Inner City run our technicians work. Our technicians are through Pyrmont most days, so same-day attendance is usually available.
Our Pyrmont work takes in the streets by The Star station and Pyrmont Bay station, through to Pyrmont Bay Park at the other end.
We cover Barangaroo, Millers Point and Sydney on the same runs as Pyrmont, which helps when termite problems are moving between neighbouring properties. In a tower the population is usually shared. We treat your unit and tell you plainly if the source is common property, because that is what the building has to act on.
Most Pyrmont bookings come in as apartments where the problem turns out to be in the riser or the bin room rather than the flat. Say which one applies when you call 1300 313 373 and the technician will have the right products on the van.
We also work the streets near Giba Park and across toward Westfield Sydney - the whole of 2009 is covered.
We confirm your slot the day before and arrive at a stated time. Barangaroo and Millers Point sit on the same run, so earlier appointments in 2009 come up regularly.
The exposed slab edge is a designed part of the system: it is where an inspector can see workings before they reach the frame. Most of the failed inspection zones we find on Pyrmont homes were buried by a landscaper who was never told.
A compliant barrier does not mean termites can never reach the building. It means they cannot reach it concealed - they have to build workings where an inspection will find them. That is why the annual inspection is part of the system, not an upsell.
Most Pyrmont builds are waffle pod or raft, and the two are detailed differently at the edge. Tell us which it is when you send the plans and the quote will be right first time.
Photos from our own Sydney installations, not stock images. We recommend the right mix for your slab design, site and budget.

A termite-resistant physical layer across the prepared ground, installed before the pour and covering the whole slab footprint.

Each service penetrating the slab - pipe, conduit, cable - takes a sealed collar. Penetrations are where termites most often get in unseen.

Around the slab edge and up into the wall cavity, a physical barrier stops termites running hidden tunnels up the outside of the slab.

An APVMA-registered termiticide into the soil, optionally with a reticulation pipe network so it can be recharged later without excavation.

Sloping and elevated blocks get their piers, bearers and suspended timber floors protected.

Retaining walls, sandstone cuts, step-downs and cut-and-fill sites are detailed individually - all of them common here.
Once the slab is poured, the areas termites use most are sealed away for good.
The pre-construction price is far below what a retrofit costs, and nowhere near the cost of repairing damage.
The NCC requires a compliant system on Class 1 dwellings and Class 10 outbuildings where primary building elements are termite-susceptible.
The only time pipe penetrations and slab joints can be properly protected is before the concrete covers them.
Areas no post-construction treatment can ever reach are covered by an under-slab system.
Your certifier needs the installation certificate and durable notice before issuing the Occupation Certificate.
Buyers, inspectors and lenders all respond to documented, compliant termite protection.
Talk to a licensed Sydney technician today - honest advice and a fixed quote within 30 minutes.
Both approaches can comply with AS 3660.1. Many Sydney builds use a combination.
| System | How it works | Durability & upkeep | Best suited to |
|---|---|---|---|
| Physical membrane, mesh or graded stone | A layer termites cannot chew - sheet, stainless mesh or graded stone - laid beneath the slab or at the perimeter | Built to last the life of the slab provided it is not disturbed, with no chemical recharging | Slab-on-ground builds, and owners who would rather avoid chemicals |
| Penetration collars | A physical collar sealed around each pipe and conduit passing through the slab | Long service life where the install before the pour was done properly | Every slab, and usually alongside a perimeter system |
| Chemical soil barrier | A treated zone of termiticide in the soil under and around the building | Service life depends on the product label and soil conditions. It can be re-applied. | Budget-conscious builds and some complex sites |
| Reticulation system | A pipe network installed ahead of paving, allowing the soil to be re-treated by pumping | Can be topped up throughout the building's life without digging up paving | Homes surrounded by paving or heavy landscaping |
| Baiting (post-construction) | Ground stations used for monitoring and then baiting out the colony | Regular servicing of each station is required | For existing homes, see termite control |
Termite barriers are installed in stages that follow the build, not in a single visit.
Send through the plans and slab details, and we will recommend a system with a fixed price for each stage.
Collars go onto every service penetration, and once the site is prepared the under-slab membrane or chemical treatment is installed.
Perimeter and cavity barriers installed as the brickwork or cladding goes up, so there is no gap at the slab edge.
Where specified, a chemical perimeter or reticulation system is completed around the finished building before paving and landscaping.
The system is recorded on a durable notice in the meter box, and the installation certificate goes to both the builder and the certifier.
The owner receives maintenance advice and a recommended inspection schedule to keep the system effective.
| Document | What it is | Who needs it |
|---|---|---|
| Durable notice | A permanent meter box notice listing the system, installation date, life expectancy of any chemical used, the installer and inspection advice | The certifier, the owner and future owners |
| Installation certificate | Written confirmation covering the system and products used, the protected areas and the installer's licence | Builder, certifier, and the owner's own records |
| Product information | Information on the physical system or termiticide applied, including chemical safety data sheets | The builder and the owner |
| Maintenance & inspection advice | Keeping the barrier effective, and how often to inspect under AS 3660.2 | The homeowner |
To quote we want the plans or slab plan, the slab type (raft, waffle pod or suspended), the address, an approximate pour date, and engineering for retaining walls or step-downs.
We schedule around the plumber's set-out and the concreter's pour. Tell us when services are in and we will confirm the collar installation before the pour inspection.
Developers and volume builders get consistent pricing, a single point of contact and documentation for every lot or dwelling.
Occupation certificates are often held up by a missing durable notice or vague installation records. Everything is supplied together so the certifier is not left chasing.
A barrier only works if it stays intact and visible. Homeowners should follow these points for the life of the building.
| Factor | Why it matters |
|---|---|
| Slab area and perimeter | A bigger footprint means more membrane, more perimeter work and more hours |
| System type | Full under-slab physical systems, perimeter-only systems and chemical or reticulation options are priced differently |
| Number of penetrations | Every plumbing and electrical penetration through the slab needs a collar |
| How complex the site is | Retaining walls, step-downs, sandstone excavation and suspended floors all add detailing |
| Visits to site | Staged installation tracks the build program, with multi-dwelling sites often combined |
Send your plans for a fixed, written quote. There's no charge to quote.
Clearing removes the trees, not the nests. Stumps and root systems left in the ground around Pyrmont developments keep colonies alive right under the new slabs.
Much of western and south-western Sydney sits on reactive clay that moves with moisture. Around Pyrmont that movement can open hairline paths underground where nothing is visible from the surface.
Anything attached to the structure is part of the structure as far as termites are concerned.
Licensed in NSW under 5122967, with all installations carried out to AS 3660.1.
We work around the builder's program so a barrier stage never delays the pour.
We supply the durable notice, the installation certificate and the product details.
Single dwellings, granny flats, duplexes and multi-unit developments.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteBarriers are quoted off your plans and slab details. There is no call-out charge in Pyrmont 2009. The final number comes down to the property itself, and it is fixed before we begin. You get the AS 3660.1 certificate and the durable notice for the meter box.
Same-day attendance is usually available. We are about 1.4 km west of the city here, and Pyrmont is covered by the Sydney CBD & Inner City team.
Waste is centralised in a tower - chutes, bin rooms, loading areas - and that concentration is what keeps termites fed. Height makes no difference; the risers are a staircase.
Nearly all units. That changes the method - gels and baits into cavities rather than anything sprayed across shared surfaces.
Yes - freestanding homes, townhouses, apartments, rentals and business premises in Pyrmont 2009 are all covered, with documentation suitable for an agent or a strata manager.
It is, applied properly. We put product into cracks, voids and stations rather than across open surfaces, and we will tell you what to stay off and for how long before we leave.
You do not normally need to leave. Anything requiring an empty room is short, and you will know about it before the work starts.
Between one and two hours covers the majority of jobs. We do not book so tightly that a technician has to cut a job short.
You get the AS 3660.1 certificate and the durable notice for the meter box. If it is not holding, call us - that is exactly what the warranty is for.
We cover the whole of Pyrmont, from the streets around Westfield Sydney out to the suburb boundary and on into Barangaroo.
Photographs from Elite jobs across Sydney — not stock imagery.
Fast and fully insured, with a no-obligation quote back to you within 30 minutes.