Repairing the damage
Do not start repairs yet. Early timber replacement can remove the feeding site, and the colony needs to be confirmed dead first. A builder should look at the bearers, studs and roof timbers.
Termite Control in Milsons Point 2061 — local technicians, fixed prices and a written report. Termite treatment starts from $179 and a full timber pest inspection from $159.
Real, verified feedback from people we've helped — straight from Google.
What we cover in Milsons Point, and how quickly we can get there.
Our Lower North Shore technicians cover Milsons Point and the rest of 2061 as a matter of course - it is only about 2.4 km north of the city. Our technicians are through Milsons Point most days, so same-day attendance is usually available.
If you are near Greenwood Plaza, Cammeray Golf Course or Milsons Point station, that is ground we cover constantly - it is the busiest part of Milsons Point for us.
This is the North Sydney, Mosman, Willoughby, Lane Cove and Hunters Hill area, and our runs here also take in Lavender Bay, McMahons Point and North Sydney. A lot of the housing here is older and close to the water, so sub-floors and lower levels hold damp - and damp is what keeps a population going.
What we see in Milsons Point is older homes near the water with a sub-floor that never fully dries. Describing it accurately when you book saves a second visit.
Beyond that we are regularly around Sydney Harbour National Park, and out as far as Secret Cove. If you are anywhere in 2061, you are inside the area we run.
Bookings for 2061 are confirmed the day before with a set arrival time, not an all-day window. Jobs at Lavender Bay and McMahons Point often share the same run, which is how earlier slots come up.
Swarming season around Milsons Point runs through the warmer, wetter months. A flight does not mean your house is infested, but it does mean a colony within flying distance has reached maturity.
A mature colony can run to a million workers and eat through structural timber steadily rather than dramatically. Most of the serious damage we find in Milsons Point homes accumulated over years in a wall nobody opened.
Anything that puts soil or timber against the structure is a bridge - planter boxes, sleeper walls, firewood stacked on the ground. Clearing those does more for a Milsons Point home than most products.
Photos from our own Sydney termite jobs. Most properties need one primary method, and some need two working together.

We install stations in the soil around the perimeter. They hold timber first; when termites start feeding on it we replace that with bait, and they take it home to the nest.

Stations are opened on a schedule to check for feeding and top up bait. Missed checks are a common reason baiting programs stall.

Bait fitted directly over live workings in a wall or frame. There is no waiting for termites to discover it - they are already there.

Termiticide applied into a trench along the footings, or injected through drilled holes in paths and slabs, creating a treated zone in the soil around the building.

The subfloor is included on suspended floors - soil around the piers and along the walls - since that is the usual starting point for activity nobody saw.

We show you where timber has been eaten so a builder can assess repairs, which should wait until the colony is confirmed dead.
What you do in the first day or two affects how quickly the colony can be eliminated.
Surface spray and bombs are the worst thing to use here. The colony retreats from the treated area and you lose the access point we needed.
Don't pull the workings apart. Exposed tubes dry and the colony retreats, which costs time on the treatment.
Photograph mud tubes, damaged timber or winged insects and note where you saw them. It helps us plan the visit.
Have a look for a dripping tap, a hot water overflow or an air conditioner drain near where you found them. Damp soil is an attractant and has to be dealt with as well.
Subterranean termites keep eating while you wait. Same-day and next-day inspections of active termites are available across Sydney.
In a unit or townhouse, activity in one lot often involves common property, so let the strata manager know early.
Get a licensed Sydney technician on the phone today - honest advice, fixed quote in 30 minutes.
Both are recognised approaches for existing buildings under AS 3660.2. The right choice depends on your property.
| Consideration | Baiting system | Chemical soil barrier | Combination |
|---|---|---|---|
| What it is for | Destroying the colony that is feeding on your building | Putting a treated zone in the soil, so termites moving through it are affected | Killing the colony that is there and guarding against the next |
| How it goes in | Stations in the soil around the perimeter, plus bait on active workings | Trenching along footings, and drilling and injecting through paths and slabs | Bait first, then the soil treatment once the colony is gone |
| Impact on the site | Minimal - we neither drill the paths nor dig out the beds | Drilled holes in paving, sealed on completion, plus digging along the beds | Divided across a staged series of visits |
| What it needs afterwards | The stations are checked on schedule and stay in place as monitoring | Service life is set by the product label and the site conditions; re-application is possible | Stations keep being checked alongside the working barrier |
| Typically chosen for | Active termites, sites under extensive paving, or where chemical input must be minimised | Properties where there is good access to the soil at the footings | Heavy activity, a history of attacks, or a high-risk bushland block |
Want more detail? Our guide to chemical, physical and baiting systems compares them side by side.
Termite treatment is a program over several visits, not a one-off spray.
Species confirmed, workings traced, and the roof void, subfloor and garden inspected to find where the nest and entry points are.
A fixed written quote: which method, which areas, which products, and how many follow-up visits it needs.
Treatment goes where the termites actually are - bait on the workings or in stations, or termiticide in the travelled soil.
We keep coming back to read the feeding and refill bait until the activity ends. How long that takes depends on the colony and the time of year.
With the colony eliminated, the next question is protection - a soil barrier, continued station monitoring, or both together.
Everything applied is recorded in writing, with the recommended date for your next timber pest inspection.
Treatment starts from $179. Your fixed quote comes after we've seen the activity.
| Factor | Why it changes the price |
|---|---|
| Extent of the attack | Contained activity in a single frame costs far less than termites spread across the subfloor and wall framing |
| The approach taken | Bait above ground, stations in the ground and a complete soil barrier are not comparable on product or labour |
| Access and perimeter | Long footings, restricted subfloor height and narrow passages down the side all add labour |
| Paving and slabs | Where a path, patio or garage slab has to be drilled and injected, it takes longer than open ground |
| Return visits | A baiting program runs until the colony is eliminated, and a big colony needs more visits to get there |
| Property type | Strata buildings, commercial sites and homes that have been extended are each scoped separately |
For typical scenarios, read how much termite treatment costs in Sydney. Warranty terms for termite work are confirmed in writing with your quote.
Do not start repairs yet. Early timber replacement can remove the feeding site, and the colony needs to be confirmed dead first. A builder should look at the bearers, studs and roof timbers.
In-ground stations sit flush with the soil and have locking lids. Don't move them, bury them under mulch or pour concrete over them. Tell us before landscaping so stations can be relocated.
A treated zone wants to be left alone. Building a garden bed, laying pavers or adding a deck against the house can breach it, so ring us before that work starts.
The standard, AS 3660.2, recommends an inspection at least annually and more frequently where risk is high. After a treatment, those inspections are how a new colony gets caught early.
Treatment removes the colony. These property conditions attract the next one, and most are cheap to fix.
We are around Sydney Harbour National Park and the surrounding streets regularly, and we inspect every address in 2061 - including the ones the big franchises will not travel to.
Pre-purchase is when this matters most. A report naming active termites or past damage in a Milsons Point house changes the price or the decision - but only if you have it before you sign.
Risk is partly about the street, not just the building. Old stumps, timber fences and untreated structures nearby all sustain colonies within foraging distance of a Milsons Point home.
Licensed in NSW under 5122967, with every termite job planned around AS 3660.2.
Finding the source comes before picking a treatment. Spraying the visible workers is not a plan.
A documented job: what was used, where, and when we returned - for your files, your insurer or whoever buys the place.
The follow-up visits are part of the program, so a baiting job does not get abandoned halfway.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteTermite treatment starts from $179 and a full timber pest inspection from $159. We quote on the property rather than the postcode, so a unit in Milsons Point and a large house are priced differently. The figure is fixed before any work starts. Treatments carry a 6-month warranty and we re-inspect annually.
Same-day attendance is usually available. Milsons Point sits roughly 2.4 km north of the CBD, inside our Lower North Shore run, so we book a time and keep to it.
Much of the housing near the harbour is old, with suspended floors and sub-floors that hold damp. Add mature gardens running to the boundary and termites have both shelter and moisture.
Period homes with sub-floors and mature gardens. The inspection covers the sub-floor, the perimeter and the planting, not just the interior.
Yes. We work in houses, units, strata blocks, rentals and commercial premises across Milsons Point 2061, and we provide the written report agents and strata managers ask for.
Yes, applied correctly. Products are registered for this use, placed out of reach rather than across open surfaces, and you will know what to stay off and for how long.
In most cases you can stay. Where an area does need to be left clear it is for a couple of hours at most, and we say so before we start.
Allow one to two hours for a typical Milsons Point property. Larger homes, or ones where the problem has spread, take longer and we will say so when we quote.
Treatments carry a 6-month warranty and we re-inspect annually. A return visit within the warranty period costs you nothing.
Yes - we work right across the North Sydney, Mosman, Willoughby, Lane Cove and Hunters Hill area, which takes in Milsons Point and the suburbs around it.
Photographs from Elite jobs across Sydney — not stock imagery.
Fully insured technicians who turn up when they say they will. Quote within 30 minutes, no obligation.