Repairing the damage
Wait for confirmation that the colony is dead before repairing anything. Pull out the timber too soon and you remove what they were feeding on. Get a builder to assess the structural members - bearers, studs, roof timbers.
Termite Control in Oatley 2223 — local technicians, fixed prices and a written report. Termite treatment starts from $179 and a full timber pest inspection from $159.
Real, verified feedback from people we've helped — straight from Google.
Where Oatley sits, who covers it and what it costs.
Our St George & Bayside technicians cover Oatley and the rest of 2223 as a matter of course - it is only about 17.6 km south-west of the city. We run Oatley on a regular route, and same-day attendance is usually available.
Our Oatley work takes in the streets by Hurstville Golf Course and Oatley station, through to Myrtle Street Road Closure Reserve at the other end.
The suburb sits in the Georges River and Bayside area. Mortdale, Hurstville Grove and Peakhurst Heights are all covered on the same day, so a problem that has spread across a boundary can be handled in one visit. The coastal damp is the part that matters: sub-floors and ground-floor wet areas rarely dry out properly.
The termite calls we take from Oatley are mostly ground-floor units with a damp sub-floor, and houses where the garage sits below the living level. If yours is one of them, mention it when you ring 1300 313 373 - it changes what the technician brings.
We also work the streets near Myles Dunphy Bushland Reserve and across toward Mortdale Plaza - the whole of 2223 is covered.
They eat from the inside out and leave the paint film intact, so a Oatley skirting board can look perfect and sound papery when you tap it. That hollow note is often the first real evidence.
Some species are destructive, some barely touch sound timber. We identify from the soldiers in the workings, because treating a Oatley home for the wrong one wastes the visit.
Anything that puts soil or timber against the structure is a bridge - planter boxes, sleeper walls, firewood stacked on the ground. Clearing those does more for a Oatley home than most products.
Photos from our own Sydney termite jobs. Most properties need one primary method, and some need two working together.

A ring of in-ground stations, each baited once termites are feeding. Because the workers carry it back to the nest, the colony itself is what gets eliminated rather than the ones you see.

Every station is opened on a set schedule so feeding can be assessed and bait replenished. Programs that fail usually failed because the checks lapsed.

Where termites are working inside a wall or door frame, bait can be fixed directly over the active workings so the colony starts feeding straight away.

A treated zone in the soil: termiticide trenched in along the footings, and injected through holes drilled in paving or slab where there is no open soil.

Suspended floors get the subfloor done too: the soil at the piers and along the walls, because that is where concealed attacks most often begin.

The eaten timber is identified and recorded so a builder can quote. Hold the repairs until the colony is confirmed dead or you may remove what they are feeding on.
What you do in the first day or two affects how quickly the colony can be eliminated.
Resist the spray can. You will kill a few workers and move the rest somewhere you cannot see, leaving nothing to bait.
Don't pull the workings apart. Exposed tubes dry and the colony retreats, which costs time on the treatment.
Photograph mud tubes, damaged timber or winged insects and note where you saw them. It helps us plan the visit.
Moisture is usually part of the story: a leaking tap, the hot water overflow, the air conditioner condensate line. Damp soil pulls termites in, so it needs fixing too.
They do not stop while you think about it. We hold same-day and next-day slots across Sydney for active termites.
Townhouse or unit? Notify the strata manager promptly, because common property is usually involved.
Talk to a licensed Sydney technician today - honest advice and a fixed quote within 30 minutes.
Both are recognised approaches for existing buildings under AS 3660.2. The right choice depends on your property.
| Consideration | Baiting system | Chemical soil barrier | Combination |
|---|---|---|---|
| What it is for | Destroying the colony that is feeding on your building | Putting a treated zone in the soil, so termites moving through it are affected | Killing the colony that is there and guarding against the next |
| Method of install | Soil stations round the perimeter and bait onto the workings themselves | Trenching at the footings with drilling and injection through hard surfaces | Bait phase first, soil barrier second |
| How intrusive it is | Low. Nothing drilled, nothing dug out of the garden | Paving gets small drill holes which are then sealed, and gardens get trenched | Spread over staged visits rather than one disruptive day |
| Ongoing maintenance | Regular scheduled station checks, which double as ongoing monitoring | How long it lasts comes down to the product label and the site, and it can be re-applied | The station checks carry on while the barrier does its job |
| Best suited to | Live activity, properties with a lot of paving, or where chemical use must be kept down | Houses with decent access to open soil along the footings | Serious activity, properties attacked before, or high-risk blocks near bush |
Want more detail? Our guide to chemical, physical and baiting systems compares them side by side.
Termite treatment is a program over several visits, not a one-off spray.
First the species, then the extent: we follow the mud tubing and workings and inspect the roof void, the subfloor and the garden for the nest and the way in.
You receive a fixed quote that names the method, the areas, the products and the return visits required.
Treatment goes where the termites actually are - bait on the workings or in stations, or termiticide in the travelled soil.
Follow-up visits continue until activity has stopped, checking and topping up bait each time. Colony size and season set the timeline.
With the colony eliminated, the next question is protection - a soil barrier, continued station monitoring, or both together.
Everything applied is recorded in writing, with the recommended date for your next timber pest inspection.
Treatment starts from $179. Your fixed quote comes after we've seen the activity.
| Factor | Why it changes the price |
|---|---|
| Where they are working | A single affected door frame is a small job; activity through the subfloor and wall frames is not |
| Method chosen | Above-ground baiting, in-ground stations and full soil barriers use different amounts of product and labour |
| Size and access | The longer the perimeter and the tighter the subfloor and side access, the longer the job |
| Hard surfaces | Drilling and injecting through paths, patios and garage slabs is slower than trenching open soil |
| Follow-up visits | Baiting needs return visits until the colony is gone, and larger colonies can need more of them |
| Type of building | Strata, commercial premises and houses with extensions or a granny flat all get scoped on their own |
For typical scenarios, read how much termite treatment costs in Sydney. Warranty terms for termite work are confirmed in writing with your quote.
Wait for confirmation that the colony is dead before repairing anything. Pull out the timber too soon and you remove what they were feeding on. Get a builder to assess the structural members - bearers, studs, roof timbers.
In-ground stations sit flush with the soil and have locking lids. Don't move them, bury them under mulch or pour concrete over them. Tell us before landscaping so stations can be relocated.
Treated soil works best left undisturbed. New garden beds, pavers or a deck against the house can break the treated zone, so call us before those works.
Annual inspections at minimum under AS 3660.2, and more frequently in high-risk locations. Once a property has had termites, those inspections are what protect it.
Treatment removes the colony. These property conditions attract the next one, and most are cheap to fix.
An old stump left in a Oatley backyard is a colony waiting to happen, and it sits metres from the house. Removing stumps and off-ground storing firewood costs nothing and removes a food source.
The St George & Bayside has its own pattern - the properties backing onto reserve, gully or paddock see the most pressure, and those are the ones where an annual inspection genuinely earns its cost.
Colonies forage over a wide area underground - tens of metres - so a stump, a timber retaining wall or an untreated deck on the adjoining block feeds a colony that can reach your Oatley house.
Licensed in NSW under 5122967, with every termite job planned around AS 3660.2.
Finding the source comes before picking a treatment. Spraying the visible workers is not a plan.
Products, areas and follow-ups all recorded, so you have the paperwork for your file, your insurer or a sale.
Return visits are included rather than optional, which is why our baiting programs actually finish.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteTermite treatment starts from $179 and a full timber pest inspection from $159. We quote on the property rather than the postcode, so a unit in Oatley and a large house are priced differently. The figure is fixed before any work starts. Treatments carry a 6-month warranty and we re-inspect annually.
Same-day attendance is usually available. Oatley is about 17.6 km south-west of the CBD in the St George & Bayside, and we give you a firm arrival time rather than an all-day window.
Being near the water means humidity that never really drops. Sub-floors stay moist, lower levels stay cool and damp, and termites do well in both.
Units close to the water, houses further back, and sub-floors that hold moisture in both.
Yes - freestanding homes, townhouses, apartments, rentals and business premises in Oatley 2223 are all covered, with documentation suitable for an agent or a strata manager.
It is, applied properly. We put product into cracks, voids and stations rather than across open surfaces, and we will tell you what to stay off and for how long before we leave.
Generally no. We will tell you on arrival if any part of the job means keeping out of a room for a while, so there are no surprises.
Most termite control jobs in a Oatley home take between one and two hours on site, depending on the size of the property and how much of it is affected.
Treatments carry a 6-month warranty and we re-inspect annually. So if they turn up again within the warranty, ring us and we will attend.
We do. Oatley and Mortdale, Hurstville Grove, Peakhurst Heights and Penshurst are all on the same route, which helps if you own more than one property in the area.
Photographs from Elite jobs across Sydney — not stock imagery.
Fast, friendly, fully insured technicians. No-obligation quote within 30 minutes.