Repairing the damage
Do not start repairs yet. Early timber replacement can remove the feeding site, and the colony needs to be confirmed dead first. A builder should look at the bearers, studs and roof timbers.
Termite Control in Galston 2159 — local technicians, fixed prices and a written report. Termite treatment starts from $179 and a full timber pest inspection from $159.
Real, verified feedback from people we've helped — straight from Google.
What we cover in Galston, and how quickly we can get there.
Galston sits about 28.8 km north-west of the CBD in the Upper North Shore, and postcode 2159 is one we are in most weeks. We cover Galston on scheduled runs through the Upper North Shore, and we will give you a firm time rather than a window.
Much of our Galston work is in the streets around Fagan Park.
We work under the Ku-ring-gai and Hornsby area here, and Middle Dural, Arcadia and Dural are all on the same route, which matters when termite problems are moving between adjoining properties. Backing onto bush means re-entry is the issue, so proofing and the perimeter do the real work here.
Galston jobs tend to be properties where the fence line matters as much as the kitchen. Let us know which when you ring and we will plan the visit around it.
Wherever you are in 2159, you are inside the area our technicians cover.
Bookings for 2159 are confirmed the day before with a set arrival time, not an all-day window. Jobs at Middle Dural and Arcadia often share the same run, which is how earlier slots come up.
People picture termites eating a house in a season. It is slower than that and worse: a colony works quietly inside the frame of a Galston house for years before anything shows on the surface.
Anything with cellulose in it is food: the frame, yes, but also joinery, floorboards, the lining paper on plasterboard, and the boxes stacked in the garage.
The slab edge is meant to be visible so workings show. In a lot of Galston properties landscaping has buried it, which hands termites an invisible route in.
Photos from our own Sydney termite jobs. Most properties need one primary method, and some need two working together.

We install stations in the soil around the perimeter. They hold timber first; when termites start feeding on it we replace that with bait, and they take it home to the nest.

Scheduled visits to inspect feeding and replace consumed bait. A baiting program only works if it is kept topped up, which is why the checks are part of it.

If there is active work inside a wall or architrave, we can mount bait straight onto it, which puts the colony onto bait immediately rather than waiting for them to find a station.

A continuous treated zone in the soil along the footings, applied by trenching and, under paving and slabs, by drilling and injecting.

Suspended floors get the subfloor done too: the soil at the piers and along the walls, because that is where concealed attacks most often begin.

We mark up where the timber has gone so a builder can assess structural work - scheduled after, not before, the colony is confirmed eliminated.
What you do in the first day or two affects how quickly the colony can be eliminated.
Surface spray and bombs are the worst thing to use here. The colony retreats from the treated area and you lose the access point we needed.
Leave the mud tubing and the damaged timber as you found it. Once broken open it dries out and termites abandon it.
Take pictures of anything you have seen and remember where. It tells us what to bring and where to start.
Check what is wetting the soil nearby: taps, hot water overflow, condensate lines. That damp is part of why they are there.
Subterranean termites feed continuously, so waiting costs timber. Same-day and next-day inspections are available right across Sydney.
If you are in a unit or townhouse, activity in your lot usually touches common property - tell the strata manager early.
One call to a licensed Sydney technician gets you straight advice and a fixed quote within 30 minutes.
Both are recognised approaches for existing buildings under AS 3660.2. The right choice depends on your property.
| Consideration | Baiting system | Chemical soil barrier | Combination |
|---|---|---|---|
| Main job | Eliminates the colony feeding on the building | Creates a treated zone so termites travelling through the soil are affected | Removes the active colony and protects against new ones |
| Method of install | Soil stations round the perimeter and bait onto the workings themselves | Trenching at the footings with drilling and injection through hard surfaces | Bait phase first, soil barrier second |
| Site disturbance | Almost none: no drilling through paths, no excavating garden beds | Small sealed drill holes in paving, and trenching where there are gardens | Spread across the staged visits |
| Looking after it | Stations get opened on a schedule and remain as a monitoring system | Label and site determine the service life; it can be re-applied later | Station monitoring continues for as long as the barrier is in service |
| Where it fits | Active termites, sites that are mostly paved, and cases where less chemical is preferred | Buildings where the soil around the footings is readily accessible | Heavy infestations, repeat attacks, and high-risk sites backing onto bushland |
Want more detail? Our guide to chemical, physical and baiting systems compares them side by side.
Termite treatment is a program over several visits, not a one-off spray.
First the species, then the extent: we follow the mud tubing and workings and inspect the roof void, the subfloor and the garden for the nest and the way in.
A fixed written quote: which method, which areas, which products, and how many follow-up visits it needs.
Bait goes onto active workings or into in-ground stations, or termiticide is applied to the soil where termites travel.
Return visits check feeding and top up bait until activity stops. Timing depends on colony size and season.
After elimination we advise on protection: a chemical soil barrier, ongoing monitoring through the stations, or a combination of the two.
Everything applied is recorded in writing, with the recommended date for your next timber pest inspection.
Treatment starts from $179. Your fixed quote comes after we've seen the activity.
| Factor | Why it changes the price |
|---|---|
| Where they are working | A single affected door frame is a small job; activity through the subfloor and wall frames is not |
| Which method is used | Above-ground bait, in-ground stations and a full soil barrier each take different product and labour |
| Size and access | The longer the perimeter and the tighter the subfloor and side access, the longer the job |
| Concrete to work through | Open soil can be trenched quickly; paths, patios and slabs have to be drilled and injected |
| Number of follow-ups | Return visits carry on until the colony is gone - larger colonies take more of them |
| Building type | Strata buildings, commercial sites and homes with extensions or granny flats are scoped individually |
For typical scenarios, read how much termite treatment costs in Sydney. Warranty terms for termite work are confirmed in writing with your quote.
Do not start repairs yet. Early timber replacement can remove the feeding site, and the colony needs to be confirmed dead first. A builder should look at the bearers, studs and roof timbers.
The in-ground stations are flush to the soil with locking lids. Leave them where they are - not buried in mulch, not concreted over - and tell us before any landscaping so we can relocate them.
Treated soil works best left undisturbed. New garden beds, pavers or a deck against the house can break the treated zone, so call us before those works.
The standard, AS 3660.2, recommends an inspection at least annually and more frequently where risk is high. After a treatment, those inspections are how a new colony gets caught early.
Treatment removes the colony. These property conditions attract the next one, and most are cheap to fix.
We are around Fagan Park and the surrounding streets regularly, and we inspect every address in 2159 - including the ones the big franchises will not travel to.
A timber pest inspection before exchange costs a fraction of what concealed damage costs afterwards, and it is the one point where you still have negotiating room on a Galston purchase.
The Upper North Shore has its own pattern - the properties backing onto reserve, gully or paddock see the most pressure, and those are the ones where an annual inspection genuinely earns its cost.
NSW timber pest licence 5122967, working to AS 3660.2 on existing buildings.
We locate where they are coming from first, then decide the method. Treating what you can see achieves very little.
A documented job: what was used, where, and when we returned - for your files, your insurer or whoever buys the place.
The program includes its own follow-ups, so baiting is never left part-done.
Everything you need to know before you book. Still unsure? Call us — we're happy to help.
Get a Free QuoteTermite treatment starts from $179 and a full timber pest inspection from $159. What changes the figure is the size of the building, how many areas are affected and the access. You get that number up front for Galston 2159, with no call-out fee. Treatments carry a 6-month warranty and we re-inspect annually.
We cover it on scheduled runs, so a day's notice gets you the best slot. Galston is about 28.8 km north-west of the CBD in the Upper North Shore, and we give you a firm arrival time rather than an all-day window.
Properties on a bush edge get re-supplied continuously. That is why our work in Galston is as much about the fence line and the perimeter as the inside of the house.
Homes with sub-floors, roof voids and bush at the boundary - all three get inspected.
We do. A lot of our Galston work is rentals and strata, so the report, the products used and the areas treated are all recorded in writing for whoever needs them.
It is, applied properly. We put product into cracks, voids and stations rather than across open surfaces, and we will tell you what to stay off and for how long before we leave.
You do not normally need to leave. Anything requiring an empty room is short, and you will know about it before the work starts.
Most termite control jobs in a Galston home take between one and two hours on site, depending on the size of the property and how much of it is affected.
Treatments carry a 6-month warranty and we re-inspect annually. A return visit inside that period does not cost you anything.
We do. Galston and Middle Dural, Arcadia, Dural and Kenthurst are all on the same route, which helps if you own more than one property in the area.
Photographs from Elite jobs across Sydney — not stock imagery.
Fast and fully insured, with a no-obligation quote back to you within 30 minutes.